Struct gio::DBusProxy

source ·
#[repr(transparent)]
pub struct DBusProxy { /* private fields */ }
Expand description

DBusProxy is a base class used for proxies to access a D-Bus interface on a remote object. A DBusProxy can be constructed for both well-known and unique names.

By default, DBusProxy will cache all properties (and listen to changes) of the remote object, and proxy all signals that get emitted. This behaviour can be changed by passing suitable DBusProxyFlags when the proxy is created. If the proxy is for a well-known name, the property cache is flushed when the name owner vanishes and reloaded when a name owner appears.

The unique name owner of the proxy’s name is tracked and can be read from property::DBusProxy::g-name-owner. Connect to the signal::glib::Object::notify signal to get notified of changes. Additionally, only signals and property changes emitted from the current name owner are considered and calls are always sent to the current name owner. This avoids a number of race conditions when the name is lost by one owner and claimed by another. However, if no name owner currently exists, then calls will be sent to the well-known name which may result in the message bus launching an owner (unless DBusProxyFlags::DO_NOT_AUTO_START is set).

If the proxy is for a stateless D-Bus service, where the name owner may be started and stopped between calls, the property::DBusProxy::g-name-owner tracking of DBusProxy will cause the proxy to drop signal and property changes from the service after it has restarted for the first time. When interacting with a stateless D-Bus service, do not use DBusProxy — use direct D-Bus method calls and signal connections.

The generic signal::DBusProxy::g-properties-changed and signal::DBusProxy::g-signal signals are not very convenient to work with. Therefore, the recommended way of working with proxies is to subclass DBusProxy, and have more natural properties and signals in your derived class. This [example][gdbus-example-gdbus-codegen] shows how this can easily be done using the [gdbus-codegen][gdbus-codegen] tool.

A DBusProxy instance can be used from multiple threads but note that all signals (e.g. signal::DBusProxy::g-signal, signal::DBusProxy::g-properties-changed and signal::glib::Object::notify) are emitted in the [thread-default main context][g-main-context-push-thread-default] of the thread where the instance was constructed.

An example using a proxy for a well-known name can be found in gdbus-example-watch-proxy.c

Implements

DBusProxyExt, glib::ObjectExt, AsyncInitableExt, DBusInterfaceExt, InitableExt, DBusProxyExtManual

Implementations§

source§

impl DBusProxy

source

pub const NONE: Option<&'static DBusProxy> = None

source

pub fn for_bus_sync( bus_type: BusType, flags: DBusProxyFlags, info: Option<&DBusInterfaceInfo>, name: &str, object_path: &str, interface_name: &str, cancellable: Option<&impl IsA<Cancellable>> ) -> Result<DBusProxy, Error>

Like new_sync() but takes a BusType instead of a DBusConnection.

DBusProxy is used in this [example][gdbus-wellknown-proxy].

bus_type

A BusType.

flags

Flags used when constructing the proxy.

info

A DBusInterfaceInfo specifying the minimal interface that proxy conforms to or None.

name

A bus name (well-known or unique).

object_path

An object path.

interface_name

A D-Bus interface name.

cancellable

A Cancellable or None.

Returns

A DBusProxy or None if error is set. Free with g_object_unref().

source

pub fn new_sync( connection: &DBusConnection, flags: DBusProxyFlags, info: Option<&DBusInterfaceInfo>, name: Option<&str>, object_path: &str, interface_name: &str, cancellable: Option<&impl IsA<Cancellable>> ) -> Result<DBusProxy, Error>

Creates a proxy for accessing interface_name on the remote object at object_path owned by name at connection and synchronously loads D-Bus properties unless the DBusProxyFlags::DO_NOT_LOAD_PROPERTIES flag is used.

If the DBusProxyFlags::DO_NOT_CONNECT_SIGNALS flag is not set, also sets up match rules for signals. Connect to the signal::DBusProxy::g-signal signal to handle signals from the remote object.

If both DBusProxyFlags::DO_NOT_LOAD_PROPERTIES and DBusProxyFlags::DO_NOT_CONNECT_SIGNALS are set, this constructor is guaranteed to return immediately without blocking.

If name is a well-known name and the DBusProxyFlags::DO_NOT_AUTO_START and DBusProxyFlags::DO_NOT_AUTO_START_AT_CONSTRUCTION flags aren’t set and no name owner currently exists, the message bus will be requested to launch a name owner for the name.

This is a synchronous failable constructor. See new() and g_dbus_proxy_new_finish() for the asynchronous version.

DBusProxy is used in this [example][gdbus-wellknown-proxy].

connection

A DBusConnection.

flags

Flags used when constructing the proxy.

info

A DBusInterfaceInfo specifying the minimal interface that proxy conforms to or None.

name

A bus name (well-known or unique) or None if connection is not a message bus connection.

object_path

An object path.

interface_name

A D-Bus interface name.

cancellable

A Cancellable or None.

Returns

A DBusProxy or None if error is set. Free with g_object_unref().

source

pub fn new<P: FnOnce(Result<DBusProxy, Error>) + 'static>( connection: &DBusConnection, flags: DBusProxyFlags, info: Option<&DBusInterfaceInfo>, name: Option<&str>, object_path: &str, interface_name: &str, cancellable: Option<&impl IsA<Cancellable>>, callback: P )

Creates a proxy for accessing interface_name on the remote object at object_path owned by name at connection and asynchronously loads D-Bus properties unless the DBusProxyFlags::DO_NOT_LOAD_PROPERTIES flag is used. Connect to the signal::DBusProxy::g-properties-changed signal to get notified about property changes.

If the DBusProxyFlags::DO_NOT_CONNECT_SIGNALS flag is not set, also sets up match rules for signals. Connect to the signal::DBusProxy::g-signal signal to handle signals from the remote object.

If both DBusProxyFlags::DO_NOT_LOAD_PROPERTIES and DBusProxyFlags::DO_NOT_CONNECT_SIGNALS are set, this constructor is guaranteed to complete immediately without blocking.

If name is a well-known name and the DBusProxyFlags::DO_NOT_AUTO_START and DBusProxyFlags::DO_NOT_AUTO_START_AT_CONSTRUCTION flags aren’t set and no name owner currently exists, the message bus will be requested to launch a name owner for the name.

This is a failable asynchronous constructor - when the proxy is ready, callback will be invoked and you can use g_dbus_proxy_new_finish() to get the result.

See new_sync() and for a synchronous version of this constructor.

DBusProxy is used in this [example][gdbus-wellknown-proxy].

connection

A DBusConnection.

flags

Flags used when constructing the proxy.

info

A DBusInterfaceInfo specifying the minimal interface that proxy conforms to or None.

name

A bus name (well-known or unique) or None if connection is not a message bus connection.

object_path

An object path.

interface_name

A D-Bus interface name.

cancellable

A Cancellable or None.

callback

Callback function to invoke when the proxy is ready.

source

pub fn new_future( connection: &DBusConnection, flags: DBusProxyFlags, info: Option<&DBusInterfaceInfo>, name: Option<&str>, object_path: &str, interface_name: &str ) -> Pin<Box_<dyn Future<Output = Result<DBusProxy, Error>> + 'static>>

source

pub fn for_bus<P: FnOnce(Result<DBusProxy, Error>) + 'static>( bus_type: BusType, flags: DBusProxyFlags, info: Option<&DBusInterfaceInfo>, name: &str, object_path: &str, interface_name: &str, cancellable: Option<&impl IsA<Cancellable>>, callback: P )

Like new() but takes a BusType instead of a DBusConnection.

DBusProxy is used in this [example][gdbus-wellknown-proxy].

bus_type

A BusType.

flags

Flags used when constructing the proxy.

info

A DBusInterfaceInfo specifying the minimal interface that proxy conforms to or None.

name

A bus name (well-known or unique).

object_path

An object path.

interface_name

A D-Bus interface name.

cancellable

A Cancellable or None.

callback

Callback function to invoke when the proxy is ready.

source

pub fn for_bus_future( bus_type: BusType, flags: DBusProxyFlags, info: Option<&DBusInterfaceInfo>, name: &str, object_path: &str, interface_name: &str ) -> Pin<Box_<dyn Future<Output = Result<DBusProxy, Error>> + 'static>>

Trait Implementations§

source§

impl Clone for DBusProxy

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for DBusProxy

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Display for DBusProxy

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Hash for DBusProxy

source§

fn hash<H>(&self, state: &mut H)where H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for DBusProxy

source§

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl ParentClassIs for DBusProxy

source§

impl<OT: ObjectType> PartialEq<OT> for DBusProxy

source§

fn eq(&self, other: &OT) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<OT: ObjectType> PartialOrd<OT> for DBusProxy

source§

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for DBusProxy

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl Eq for DBusProxy

source§

impl IsA<AsyncInitable> for DBusProxy

source§

impl IsA<DBusInterface> for DBusProxy

source§

impl IsA<Initable> for DBusProxy

source§

impl Send for DBusProxy

source§

impl Sync for DBusProxy

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Cast for Twhere T: ObjectType,

source§

fn upcast<T>(self) -> Twhere T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more
source§

fn upcast_ref<T>(&self) -> &Twhere T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more
source§

fn downcast<T>(self) -> Result<T, Self>where T: ObjectType, Self: CanDowncast<T>,

Tries to downcast to a subclass or interface implementor T. Read more
source§

fn downcast_ref<T>(&self) -> Option<&T>where T: ObjectType, Self: CanDowncast<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more
source§

fn dynamic_cast<T>(self) -> Result<T, Self>where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
source§

fn dynamic_cast_ref<T>(&self) -> Option<&T>where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
source§

unsafe fn unsafe_cast<T>(self) -> Twhere T: ObjectType,

Casts to T unconditionally. Read more
source§

unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere T: ObjectType,

Casts to &T unconditionally. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<U> IsSubclassableExt for Uwhere U: IsClass + ParentClassIs,

source§

impl<T> ObjectExt for Twhere T: ObjectType,

source§

fn is<U>(&self) -> boolwhere U: StaticType,

Returns true if the object is an instance of (can be cast to) T.
source§

fn type_(&self) -> Type

Returns the type of the object.
source§

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more
source§

fn class(&self) -> &Class<T>where T: IsClass,

Returns the class of the object.
source§

fn class_of<U>(&self) -> Option<&Class<U>>where U: IsClass,

Returns the class of the object in the given type T. Read more
source§

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where U: IsInterface,

Returns the interface T of the object. Read more
source§

fn try_set_property<V>( &self, property_name: &str, value: V ) -> Result<(), BoolError>where V: ToValue,

Similar to Self::set_property but fails instead of panicking.
source§

fn set_property<V>(&self, property_name: &str, value: V)where V: ToValue,

Sets the property property_name of the object to value value. Read more
source§

fn try_set_property_from_value( &self, property_name: &str, value: &Value ) -> Result<(), BoolError>

Similar to Self::set_property but fails instead of panicking.
source§

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more
source§

fn try_set_properties( &self, property_values: &[(&str, &dyn ToValue)] ) -> Result<(), BoolError>

Similar to Self::set_properties but fails instead of panicking.
source§

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more
source§

fn try_set_properties_from_value( &self, property_values: &[(&str, Value)] ) -> Result<(), BoolError>

Similar to Self::set_properties_from_value but fails instead of panicking.
source§

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more
source§

fn try_property<V>(&self, property_name: &str) -> Result<V, BoolError>where V: for<'b> FromValue<'b> + 'static,

Similar to Self::property but fails instead of panicking.
source§

fn property<V>(&self, property_name: &str) -> Vwhere V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more
source§

fn try_property_value(&self, property_name: &str) -> Result<Value, BoolError>

Similar to Self::property_value but fails instead of panicking.
source§

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more
source§

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_. Read more
source§

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more
source§

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.
source§

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.
source§

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more
source§

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn set_data<QD>(&self, key: &str, value: QD)where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more
source§

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.
source§

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.
source§

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.
source§

fn try_connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> Result<SignalHandlerId, BoolError>where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Similar to Self::connect but fails instead of panicking.
source§

fn connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn try_connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> Result<SignalHandlerId, BoolError>where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Similar to Self::connect_id but fails instead of panicking.
source§

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more
source§

fn try_connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> Result<SignalHandlerId, BoolError>where F: Fn(&[Value]) -> Option<Value> + 'static,

Similar to Self::connect_local but fails instead of panicking.
source§

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn try_connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> Result<SignalHandlerId, BoolError>where F: Fn(&[Value]) -> Option<Value> + 'static,

Similar to Self::connect_local_id but fails instead of panicking.
source§

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more
source§

unsafe fn try_connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> Result<SignalHandlerId, BoolError>where F: Fn(&[Value]) -> Option<Value>,

Similar to Self::connect_unsafe but fails instead of panicking.
source§

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more
source§

unsafe fn try_connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> Result<SignalHandlerId, BoolError>where F: Fn(&[Value]) -> Option<Value>,

Similar to Self::connect_unsafe_id but fails instead of panicking.
source§

fn try_connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> Result<SignalHandlerId, BoolError>

Similar to Self::connect_closure but fails instead of panicking.
source§

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more
source§

fn try_connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> Result<SignalHandlerId, BoolError>

Similar to Self::connect_closure_id but fails instead of panicking.
source§

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more
source§

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to Closure::invoke.
source§

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more
source§

fn try_emit<R>( &self, signal_id: SignalId, args: &[&dyn ToValue] ) -> Result<R, BoolError>where R: TryFromClosureReturnValue,

Similar to Self::emit but fails instead of panicking.
source§

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by signal id. Read more
source§

fn try_emit_with_values( &self, signal_id: SignalId, args: &[Value] ) -> Result<Option<Value>, BoolError>

Similar to Self::emit_with_values but fails instead of panicking.
source§

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.
source§

fn try_emit_by_name<R>( &self, signal_name: &str, args: &[&dyn ToValue] ) -> Result<R, BoolError>where R: TryFromClosureReturnValue,

Similar to Self::emit_by_name but fails instead of panicking.
source§

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by its name. Read more
source§

fn try_emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Result<Option<Value>, BoolError>

Similar to Self::emit_by_name_with_values but fails instead of panicking.
source§

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Option<Value>

Emit signal by its name. Read more
source§

fn try_emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> Result<R, BoolError>where R: TryFromClosureReturnValue,

Similar to Self::emit_by_name_with_details but fails instead of panicking.
source§

fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by its name with details. Read more
source§

fn try_emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Result<Option<Value>, BoolError>

Similar to Self::emit_by_name_with_details_and_values but fails instead of panicking.
source§

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by its name with details. Read more
source§

fn try_emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> Result<R, BoolError>where R: TryFromClosureReturnValue,

Similar to Self::emit_with_details but fails instead of panicking.
source§

fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by signal id with details. Read more
source§

fn try_emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Result<Option<Value>, BoolError>

Similar to Self::emit_with_details_and_values but fails instead of panicking.
source§

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by signal id with details. Read more
source§

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.
source§

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec) + Send + Sync + 'static,

Connect to the notify signal of the object. Read more
source§

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec) + 'static,

Connect to the notify signal of the object. Read more
source§

unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F ) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec),

Connect to the notify signal of the object. Read more
source§

fn notify(&self, property_name: &str)

Notify that the given property has changed its value. Read more
source§

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value. Read more
source§

fn downgrade(&self) -> WeakRef<T>

Downgrade this object to a weak reference.
source§

fn bind_property<O, 'a>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str ) -> BindingBuilder<'a>where O: ObjectType,

Bind property source_property on this object to the target_property on the target object. Read more
source§

fn ref_count(&self) -> u32

Returns the strong reference count of this object.
source§

impl<T> StaticTypeExt for Twhere T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToClosureReturnValue for Twhere T: ToValue,

source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToSendValue for Twhere T: Send + ToValue + ?Sized,

source§

fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for Twhere T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<Super, Sub> CanDowncast<Sub> for Superwhere Super: IsA<Super>, Sub: IsA<Super>,

source§

impl<'a, T, C> FromValueOptional<'a> for Twhere T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError>,