gtk4/auto/

signal_list_item_factory.rs

// This file was generated by gir (https://github.com/gtk-rs/gir)
// from gir-files (https://github.com/gtk-rs/gir-files)
// DO NOT EDIT

use crate::{ffi, ListItemFactory};
#[cfg(feature = "v4_8")]
#[cfg_attr(docsrs, doc(cfg(feature = "v4_8")))]
use glib::signal::{connect_raw, SignalHandlerId};
use glib::{prelude::*, translate::*};
#[cfg(feature = "v4_8")]
#[cfg_attr(docsrs, doc(cfg(feature = "v4_8")))]
use std::boxed::Box as Box_;

glib::wrapper! {
    /// [`SignalListItemFactory`][crate::SignalListItemFactory] is a [`ListItemFactory`][crate::ListItemFactory] that emits signals
    /// to manage listitems.
    ///
    /// Signals are emitted for every listitem in the same order:
    ///
    ///  1. [`setup`][struct@crate::SignalListItemFactory#setup] is emitted to set up permanent
    ///  things on the listitem. This usually means constructing the widgets used in
    ///  the row and adding them to the listitem.
    ///
    ///  2. [`bind`][struct@crate::SignalListItemFactory#bind] is emitted to bind the item passed
    ///  via [`item`][struct@crate::ListItem#item] to the widgets that have been created in
    ///  step 1 or to add item-specific widgets. Signals are connected to listen to
    ///  changes - both to changes in the item to update the widgets or to changes
    ///  in the widgets to update the item. After this signal has been called, the
    ///  listitem may be shown in a list widget.
    ///
    ///  3. [`unbind`][struct@crate::SignalListItemFactory#unbind] is emitted to undo everything
    ///  done in step 2. Usually this means disconnecting signal handlers. Once this
    ///  signal has been called, the listitem will no longer be used in a list
    ///  widget.
    ///
    ///  4. [`bind`][struct@crate::SignalListItemFactory#bind] and
    ///  [`unbind`][struct@crate::SignalListItemFactory#unbind] may be emitted multiple times
    ///  again to bind the listitem for use with new items. By reusing listitems,
    ///  potentially costly setup can be avoided. However, it means code needs to
    ///  make sure to properly clean up the listitem in step 3 so that no information
    ///  from the previous use leaks into the next use.
    ///
    /// 5. [`teardown`][struct@crate::SignalListItemFactory#teardown] is emitted to allow undoing
    /// the effects of [`setup`][struct@crate::SignalListItemFactory#setup]. After this signal
    /// was emitted on a listitem, the listitem will be destroyed and not be used again.
    ///
    /// Note that during the signal emissions, changing properties on the
    /// listitems passed will not trigger notify signals as the listitem's
    /// notifications are frozen. See g_object_freeze_notify() for details.
    ///
    /// For tracking changes in other properties in the listitem, the
    /// ::notify signal is recommended. The signal can be connected in the
    /// [`setup`][struct@crate::SignalListItemFactory#setup] signal and removed again during
    /// [`teardown`][struct@crate::SignalListItemFactory#teardown].
    ///
    /// ## Signals
    ///
    ///
    /// #### `bind`
    ///  Emitted when an object has been bound, for example when a
    /// new [`item`][struct@crate::ListItem#item] has been set on a
    /// listitem and should be bound for use.
    ///
    /// After this signal was emitted, the object might be shown in
    /// a [`ListView`][crate::ListView] or other widget.
    ///
    /// The [`unbind`][struct@crate::SignalListItemFactory#unbind] signal is the
    /// opposite of this signal and can be used to undo everything done
    /// in this signal.
    ///
    ///
    ///
    ///
    /// #### `setup`
    ///  Emitted when a new listitem has been created and needs to be setup for use.
    ///
    /// It is the first signal emitted for every listitem.
    ///
    /// The [`teardown`][struct@crate::SignalListItemFactory#teardown] signal is the opposite
    /// of this signal and can be used to undo everything done in this signal.
    ///
    ///
    ///
    ///
    /// #### `teardown`
    ///  Emitted when an object is about to be destroyed.
    ///
    /// It is the last signal ever emitted for this @object.
    ///
    /// This signal is the opposite of the [`setup`][struct@crate::SignalListItemFactory#setup]
    /// signal and should be used to undo everything done in that signal.
    ///
    ///
    ///
    ///
    /// #### `unbind`
    ///  Emitted when an object has been unbound from its item, for example when
    /// a listitem was removed from use in a list widget
    /// and its [`item`][struct@crate::ListItem#item] is about to be unset.
    ///
    /// This signal is the opposite of the [`bind`][struct@crate::SignalListItemFactory#bind]
    /// signal and should be used to undo everything done in that signal.
    ///
    ///
    ///
    /// # Implements
    ///
    /// [`ListItemFactoryExt`][trait@crate::prelude::ListItemFactoryExt], [`trait@glib::ObjectExt`]
    #[doc(alias = "GtkSignalListItemFactory")]
    pub struct SignalListItemFactory(Object<ffi::GtkSignalListItemFactory, ffi::GtkSignalListItemFactoryClass>) @extends ListItemFactory;

    match fn {
        type_ => || ffi::gtk_signal_list_item_factory_get_type(),
    }
}

impl SignalListItemFactory {
    /// Creates a new [`SignalListItemFactory`][crate::SignalListItemFactory].
    ///
    /// You need to connect signal handlers before you use it.
    ///
    /// # Returns
    ///
    /// a new [`SignalListItemFactory`][crate::SignalListItemFactory]
    #[doc(alias = "gtk_signal_list_item_factory_new")]
    pub fn new() -> SignalListItemFactory {
        assert_initialized_main_thread!();
        unsafe {
            ListItemFactory::from_glib_full(ffi::gtk_signal_list_item_factory_new()).unsafe_cast()
        }
    }

    /// Emitted when an object has been bound, for example when a
    /// new [`item`][struct@crate::ListItem#item] has been set on a
    /// listitem and should be bound for use.
    ///
    /// After this signal was emitted, the object might be shown in
    /// a [`ListView`][crate::ListView] or other widget.
    ///
    /// The [`unbind`][struct@crate::SignalListItemFactory#unbind] signal is the
    /// opposite of this signal and can be used to undo everything done
    /// in this signal.
    /// ## `object`
    /// The `GObject` to bind
    #[cfg(feature = "v4_8")]
    #[cfg_attr(docsrs, doc(cfg(feature = "v4_8")))]
    #[doc(alias = "bind")]
    pub fn connect_bind<F: Fn(&Self, &glib::Object) + 'static>(&self, f: F) -> SignalHandlerId {
        unsafe extern "C" fn bind_trampoline<
            F: Fn(&SignalListItemFactory, &glib::Object) + 'static,
        >(
            this: *mut ffi::GtkSignalListItemFactory,
            object: *mut glib::gobject_ffi::GObject,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this), &from_glib_borrow(object))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            connect_raw(
                self.as_ptr() as *mut _,
                b"bind\0".as_ptr() as *const _,
                Some(std::mem::transmute::<*const (), unsafe extern "C" fn()>(
                    bind_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }

    /// Emitted when a new listitem has been created and needs to be setup for use.
    ///
    /// It is the first signal emitted for every listitem.
    ///
    /// The [`teardown`][struct@crate::SignalListItemFactory#teardown] signal is the opposite
    /// of this signal and can be used to undo everything done in this signal.
    /// ## `object`
    /// The `GObject` to set up
    #[cfg(feature = "v4_8")]
    #[cfg_attr(docsrs, doc(cfg(feature = "v4_8")))]
    #[doc(alias = "setup")]
    pub fn connect_setup<F: Fn(&Self, &glib::Object) + 'static>(&self, f: F) -> SignalHandlerId {
        unsafe extern "C" fn setup_trampoline<
            F: Fn(&SignalListItemFactory, &glib::Object) + 'static,
        >(
            this: *mut ffi::GtkSignalListItemFactory,
            object: *mut glib::gobject_ffi::GObject,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this), &from_glib_borrow(object))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            connect_raw(
                self.as_ptr() as *mut _,
                b"setup\0".as_ptr() as *const _,
                Some(std::mem::transmute::<*const (), unsafe extern "C" fn()>(
                    setup_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }

    /// Emitted when an object is about to be destroyed.
    ///
    /// It is the last signal ever emitted for this @object.
    ///
    /// This signal is the opposite of the [`setup`][struct@crate::SignalListItemFactory#setup]
    /// signal and should be used to undo everything done in that signal.
    /// ## `object`
    /// The `GObject` to tear down
    #[cfg(feature = "v4_8")]
    #[cfg_attr(docsrs, doc(cfg(feature = "v4_8")))]
    #[doc(alias = "teardown")]
    pub fn connect_teardown<F: Fn(&Self, &glib::Object) + 'static>(&self, f: F) -> SignalHandlerId {
        unsafe extern "C" fn teardown_trampoline<
            F: Fn(&SignalListItemFactory, &glib::Object) + 'static,
        >(
            this: *mut ffi::GtkSignalListItemFactory,
            object: *mut glib::gobject_ffi::GObject,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this), &from_glib_borrow(object))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            connect_raw(
                self.as_ptr() as *mut _,
                b"teardown\0".as_ptr() as *const _,
                Some(std::mem::transmute::<*const (), unsafe extern "C" fn()>(
                    teardown_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }

    /// Emitted when an object has been unbound from its item, for example when
    /// a listitem was removed from use in a list widget
    /// and its [`item`][struct@crate::ListItem#item] is about to be unset.
    ///
    /// This signal is the opposite of the [`bind`][struct@crate::SignalListItemFactory#bind]
    /// signal and should be used to undo everything done in that signal.
    /// ## `object`
    /// The `GObject` to unbind
    #[cfg(feature = "v4_8")]
    #[cfg_attr(docsrs, doc(cfg(feature = "v4_8")))]
    #[doc(alias = "unbind")]
    pub fn connect_unbind<F: Fn(&Self, &glib::Object) + 'static>(&self, f: F) -> SignalHandlerId {
        unsafe extern "C" fn unbind_trampoline<
            F: Fn(&SignalListItemFactory, &glib::Object) + 'static,
        >(
            this: *mut ffi::GtkSignalListItemFactory,
            object: *mut glib::gobject_ffi::GObject,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this), &from_glib_borrow(object))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            connect_raw(
                self.as_ptr() as *mut _,
                b"unbind\0".as_ptr() as *const _,
                Some(std::mem::transmute::<*const (), unsafe extern "C" fn()>(
                    unbind_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }
}

impl Default for SignalListItemFactory {
    fn default() -> Self {
        Self::new()
    }
}