Trait OutputStreamExtManual

pub trait OutputStreamExtManual: IsA<OutputStream> + Sized {
    // Provided methods
    fn write_async<B: AsRef<[u8]> + Send + 'static, Q: FnOnce(Result<(B, usize), (B, Error)>) + 'static, C: IsA<Cancellable>>(
        &self,
        buffer: B,
        io_priority: Priority,
        cancellable: Option<&C>,
        callback: Q,
    ) { ... }
    fn write_all<C: IsA<Cancellable>>(
        &self,
        buffer: &[u8],
        cancellable: Option<&C>,
    ) -> Result<(usize, Option<Error>), Error> { ... }
    fn write_all_async<B: AsRef<[u8]> + Send + 'static, Q: FnOnce(Result<(B, usize, Option<Error>), (B, Error)>) + 'static, C: IsA<Cancellable>>(
        &self,
        buffer: B,
        io_priority: Priority,
        cancellable: Option<&C>,
        callback: Q,
    ) { ... }
    fn write_future<B: AsRef<[u8]> + Send + 'static>(
        &self,
        buffer: B,
        io_priority: Priority,
    ) -> Pin<Box<dyn Future<Output = Result<(B, usize), (B, Error)>> + 'static>> { ... }
    fn write_all_future<B: AsRef<[u8]> + Send + 'static>(
        &self,
        buffer: B,
        io_priority: Priority,
    ) -> Pin<Box<dyn Future<Output = Result<(B, usize, Option<Error>), (B, Error)>> + 'static>> { ... }
    fn writev(
        &self,
        vectors: &[OutputVector<'_>],
        cancellable: Option<&impl IsA<Cancellable>>,
    ) -> Result<usize, Error> { ... }
    fn writev_async<B: AsRef<[u8]> + Send + 'static, P: FnOnce(Result<(Vec<B>, usize), (Vec<B>, Error)>) + 'static>(
        &self,
        vectors: impl IntoIterator<Item = B> + 'static,
        io_priority: Priority,
        cancellable: Option<&impl IsA<Cancellable>>,
        callback: P,
    ) { ... }
    fn writev_future<B: AsRef<[u8]> + Send + 'static>(
        &self,
        vectors: impl IntoIterator<Item = B> + 'static,
        io_priority: Priority,
    ) -> Pin<Box<dyn Future<Output = Result<(Vec<B>, usize), (Vec<B>, Error)>> + 'static>> { ... }
    fn writev_all(
        &self,
        vectors: &[OutputVector<'_>],
        cancellable: Option<&impl IsA<Cancellable>>,
    ) -> Result<(usize, Option<Error>), Error> { ... }
    fn writev_all_async<B: AsRef<[u8]> + Send + 'static, P: FnOnce(Result<(Vec<B>, usize, Option<Error>), (Vec<B>, Error)>) + 'static>(
        &self,
        vectors: impl IntoIterator<Item = B> + 'static,
        io_priority: Priority,
        cancellable: Option<&impl IsA<Cancellable>>,
        callback: P,
    ) { ... }
    fn writev_all_future<B: AsRef<[u8]> + Send + 'static>(
        &self,
        vectors: impl IntoIterator<Item = B> + 'static,
        io_priority: Priority,
    ) -> Pin<Box<dyn Future<Output = Result<(Vec<B>, usize, Option<Error>), (Vec<B>, Error)>> + 'static>> { ... }
    fn into_write(self) -> OutputStreamWrite<Self> 
       where Self: IsA<OutputStream> { ... }
}

Provided Methods

fn write_async<B: AsRef<[u8]> + Send + 'static, Q: FnOnce(Result<(B, usize), (B, Error)>) + 'static, C: IsA<Cancellable>>( &self, buffer: B, io_priority: Priority, cancellable: Option<&C>, callback: Q, )

Request an asynchronous write of @count bytes from @buffer into the stream. When the operation is finished @callback will be called. You can then call g_output_stream_write_finish() to get the result of the operation.

During an async request no other sync and async calls are allowed, and will result in IOErrorEnum::Pending errors.

A value of @count larger than G_MAXSSIZE will cause a IOErrorEnum::InvalidArgument error.

On success, the number of bytes written will be passed to the @callback. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, but generally we try to write as many bytes as requested.

You are guaranteed that this method will never fail with IOErrorEnum::WouldBlock - if @self can’t accept more data, the method will just wait until this changes.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is G_PRIORITY_DEFAULT.

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one you must override all.

For the synchronous, blocking version of this function, see g_output_stream_write().

Note that no copy of @buffer will be made, so it must stay valid until @callback is called. See g_output_stream_write_bytes_async() for a #GBytes version that will automatically hold a reference to the contents (without copying) for the duration of the call.

buffer

the buffer containing the data to write.

io_priority

the io priority of the request.

cancellable

optional #GCancellable object, None to ignore.

callback

a #GAsyncReadyCallback to call when the request is satisfied

fn write_all<C: IsA<Cancellable>>( &self, buffer: &[u8], cancellable: Option<&C>, ) -> Result<(usize, Option<Error>), Error>

Tries to write @count bytes from @buffer into the stream. Will block during the operation.

This function is similar to g_output_stream_write(), except it tries to write as many bytes as requested, only stopping on an error.

On a successful write of @count bytes, true is returned, and @bytes_written is set to @count.

If there is an error during the operation false is returned and @error is set to indicate the error status.

As a special exception to the normal conventions for functions that use #GError, if this function returns false (and sets @error) then @bytes_written will be set to the number of bytes that were successfully written before the error was encountered. This functionality is only available from C. If you need it from another language then you must write your own loop around g_output_stream_write().

buffer

the buffer containing the data to write.

cancellable

optional #GCancellable object, None to ignore.

Returns

true on success, false if there was an error

bytes_written

location to store the number of bytes that was written to the stream

fn write_all_async<B: AsRef<[u8]> + Send + 'static, Q: FnOnce(Result<(B, usize, Option<Error>), (B, Error)>) + 'static, C: IsA<Cancellable>>( &self, buffer: B, io_priority: Priority, cancellable: Option<&C>, callback: Q, )

Request an asynchronous write of @count bytes from @buffer into the stream. When the operation is finished @callback will be called. You can then call g_output_stream_write_all_finish() to get the result of the operation.

This is the asynchronous version of g_output_stream_write_all().

Call g_output_stream_write_all_finish() to collect the result.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is G_PRIORITY_DEFAULT.

Note that no copy of @buffer will be made, so it must stay valid until @callback is called.

buffer

the buffer containing the data to write

io_priority

the io priority of the request

cancellable

optional #GCancellable object, None to ignore

callback

a #GAsyncReadyCallback to call when the request is satisfied

fn write_future<B: AsRef<[u8]> + Send + 'static>( &self, buffer: B, io_priority: Priority, ) -> Pin<Box<dyn Future<Output = Result<(B, usize), (B, Error)>> + 'static>>

fn write_all_future<B: AsRef<[u8]> + Send + 'static>( &self, buffer: B, io_priority: Priority, ) -> Pin<Box<dyn Future<Output = Result<(B, usize, Option<Error>), (B, Error)>> + 'static>>

fn writev( &self, vectors: &[OutputVector<'_>], cancellable: Option<&impl IsA<Cancellable>>, ) -> Result<usize, Error>

Available on crate feature v2_60 only.

Tries to write the bytes contained in the @n_vectors @vectors into the stream. Will block during the operation.

If @n_vectors is 0 or the sum of all bytes in @vectors is 0, returns 0 and does nothing.

On success, the number of bytes written to the stream is returned. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, or if there is not enough storage in the stream. All writes block until at least one byte is written or an error occurs; 0 is never returned (unless @n_vectors is 0 or the sum of all bytes in @vectors is 0).

If @cancellable is not None, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error IOErrorEnum::Cancelled will be returned. If an operation was partially finished when the operation was cancelled the partial result will be returned, without an error.

Some implementations of g_output_stream_writev() may have limitations on the aggregate buffer size, and will return IOErrorEnum::InvalidArgument if these are exceeded. For example, when writing to a local file on UNIX platforms, the aggregate buffer size must not exceed G_MAXSSIZE bytes.

vectors

the buffer containing the #GOutputVectors to write.

cancellable

optional cancellable object

Returns

true on success, false if there was an error

bytes_written

location to store the number of bytes that were written to the stream

fn writev_async<B: AsRef<[u8]> + Send + 'static, P: FnOnce(Result<(Vec<B>, usize), (Vec<B>, Error)>) + 'static>( &self, vectors: impl IntoIterator<Item = B> + 'static, io_priority: Priority, cancellable: Option<&impl IsA<Cancellable>>, callback: P, )

Available on crate feature v2_60 only.

Request an asynchronous write of the bytes contained in @n_vectors @vectors into the stream. When the operation is finished @callback will be called. You can then call g_output_stream_writev_finish() to get the result of the operation.

During an async request no other sync and async calls are allowed, and will result in IOErrorEnum::Pending errors.

On success, the number of bytes written will be passed to the @callback. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, but generally we try to write as many bytes as requested.

You are guaranteed that this method will never fail with IOErrorEnum::WouldBlock — if @self can’t accept more data, the method will just wait until this changes.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is G_PRIORITY_DEFAULT.

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one you must override all.

For the synchronous, blocking version of this function, see g_output_stream_writev().

Note that no copy of @vectors will be made, so it must stay valid until @callback is called.

vectors

the buffer containing the #GOutputVectors to write.

io_priority

the I/O priority of the request.

cancellable

optional #GCancellable object, None to ignore.

callback

a #GAsyncReadyCallback to call when the request is satisfied

fn writev_future<B: AsRef<[u8]> + Send + 'static>( &self, vectors: impl IntoIterator<Item = B> + 'static, io_priority: Priority, ) -> Pin<Box<dyn Future<Output = Result<(Vec<B>, usize), (Vec<B>, Error)>> + 'static>>

Available on crate feature v2_60 only.

fn writev_all( &self, vectors: &[OutputVector<'_>], cancellable: Option<&impl IsA<Cancellable>>, ) -> Result<(usize, Option<Error>), Error>

Available on crate feature v2_60 only.

Tries to write the bytes contained in the @n_vectors @vectors into the stream. Will block during the operation.

This function is similar to g_output_stream_writev(), except it tries to write as many bytes as requested, only stopping on an error.

On a successful write of all @n_vectors vectors, true is returned, and @bytes_written is set to the sum of all the sizes of @vectors.

If there is an error during the operation false is returned and @error is set to indicate the error status.

As a special exception to the normal conventions for functions that use #GError, if this function returns false (and sets @error) then @bytes_written will be set to the number of bytes that were successfully written before the error was encountered. This functionality is only available from C. If you need it from another language then you must write your own loop around g_output_stream_write().

The content of the individual elements of @vectors might be changed by this function.

vectors

the buffer containing the #GOutputVectors to write.

cancellable

optional #GCancellable object, None to ignore.

Returns

true on success, false if there was an error

bytes_written

location to store the number of bytes that were written to the stream

fn writev_all_async<B: AsRef<[u8]> + Send + 'static, P: FnOnce(Result<(Vec<B>, usize, Option<Error>), (Vec<B>, Error)>) + 'static>( &self, vectors: impl IntoIterator<Item = B> + 'static, io_priority: Priority, cancellable: Option<&impl IsA<Cancellable>>, callback: P, )

Available on crate feature v2_60 only.

Request an asynchronous write of the bytes contained in the @n_vectors @vectors into the stream. When the operation is finished @callback will be called. You can then call g_output_stream_writev_all_finish() to get the result of the operation.

This is the asynchronous version of g_output_stream_writev_all().

Call g_output_stream_writev_all_finish() to collect the result.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is G_PRIORITY_DEFAULT.

Note that no copy of @vectors will be made, so it must stay valid until @callback is called. The content of the individual elements of @vectors might be changed by this function.

vectors

the buffer containing the #GOutputVectors to write.

io_priority

the I/O priority of the request

cancellable

optional #GCancellable object, None to ignore

callback

a #GAsyncReadyCallback to call when the request is satisfied

fn writev_all_future<B: AsRef<[u8]> + Send + 'static>( &self, vectors: impl IntoIterator<Item = B> + 'static, io_priority: Priority, ) -> Pin<Box<dyn Future<Output = Result<(Vec<B>, usize, Option<Error>), (Vec<B>, Error)>> + 'static>>

Available on crate feature v2_60 only.

fn into_write(self) -> OutputStreamWrite<Self>

where Self: IsA<OutputStream>,

Dyn Compatibility

This trait is not dyn compatible.

In older versions of Rust, dyn compatibility was called "object safety", so this trait is not object safe.

Implementors

impl<O: IsA<OutputStream>> OutputStreamExtManual for O