[−][src]Trait gtk::PrintOperationExt

pub trait PrintOperationExt: 'static {
    fn cancel(&self);

    fn draw_page_finish(&self);

    fn get_default_page_setup(&self) -> Option<PageSetup>;

    fn get_embed_page_setup(&self) -> bool;

    fn get_error(&self) -> Result<(), Error>;

    fn get_has_selection(&self) -> bool;

    fn get_n_pages_to_print(&self) -> i32;

    fn get_print_settings(&self) -> Option<PrintSettings>;

    fn get_status(&self) -> PrintStatus;

    fn get_status_string(&self) -> Option<GString>;

    fn get_support_selection(&self) -> bool;

    fn is_finished(&self) -> bool;

    fn run<P: IsA<Window>>(
        &self, 
        action: PrintOperationAction, 
        parent: Option<&P>
    ) -> Result<PrintOperationResult, Error>;

    fn set_allow_async(&self, allow_async: bool);

    fn set_current_page(&self, current_page: i32);

    fn set_custom_tab_label(&self, label: Option<&str>);

    fn set_default_page_setup(&self, default_page_setup: Option<&PageSetup>);

    fn set_defer_drawing(&self);

    fn set_embed_page_setup(&self, embed: bool);

    fn set_export_filename<P: AsRef<Path>>(&self, filename: P);

    fn set_has_selection(&self, has_selection: bool);

    fn set_job_name(&self, job_name: &str);

    fn set_n_pages(&self, n_pages: i32);

    fn set_print_settings(&self, print_settings: Option<&PrintSettings>);

    fn set_show_progress(&self, show_progress: bool);

    fn set_support_selection(&self, support_selection: bool);

    fn set_track_print_status(&self, track_status: bool);

    fn set_unit(&self, unit: Unit);

    fn set_use_full_page(&self, full_page: bool);

    fn get_property_allow_async(&self) -> bool;

    fn get_property_current_page(&self) -> i32;

    fn get_property_custom_tab_label(&self) -> Option<GString>;

    fn get_property_export_filename(&self) -> Option<GString>;

    fn get_property_job_name(&self) -> Option<GString>;

    fn get_property_n_pages(&self) -> i32;

    fn get_property_show_progress(&self) -> bool;

    fn get_property_track_print_status(&self) -> bool;

    fn get_property_unit(&self) -> Unit;

    fn get_property_use_full_page(&self) -> bool;

    fn connect_begin_print<F: Fn(&Self, &PrintContext) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_create_custom_widget<F: Fn(&Self) -> Object + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_custom_widget_apply<F: Fn(&Self, &Widget) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_done<F: Fn(&Self, PrintOperationResult) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_draw_page<F: Fn(&Self, &PrintContext, i32) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_end_print<F: Fn(&Self, &PrintContext) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_paginate<F: Fn(&Self, &PrintContext) -> bool + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_preview<F: Fn(&Self, &PrintOperationPreview, &PrintContext, Option<&Window>) -> bool + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_request_page_setup<F: Fn(&Self, &PrintContext, i32, &PageSetup) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_status_changed<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_update_custom_widget<F: Fn(&Self, &Widget, &PageSetup, &PrintSettings) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_allow_async_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_current_page_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_custom_tab_label_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_default_page_setup_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_embed_page_setup_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_export_filename_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_has_selection_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_job_name_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_n_pages_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_n_pages_to_print_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_print_settings_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_show_progress_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_status_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_status_string_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_support_selection_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_track_print_status_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_unit_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;

    fn connect_property_use_full_page_notify<F: Fn(&Self) + 'static>(
        &self, 
        f: F
    ) -> SignalHandlerId;
}

Trait containing all PrintOperation methods.

Implementors

PrintOperation

Required methods

fn cancel(&self)

Cancels a running print operation. This function may be called from a PrintOperation::begin-print, PrintOperation::paginate or PrintOperation::draw-page signal handler to stop the currently running print operation.

fn draw_page_finish(&self)

Signalize that drawing of particular page is complete.

It is called after completion of page drawing (e.g. drawing in another thread). If PrintOperationExt::set_defer_drawing was called before, then this function has to be called by application. In another case it is called by the library itself.

fn get_default_page_setup(&self) -> Option<PageSetup>

Returns the default page setup, see PrintOperationExt::set_default_page_setup.

Returns

the default page setup

fn get_embed_page_setup(&self) -> bool

Gets the value of PrintOperation:embed-page-setup property.

Returns

whether page setup selection combos are embedded

fn get_error(&self) -> Result<(), Error>

Call this when the result of a print operation is PrintOperationResult::Error, either as returned by PrintOperationExt::run, or in the PrintOperation::done signal handler. The returned glib::Error will contain more details on what went wrong.

fn get_has_selection(&self) -> bool

Gets the value of PrintOperation:has-selection property.

Returns

whether there is a selection

fn get_n_pages_to_print(&self) -> i32

Returns the number of pages that will be printed.

Note that this value is set during print preparation phase (PrintStatus::Preparing), so this function should never be called before the data generation phase (PrintStatus::GeneratingData). You can connect to the PrintOperation::status-changed signal and call PrintOperationExt::get_n_pages_to_print when print status is PrintStatus::GeneratingData. This is typically used to track the progress of print operation.

Returns

the number of pages that will be printed

fn get_print_settings(&self) -> Option<PrintSettings>

Returns the current print settings.

Note that the return value is None until either PrintOperationExt::set_print_settings or PrintOperationExt::run have been called.

Returns

the current print settings of self.

fn get_status(&self) -> PrintStatus

Returns the status of the print operation. Also see PrintOperationExt::get_status_string.

Returns

the status of the print operation

fn get_status_string(&self) -> Option<GString>

Returns a string representation of the status of the print operation. The string is translated and suitable for displaying the print status e.g. in a Statusbar.

Use PrintOperationExt::get_status to obtain a status value that is suitable for programmatic use.

Returns

a string representation of the status of the print operation

fn get_support_selection(&self) -> bool

Gets the value of PrintOperation:support-selection property.

Returns

whether the application supports print of selection

fn is_finished(&self) -> bool

A convenience function to find out if the print operation is finished, either successfully (PrintStatus::Finished) or unsuccessfully (PrintStatus::FinishedAborted).

Note: when you enable print status tracking the print operation can be in a non-finished state even after done has been called, as the operation status then tracks the print job status on the printer.

Returns

true, if the print operation is finished.

fn run<P: IsA<Window>>(
    &self,
    action: PrintOperationAction,
    parent: Option<&P>
) -> Result<PrintOperationResult, Error>

Runs the print operation, by first letting the user modify print settings in the print dialog, and then print the document.

Normally that this function does not return until the rendering of all pages is complete. You can connect to the PrintOperation::status-changed signal on self to obtain some information about the progress of the print operation. Furthermore, it may use a recursive mainloop to show the print dialog.

If you call PrintOperationExt::set_allow_async or set the PrintOperation:allow-async property the operation will run asynchronously if this is supported on the platform. The PrintOperation::done signal will be emitted with the result of the operation when the it is done (i.e. when the dialog is canceled, or when the print succeeds or fails).

if (settings != NULL)
  gtk_print_operation_set_print_settings (print, settings);

if (page_setup != NULL)
  gtk_print_operation_set_default_page_setup (print, page_setup);

g_signal_connect (print, "begin-print",
                  G_CALLBACK (begin_print), &data);
g_signal_connect (print, "draw-page",
                  G_CALLBACK (draw_page), &data);

res = gtk_print_operation_run (print,
                               GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG,
                               parent,
                               &error);

if (res == GTK_PRINT_OPERATION_RESULT_ERROR)
 {
   error_dialog = gtk_message_dialog_new (GTK_WINDOW (parent),
                                   GTK_DIALOG_DESTROY_WITH_PARENT,
                         GTK_MESSAGE_ERROR,
                         GTK_BUTTONS_CLOSE,
                         "Error printing file:\n%s",
                         error->message);
   g_signal_connect (error_dialog, "response",
                     G_CALLBACK (gtk_widget_destroy), NULL);
   gtk_widget_show (error_dialog);
   g_error_free (error);
 }
else if (res == GTK_PRINT_OPERATION_RESULT_APPLY)
 {
   if (settings != NULL)
g_object_unref (settings);
   settings = g_object_ref (gtk_print_operation_get_print_settings (print));
 }

Note that PrintOperationExt::run can only be called once on a given PrintOperation.

action

the action to start

parent

Transient parent of the dialog

Returns

the result of the print operation. A return value of PrintOperationResult::Apply indicates that the printing was completed successfully. In this case, it is a good idea to obtain the used print settings with PrintOperationExt::get_print_settings and store them for reuse with the next print operation. A value of PrintOperationResult::InProgress means the operation is running asynchronously, and will emit the PrintOperation::done signal when done.

fn set_allow_async(&self, allow_async: bool)

Sets whether the PrintOperationExt::run may return before the print operation is completed. Note that some platforms may not allow asynchronous operation.

allow_async

true to allow asynchronous operation

fn set_current_page(&self, current_page: i32)

Sets the current page.

If this is called before PrintOperationExt::run, the user will be able to select to print only the current page.

Note that this only makes sense for pre-paginated documents.

current_page

the current page, 0-based

fn set_custom_tab_label(&self, label: Option<&str>)

Sets the label for the tab holding custom widgets.

label

the label to use, or None to use the default label

fn set_default_page_setup(&self, default_page_setup: Option<&PageSetup>)

Makes default_page_setup the default page setup for self.

This page setup will be used by PrintOperationExt::run, but it can be overridden on a per-page basis by connecting to the PrintOperation::request-page-setup signal.

default_page_setup

a PageSetup, or None

fn set_defer_drawing(&self)

Sets up the PrintOperation to wait for calling of PrintOperationExt::draw_page_finish from application. It can be used for drawing page in another thread.

This function must be called in the callback of “draw-page” signal.

fn set_embed_page_setup(&self, embed: bool)

Embed page size combo box and orientation combo box into page setup page. Selected page setup is stored as default page setup in PrintOperation.

embed

true to embed page setup selection in the GtkPrintUnixDialog

fn set_export_filename<P: AsRef<Path>>(&self, filename: P)

Sets up the PrintOperation to generate a file instead of showing the print dialog. The indended use of this function is for implementing “Export to PDF” actions. Currently, PDF is the only supported format.

“Print to PDF” support is independent of this and is done by letting the user pick the “Print to PDF” item from the list of printers in the print dialog.

filename

the filename for the exported file

fn set_has_selection(&self, has_selection: bool)

Sets whether there is a selection to print.

Application has to set number of pages to which the selection will draw by PrintOperationExt::set_n_pages in a callback of PrintOperation::begin-print.

has_selection

true indicates that a selection exists

fn set_job_name(&self, job_name: &str)

Sets the name of the print job. The name is used to identify the job (e.g. in monitoring applications like eggcups).

If you don’t set a job name, GTK+ picks a default one by numbering successive print jobs.

job_name

a string that identifies the print job

fn set_n_pages(&self, n_pages: i32)

Sets the number of pages in the document.

This must be set to a positive number before the rendering starts. It may be set in a PrintOperation::begin-print signal hander.

Note that the page numbers passed to the PrintOperation::request-page-setup and PrintOperation::draw-page signals are 0-based, i.e. if the user chooses to print all pages, the last ::draw-page signal will be for page n_pages - 1.

n_pages

the number of pages

fn set_print_settings(&self, print_settings: Option<&PrintSettings>)

Sets the print settings for self. This is typically used to re-establish print settings from a previous print operation, see PrintOperationExt::run.

PrintSettings

fn set_show_progress(&self, show_progress: bool)

If show_progress is true, the print operation will show a progress dialog during the print operation.

show_progress

true to show a progress dialog

fn set_support_selection(&self, support_selection: bool)

Sets whether selection is supported by PrintOperation.

support_selection

true to support selection

fn set_track_print_status(&self, track_status: bool)

If track_status is true, the print operation will try to continue report on the status of the print job in the printer queues and printer. This can allow your application to show things like “out of paper” issues, and when the print job actually reaches the printer.

This function is often implemented using some form of polling, so it should not be enabled unless needed.

track_status

true to track status after printing

fn set_unit(&self, unit: Unit)

Sets up the transformation for the cairo context obtained from PrintContext in such a way that distances are measured in units of unit.

unit

the unit to use

fn set_use_full_page(&self, full_page: bool)

If full_page is true, the transformation for the cairo context obtained from PrintContext puts the origin at the top left corner of the page (which may not be the top left corner of the sheet, depending on page orientation and the number of pages per sheet). Otherwise, the origin is at the top left corner of the imageable area (i.e. inside the margins).

full_page

true to set up the PrintContext for the full page

fn get_property_allow_async(&self) -> bool

Determines whether the print operation may run asynchronously or not.

Some systems don't support asynchronous printing, but those that do will return PrintOperationResult::InProgress as the status, and emit the PrintOperation::done signal when the operation is actually done.

The Windows port does not support asynchronous operation at all (this is unlikely to change). On other platforms, all actions except for PrintOperationAction::Export support asynchronous operation.

fn get_property_current_page(&self) -> i32

The current page in the document.

If this is set before PrintOperationExt::run, the user will be able to select to print only the current page.

Note that this only makes sense for pre-paginated documents.

fn get_property_custom_tab_label(&self) -> Option<GString>

Used as the label of the tab containing custom widgets. Note that this property may be ignored on some platforms.

If this is None, GTK+ uses a default label.

fn get_property_export_filename(&self) -> Option<GString>

The name of a file to generate instead of showing the print dialog. Currently, PDF is the only supported format.

The intended use of this property is for implementing “Export to PDF” actions.

“Print to PDF” support is independent of this and is done by letting the user pick the “Print to PDF” item from the list of printers in the print dialog.

fn get_property_job_name(&self) -> Option<GString>

A string used to identify the job (e.g. in monitoring applications like eggcups).

If you don't set a job name, GTK+ picks a default one by numbering successive print jobs.

fn get_property_n_pages(&self) -> i32

The number of pages in the document.

This must be set to a positive number before the rendering starts. It may be set in a PrintOperation::begin-print signal hander.

Note that the page numbers passed to the PrintOperation::request-page-setup and PrintOperation::draw-page signals are 0-based, i.e. if the user chooses to print all pages, the last ::draw-page signal will be for page n_pages - 1.

fn get_property_show_progress(&self) -> bool

Determines whether to show a progress dialog during the print operation.

fn get_property_track_print_status(&self) -> bool

If true, the print operation will try to continue report on the status of the print job in the printer queues and printer. This can allow your application to show things like “out of paper” issues, and when the print job actually reaches the printer. However, this is often implemented using polling, and should not be enabled unless needed.

fn get_property_unit(&self) -> Unit

The transformation for the cairo context obtained from PrintContext is set up in such a way that distances are measured in units of unit.

fn get_property_use_full_page(&self) -> bool

If true, the transformation for the cairo context obtained from PrintContext puts the origin at the top left corner of the page (which may not be the top left corner of the sheet, depending on page orientation and the number of pages per sheet). Otherwise, the origin is at the top left corner of the imageable area (i.e. inside the margins).

fn connect_begin_print<F: Fn(&Self, &PrintContext) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Emitted after the user has finished changing print settings in the dialog, before the actual rendering starts.

A typical use for ::begin-print is to use the parameters from the PrintContext and paginate the document accordingly, and then set the number of pages with PrintOperationExt::set_n_pages.

context

the PrintContext for the current operation

fn connect_create_custom_widget<F: Fn(&Self) -> Object + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Emitted when displaying the print dialog. If you return a widget in a handler for this signal it will be added to a custom tab in the print dialog. You typically return a container widget with multiple widgets in it.

The print dialog owns the returned widget, and its lifetime is not controlled by the application. However, the widget is guaranteed to stay around until the PrintOperation::custom-widget-apply signal is emitted on the operation. Then you can read out any information you need from the widgets.

Returns

A custom widget that gets embedded in the print dialog, or None

fn connect_custom_widget_apply<F: Fn(&Self, &Widget) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Emitted right before PrintOperation::begin-print if you added a custom widget in the PrintOperation::create-custom-widget handler. When you get this signal you should read the information from the custom widgets, as the widgets are not guaraneed to be around at a later time.

widget

the custom widget added in create-custom-widget

fn connect_done<F: Fn(&Self, PrintOperationResult) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Emitted when the print operation run has finished doing everything required for printing.

result gives you information about what happened during the run. If result is PrintOperationResult::Error then you can call PrintOperationExt::get_error for more information.

If you enabled print status tracking then PrintOperationExt::is_finished may still return false after PrintOperation::done was emitted.

result

the result of the print operation

fn connect_draw_page<F: Fn(&Self, &PrintContext, i32) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Emitted for every page that is printed. The signal handler must render the page_nr's page onto the cairo context obtained from context using PrintContext::get_cairo_context.

static void
draw_page (GtkPrintOperation *operation,
           GtkPrintContext   *context,
           gint               page_nr,
           gpointer           user_data)
{
  cairo_t *cr;
  PangoLayout *layout;
  gdouble width, text_height;
  gint layout_height;
  PangoFontDescription *desc;

  cr = gtk_print_context_get_cairo_context (context);
  width = gtk_print_context_get_width (context);

  cairo_rectangle (cr, 0, 0, width, HEADER_HEIGHT);

  cairo_set_source_rgb (cr, 0.8, 0.8, 0.8);
  cairo_fill (cr);

  layout = gtk_print_context_create_pango_layout (context);

  desc = pango_font_description_from_string ("sans 14");
  pango_layout_set_font_description (layout, desc);
  pango_font_description_free (desc);

  pango_layout_set_text (layout, "some text", -1);
  pango_layout_set_width (layout, width * PANGO_SCALE);
  pango_layout_set_alignment (layout, PANGO_ALIGN_CENTER);

  pango_layout_get_size (layout, NULL, &layout_height);
  text_height = (gdouble)layout_height / PANGO_SCALE;

  cairo_move_to (cr, width / 2,  (HEADER_HEIGHT - text_height) / 2);
  pango_cairo_show_layout (cr, layout);

  g_object_unref (layout);
}

Use PrintOperationExt::set_use_full_page and PrintOperationExt::set_unit before starting the print operation to set up the transformation of the cairo context according to your needs.

context

the PrintContext for the current operation

page_nr

the number of the currently printed page (0-based)

fn connect_end_print<F: Fn(&Self, &PrintContext) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Emitted after all pages have been rendered. A handler for this signal can clean up any resources that have been allocated in the PrintOperation::begin-print handler.

context

the PrintContext for the current operation

fn connect_paginate<F: Fn(&Self, &PrintContext) -> bool + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Emitted after the PrintOperation::begin-print signal, but before the actual rendering starts. It keeps getting emitted until a connected signal handler returns true.

The ::paginate signal is intended to be used for paginating a document in small chunks, to avoid blocking the user interface for a long time. The signal handler should update the number of pages using PrintOperationExt::set_n_pages, and return true if the document has been completely paginated.

If you don't need to do pagination in chunks, you can simply do it all in the ::begin-print handler, and set the number of pages from there.

context

the PrintContext for the current operation

Returns

true if pagination is complete

fn connect_preview<F: Fn(&Self, &PrintOperationPreview, &PrintContext, Option<&Window>) -> bool + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Gets emitted when a preview is requested from the native dialog.

The default handler for this signal uses an external viewer application to preview.

To implement a custom print preview, an application must return true from its handler for this signal. In order to use the provided context for the preview implementation, it must be given a suitable cairo context with PrintContext::set_cairo_context.

The custom preview implementation can use PrintOperationPreview::is_selected and PrintOperationPreview::render_page to find pages which are selected for print and render them. The preview must be finished by calling PrintOperationPreview::end_preview (typically in response to the user clicking a close button).

preview

the PrintOperationPreview for the current operation

context

the PrintContext that will be used

parent

the Window to use as window parent, or None

Returns

true if the listener wants to take over control of the preview

fn connect_request_page_setup<F: Fn(&Self, &PrintContext, i32, &PageSetup) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Emitted once for every page that is printed, to give the application a chance to modify the page setup. Any changes done to setup will be in force only for printing this page.

context

the PrintContext for the current operation

page_nr

the number of the currently printed page (0-based)

setup

the PageSetup

fn connect_status_changed<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Emitted at between the various phases of the print operation. See PrintStatus for the phases that are being discriminated. Use PrintOperationExt::get_status to find out the current status.

fn connect_update_custom_widget<F: Fn(&Self, &Widget, &PageSetup, &PrintSettings) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Emitted after change of selected printer. The actual page setup and print settings are passed to the custom widget, which can actualize itself according to this change.

widget

the custom widget added in create-custom-widget

setup

actual page setup

settings

actual print settings

fn connect_property_allow_async_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_current_page_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_custom_tab_label_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_default_page_setup_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_embed_page_setup_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_export_filename_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_has_selection_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_job_name_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_n_pages_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_n_pages_to_print_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_print_settings_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_show_progress_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_status_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_status_string_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_support_selection_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_track_print_status_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_unit_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

fn connect_property_use_full_page_notify<F: Fn(&Self) + 'static>(
    &self,
    f: F
) -> SignalHandlerId

Loading content...

Implementors

impl<O: IsA<PrintOperation>> PrintOperationExt for O[src]

Loading content...