// This file was generated by gir (https://github.com/gtk-rs/gir)
// from gir-files (https://github.com/gtk-rs/gir-files)
// DO NOT EDIT

use crate::{
    NumberUpLayout, PageRange, PageSet, PageSetup, PrintPages, PrintSettings, PrintStatus, Printer,
};
use glib::{
    prelude::*,
    signal::{connect_raw, SignalHandlerId},
    translate::*,
};
use std::{boxed::Box as Box_, fmt, mem, mem::transmute, ptr};

glib::wrapper! {
    /// A [`PrintJob`][crate::PrintJob] object represents a job that is sent to a printer.
    ///
    /// You only need to deal directly with print jobs if you use the
    /// non-portable [`PrintUnixDialog`][crate::PrintUnixDialog] API.
    ///
    /// Use [`surface()`][Self::surface()] to obtain the cairo surface
    /// onto which the pages must be drawn. Use [`send()`][Self::send()]
    /// to send the finished job to the printer. If you don’t use cairo
    /// [`PrintJob`][crate::PrintJob] also supports printing of manually generated PostScript,
    /// via [`set_source_file()`][Self::set_source_file()].
    ///
    /// ## Properties
    ///
    ///
    /// #### `page-setup`
    ///  Page setup.
    ///
    /// Readable | Writeable | Construct Only
    ///
    ///
    /// #### `printer`
    ///  The printer to send the job to.
    ///
    /// Readable | Writeable | Construct Only
    ///
    ///
    /// #### `settings`
    ///  Printer settings.
    ///
    /// Readable | Writeable | Construct Only
    ///
    ///
    /// #### `title`
    ///  The title of the print job.
    ///
    /// Readable | Writeable | Construct Only
    ///
    ///
    /// #### `track-print-status`
    ///  [`true`] if the print job will continue to emit status-changed
    /// signals after the print data has been setn to the printer.
    ///
    /// Readable | Writeable
    ///
    /// ## Signals
    ///
    ///
    /// #### `status-changed`
    ///  Emitted when the status of a job changes.
    ///
    /// The signal handler can use [`PrintJob::status()`][crate::PrintJob::status()]
    /// to obtain the new status.
    ///
    ///
    ///
    /// # Implements
    ///
    /// [`trait@glib::ObjectExt`]
    #[doc(alias = "GtkPrintJob")]
    pub struct PrintJob(Object<ffi::GtkPrintJob>);

    match fn {
        type_ => || ffi::gtk_print_job_get_type(),
    }
}

impl PrintJob {
    /// Creates a new [`PrintJob`][crate::PrintJob].
    /// ## `title`
    /// the job title
    /// ## `printer`
    /// a [`Printer`][crate::Printer]
    /// ## `settings`
    /// a [`PrintSettings`][crate::PrintSettings]
    /// ## `page_setup`
    /// a [`PageSetup`][crate::PageSetup]
    ///
    /// # Returns
    ///
    /// a new [`PrintJob`][crate::PrintJob]
    #[doc(alias = "gtk_print_job_new")]
    pub fn new(
        title: &str,
        printer: &Printer,
        settings: &PrintSettings,
        page_setup: &PageSetup,
    ) -> PrintJob {
        skip_assert_initialized!();
        unsafe {
            from_glib_full(ffi::gtk_print_job_new(
                title.to_glib_none().0,
                printer.to_glib_none().0,
                settings.to_glib_none().0,
                page_setup.to_glib_none().0,
            ))
        }
    }

    /// Gets whether this job is printed collated.
    ///
    /// # Returns
    ///
    /// whether the job is printed collated
    #[doc(alias = "gtk_print_job_get_collate")]
    #[doc(alias = "get_collate")]
    pub fn is_collate(&self) -> bool {
        unsafe { from_glib(ffi::gtk_print_job_get_collate(self.to_glib_none().0)) }
    }

    /// Gets the n-up setting for this job.
    ///
    /// # Returns
    ///
    /// the n-up setting
    #[doc(alias = "gtk_print_job_get_n_up")]
    #[doc(alias = "get_n_up")]
    pub fn n_up(&self) -> u32 {
        unsafe { ffi::gtk_print_job_get_n_up(self.to_glib_none().0) }
    }

    /// Gets the n-up layout setting for this job.
    ///
    /// # Returns
    ///
    /// the n-up layout
    #[doc(alias = "gtk_print_job_get_n_up_layout")]
    #[doc(alias = "get_n_up_layout")]
    pub fn n_up_layout(&self) -> NumberUpLayout {
        unsafe { from_glib(ffi::gtk_print_job_get_n_up_layout(self.to_glib_none().0)) }
    }

    /// Gets the number of copies of this job.
    ///
    /// # Returns
    ///
    /// the number of copies
    #[doc(alias = "gtk_print_job_get_num_copies")]
    #[doc(alias = "get_num_copies")]
    pub fn num_copies(&self) -> i32 {
        unsafe { ffi::gtk_print_job_get_num_copies(self.to_glib_none().0) }
    }

    /// Gets the page ranges for this job.
    ///
    /// # Returns
    ///
    /// a pointer to an
    ///   array of [`PageRange`][crate::PageRange] structs
    #[doc(alias = "gtk_print_job_get_page_ranges")]
    #[doc(alias = "get_page_ranges")]
    pub fn page_ranges(&self) -> Vec<PageRange> {
        unsafe {
            let mut n_ranges = mem::MaybeUninit::uninit();
            let ret = FromGlibContainer::from_glib_none_num(
                ffi::gtk_print_job_get_page_ranges(self.to_glib_none().0, n_ranges.as_mut_ptr()),
                n_ranges.assume_init() as _,
            );
            ret
        }
    }

    /// Gets the [`PageSet`][crate::PageSet] setting for this job.
    ///
    /// # Returns
    ///
    /// the [`PageSet`][crate::PageSet] setting
    #[doc(alias = "gtk_print_job_get_page_set")]
    #[doc(alias = "get_page_set")]
    pub fn page_set(&self) -> PageSet {
        unsafe { from_glib(ffi::gtk_print_job_get_page_set(self.to_glib_none().0)) }
    }

    /// Gets the [`PrintPages`][crate::PrintPages] setting for this job.
    ///
    /// # Returns
    ///
    /// the [`PrintPages`][crate::PrintPages] setting
    #[doc(alias = "gtk_print_job_get_pages")]
    #[doc(alias = "get_pages")]
    pub fn pages(&self) -> PrintPages {
        unsafe { from_glib(ffi::gtk_print_job_get_pages(self.to_glib_none().0)) }
    }

    /// Gets the [`Printer`][crate::Printer] of the print job.
    ///
    /// # Returns
    ///
    /// the printer of @self
    #[doc(alias = "gtk_print_job_get_printer")]
    #[doc(alias = "get_printer")]
    pub fn printer(&self) -> Printer {
        unsafe { from_glib_none(ffi::gtk_print_job_get_printer(self.to_glib_none().0)) }
    }

    /// Gets whether this job is printed reversed.
    ///
    /// # Returns
    ///
    /// whether the job is printed reversed.
    #[doc(alias = "gtk_print_job_get_reverse")]
    #[doc(alias = "get_reverse")]
    pub fn is_reverse(&self) -> bool {
        unsafe { from_glib(ffi::gtk_print_job_get_reverse(self.to_glib_none().0)) }
    }

    /// Gets whether the job is printed rotated.
    ///
    /// # Returns
    ///
    /// whether the job is printed rotated
    #[doc(alias = "gtk_print_job_get_rotate")]
    #[doc(alias = "get_rotate")]
    pub fn is_rotate(&self) -> bool {
        unsafe { from_glib(ffi::gtk_print_job_get_rotate(self.to_glib_none().0)) }
    }

    /// Gets the scale for this job.
    ///
    /// # Returns
    ///
    /// the scale
    #[doc(alias = "gtk_print_job_get_scale")]
    #[doc(alias = "get_scale")]
    pub fn scale(&self) -> f64 {
        unsafe { ffi::gtk_print_job_get_scale(self.to_glib_none().0) }
    }

    /// Gets the [`PrintSettings`][crate::PrintSettings] of the print job.
    ///
    /// # Returns
    ///
    /// the settings of @self
    #[doc(alias = "gtk_print_job_get_settings")]
    #[doc(alias = "get_settings")]
    pub fn settings(&self) -> PrintSettings {
        unsafe { from_glib_none(ffi::gtk_print_job_get_settings(self.to_glib_none().0)) }
    }

    /// Gets the status of the print job.
    ///
    /// # Returns
    ///
    /// the status of @self
    #[doc(alias = "gtk_print_job_get_status")]
    #[doc(alias = "get_status")]
    pub fn status(&self) -> PrintStatus {
        unsafe { from_glib(ffi::gtk_print_job_get_status(self.to_glib_none().0)) }
    }

    /// Gets a cairo surface onto which the pages of
    /// the print job should be rendered.
    ///
    /// # Returns
    ///
    /// the cairo surface of @self
    #[doc(alias = "gtk_print_job_get_surface")]
    #[doc(alias = "get_surface")]
    pub fn surface(&self) -> Result<cairo::Surface, glib::Error> {
        unsafe {
            let mut error = ptr::null_mut();
            let ret = ffi::gtk_print_job_get_surface(self.to_glib_none().0, &mut error);
            if error.is_null() {
                Ok(from_glib_none(ret))
            } else {
                Err(from_glib_full(error))
            }
        }
    }

    /// Gets the job title.
    ///
    /// # Returns
    ///
    /// the title of @self
    #[doc(alias = "gtk_print_job_get_title")]
    #[doc(alias = "get_title")]
    pub fn title(&self) -> glib::GString {
        unsafe { from_glib_none(ffi::gtk_print_job_get_title(self.to_glib_none().0)) }
    }

    /// Returns whether jobs will be tracked after printing.
    ///
    /// For details, see [`set_track_print_status()`][Self::set_track_print_status()].
    ///
    /// # Returns
    ///
    /// [`true`] if print job status will be reported after printing
    #[doc(alias = "gtk_print_job_get_track_print_status")]
    #[doc(alias = "get_track_print_status")]
    pub fn tracks_print_status(&self) -> bool {
        unsafe {
            from_glib(ffi::gtk_print_job_get_track_print_status(
                self.to_glib_none().0,
            ))
        }
    }

    /// Sets whether this job is printed collated.
    /// ## `collate`
    /// whether the job is printed collated
    #[doc(alias = "gtk_print_job_set_collate")]
    pub fn set_collate(&self, collate: bool) {
        unsafe {
            ffi::gtk_print_job_set_collate(self.to_glib_none().0, collate.into_glib());
        }
    }

    /// Sets the n-up setting for this job.
    /// ## `n_up`
    /// the n-up value
    #[doc(alias = "gtk_print_job_set_n_up")]
    pub fn set_n_up(&self, n_up: u32) {
        unsafe {
            ffi::gtk_print_job_set_n_up(self.to_glib_none().0, n_up);
        }
    }

    /// Sets the n-up layout setting for this job.
    /// ## `layout`
    /// the n-up layout setting
    #[doc(alias = "gtk_print_job_set_n_up_layout")]
    pub fn set_n_up_layout(&self, layout: NumberUpLayout) {
        unsafe {
            ffi::gtk_print_job_set_n_up_layout(self.to_glib_none().0, layout.into_glib());
        }
    }

    /// Sets the number of copies for this job.
    /// ## `num_copies`
    /// the number of copies
    #[doc(alias = "gtk_print_job_set_num_copies")]
    pub fn set_num_copies(&self, num_copies: i32) {
        unsafe {
            ffi::gtk_print_job_set_num_copies(self.to_glib_none().0, num_copies);
        }
    }

    /// Sets the page ranges for this job.
    /// ## `ranges`
    /// pointer to an array of
    ///    [`PageRange`][crate::PageRange] structs
    #[doc(alias = "gtk_print_job_set_page_ranges")]
    pub fn set_page_ranges(&self, ranges: &[PageRange]) {
        let n_ranges = ranges.len() as _;
        unsafe {
            ffi::gtk_print_job_set_page_ranges(
                self.to_glib_none().0,
                ranges.to_glib_full(),
                n_ranges,
            );
        }
    }

    /// Sets the [`PageSet`][crate::PageSet] setting for this job.
    /// ## `page_set`
    /// a [`PageSet`][crate::PageSet] setting
    #[doc(alias = "gtk_print_job_set_page_set")]
    pub fn set_page_set(&self, page_set: PageSet) {
        unsafe {
            ffi::gtk_print_job_set_page_set(self.to_glib_none().0, page_set.into_glib());
        }
    }

    /// Sets the [`PrintPages`][crate::PrintPages] setting for this job.
    /// ## `pages`
    /// the [`PrintPages`][crate::PrintPages] setting
    #[doc(alias = "gtk_print_job_set_pages")]
    pub fn set_pages(&self, pages: PrintPages) {
        unsafe {
            ffi::gtk_print_job_set_pages(self.to_glib_none().0, pages.into_glib());
        }
    }

    /// Sets whether this job is printed reversed.
    /// ## `reverse`
    /// whether the job is printed reversed
    #[doc(alias = "gtk_print_job_set_reverse")]
    pub fn set_reverse(&self, reverse: bool) {
        unsafe {
            ffi::gtk_print_job_set_reverse(self.to_glib_none().0, reverse.into_glib());
        }
    }

    /// Sets whether this job is printed rotated.
    /// ## `rotate`
    /// whether to print rotated
    #[doc(alias = "gtk_print_job_set_rotate")]
    pub fn set_rotate(&self, rotate: bool) {
        unsafe {
            ffi::gtk_print_job_set_rotate(self.to_glib_none().0, rotate.into_glib());
        }
    }

    /// Sets the scale for this job.
    ///
    /// 1.0 means unscaled.
    /// ## `scale`
    /// the scale
    #[doc(alias = "gtk_print_job_set_scale")]
    pub fn set_scale(&self, scale: f64) {
        unsafe {
            ffi::gtk_print_job_set_scale(self.to_glib_none().0, scale);
        }
    }

    /// Make the [`PrintJob`][crate::PrintJob] send an existing document to the
    /// printing system.
    ///
    /// The file can be in any format understood by the platforms
    /// printing system (typically PostScript, but on many platforms
    /// PDF may work too). See [`Printer::accepts_pdf()`][crate::Printer::accepts_pdf()] and
    /// [`Printer::accepts_ps()`][crate::Printer::accepts_ps()].
    ///
    /// This is similar to [`set_source_file()`][Self::set_source_file()],
    /// but takes expects an open file descriptor for the file,
    /// instead of a filename.
    /// ## `fd`
    /// a file descriptor
    ///
    /// # Returns
    ///
    /// [`false`] if an error occurred
    #[doc(alias = "gtk_print_job_set_source_fd")]
    pub fn set_source_fd(&self, fd: i32) -> Result<(), glib::Error> {
        unsafe {
            let mut error = ptr::null_mut();
            let is_ok = ffi::gtk_print_job_set_source_fd(self.to_glib_none().0, fd, &mut error);
            debug_assert_eq!(is_ok == glib::ffi::GFALSE, !error.is_null());
            if error.is_null() {
                Ok(())
            } else {
                Err(from_glib_full(error))
            }
        }
    }

    /// Make the [`PrintJob`][crate::PrintJob] send an existing document to the
    /// printing system.
    ///
    /// The file can be in any format understood by the platforms
    /// printing system (typically PostScript, but on many platforms
    /// PDF may work too). See [`Printer::accepts_pdf()`][crate::Printer::accepts_pdf()] and
    /// [`Printer::accepts_ps()`][crate::Printer::accepts_ps()].
    /// ## `filename`
    /// the file to be printed
    ///
    /// # Returns
    ///
    /// [`false`] if an error occurred
    #[doc(alias = "gtk_print_job_set_source_file")]
    pub fn set_source_file(
        &self,
        filename: impl AsRef<std::path::Path>,
    ) -> Result<(), glib::Error> {
        unsafe {
            let mut error = ptr::null_mut();
            let is_ok = ffi::gtk_print_job_set_source_file(
                self.to_glib_none().0,
                filename.as_ref().to_glib_none().0,
                &mut error,
            );
            debug_assert_eq!(is_ok == glib::ffi::GFALSE, !error.is_null());
            if error.is_null() {
                Ok(())
            } else {
                Err(from_glib_full(error))
            }
        }
    }

    /// If track_status is [`true`], the print job will try to continue report
    /// on the status of the print job in the printer queues and printer.
    ///
    /// This can allow your application to show things like “out of paper”
    /// issues, and when the print job actually reaches the printer.
    ///
    /// This function is often implemented using some form of polling,
    /// so it should not be enabled unless needed.
    /// ## `track_status`
    /// [`true`] to track status after printing
    #[doc(alias = "gtk_print_job_set_track_print_status")]
    pub fn set_track_print_status(&self, track_status: bool) {
        unsafe {
            ffi::gtk_print_job_set_track_print_status(
                self.to_glib_none().0,
                track_status.into_glib(),
            );
        }
    }

    /// Page setup.
    #[doc(alias = "page-setup")]
    pub fn page_setup(&self) -> Option<PageSetup> {
        glib::ObjectExt::property(self, "page-setup")
    }

    /// Emitted when the status of a job changes.
    ///
    /// The signal handler can use [`status()`][Self::status()]
    /// to obtain the new status.
    #[doc(alias = "status-changed")]
    pub fn connect_status_changed<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId {
        unsafe extern "C" fn status_changed_trampoline<F: Fn(&PrintJob) + 'static>(
            this: *mut ffi::GtkPrintJob,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            connect_raw(
                self.as_ptr() as *mut _,
                b"status-changed\0".as_ptr() as *const _,
                Some(transmute::<_, unsafe extern "C" fn()>(
                    status_changed_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }

    #[doc(alias = "track-print-status")]
    pub fn connect_track_print_status_notify<F: Fn(&Self) + 'static>(
        &self,
        f: F,
    ) -> SignalHandlerId {
        unsafe extern "C" fn notify_track_print_status_trampoline<F: Fn(&PrintJob) + 'static>(
            this: *mut ffi::GtkPrintJob,
            _param_spec: glib::ffi::gpointer,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            connect_raw(
                self.as_ptr() as *mut _,
                b"notify::track-print-status\0".as_ptr() as *const _,
                Some(transmute::<_, unsafe extern "C" fn()>(
                    notify_track_print_status_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }
}

impl fmt::Display for PrintJob {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        f.write_str("PrintJob")
    }
}