pub struct TlsCertificateFlags { /* private fields */ }
Expand description

A set of flags describing TLS certification validation. This can be used to describe why a particular certificate was rejected (for example, in signal::TlsConnection::accept-certificate).

GLib guarantees that if certificate verification fails, at least one flag will be set, but it does not guarantee that all possible flags will be set. Accordingly, you may not safely decide to ignore any particular type of error. For example, it would be incorrect to mask EXPIRED if you want to allow expired certificates, because this could potentially be the only error flag set even if other problems exist with the certificate.

Implementations§

source§

impl TlsCertificateFlags

source

pub const UNKNOWN_CA: Self = _

The signing certificate authority is not known.

source

pub const BAD_IDENTITY: Self = _

The certificate does not match the expected identity of the site that it was retrieved from.

source

pub const NOT_ACTIVATED: Self = _

The certificate’s activation time is still in the future

source

pub const EXPIRED: Self = _

The certificate has expired

source

pub const REVOKED: Self = _

The certificate has been revoked according to the TlsConnection’s certificate revocation list.

source

pub const INSECURE: Self = _

The certificate’s algorithm is considered insecure.

source

pub const GENERIC_ERROR: Self = _

Some other error occurred validating the certificate

source

pub const VALIDATE_ALL: Self = _

the combination of all of the above flags

source

pub const fn empty() -> Self

Returns an empty set of flags.

source

pub const fn all() -> Self

Returns the set containing all flags.

source

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

source

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

source

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

source

pub const unsafe fn from_bits_unchecked(bits: u32) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

source

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

source

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

source

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

source

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

source

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

source

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

source

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

source

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

source

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

source

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

source

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

source

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

source

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations§

source§

impl Binary for TlsCertificateFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl BitAnd<TlsCertificateFlags> for TlsCertificateFlags

source§

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

§

type Output = TlsCertificateFlags

The resulting type after applying the & operator.
source§

impl BitAndAssign<TlsCertificateFlags> for TlsCertificateFlags

source§

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

source§

impl BitOr<TlsCertificateFlags> for TlsCertificateFlags

source§

fn bitor(self, other: TlsCertificateFlags) -> Self

Returns the union of the two sets of flags.

§

type Output = TlsCertificateFlags

The resulting type after applying the | operator.
source§

impl BitOrAssign<TlsCertificateFlags> for TlsCertificateFlags

source§

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

source§

impl BitXor<TlsCertificateFlags> for TlsCertificateFlags

source§

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

§

type Output = TlsCertificateFlags

The resulting type after applying the ^ operator.
source§

impl BitXorAssign<TlsCertificateFlags> for TlsCertificateFlags

source§

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

source§

impl Clone for TlsCertificateFlags

source§

fn clone(&self) -> TlsCertificateFlags

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for TlsCertificateFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Display for TlsCertificateFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Extend<TlsCertificateFlags> for TlsCertificateFlags

source§

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator. Read more
source§

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)
Extends a collection with exactly one element.
source§

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)
Reserves capacity in a collection for the given number of additional elements. Read more
source§

impl FromIterator<TlsCertificateFlags> for TlsCertificateFlags

source§

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator. Read more
source§

impl<'a> FromValue<'a> for TlsCertificateFlags

§

type Checker = GenericValueTypeChecker<TlsCertificateFlags>

Value type checker.
source§

unsafe fn from_value(value: &'a Value) -> Self

Get the contained value from a Value. Read more
source§

impl Hash for TlsCertificateFlags

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl LowerHex for TlsCertificateFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Not for TlsCertificateFlags

source§

fn not(self) -> Self

Returns the complement of this set of flags.

§

type Output = TlsCertificateFlags

The resulting type after applying the ! operator.
source§

impl Octal for TlsCertificateFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Ord for TlsCertificateFlags

source§

fn cmp(&self, other: &TlsCertificateFlags) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl PartialEq<TlsCertificateFlags> for TlsCertificateFlags

source§

fn eq(&self, other: &TlsCertificateFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd<TlsCertificateFlags> for TlsCertificateFlags

source§

fn partial_cmp(&self, other: &TlsCertificateFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for TlsCertificateFlags

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl Sub<TlsCertificateFlags> for TlsCertificateFlags

source§

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

§

type Output = TlsCertificateFlags

The resulting type after applying the - operator.
source§

impl SubAssign<TlsCertificateFlags> for TlsCertificateFlags

source§

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

source§

impl ToValue for TlsCertificateFlags

source§

fn to_value(&self) -> Value

Convert a value to a Value.
source§

fn value_type(&self) -> Type

Returns the type identifer of self. Read more
source§

impl UpperHex for TlsCertificateFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl ValueType for TlsCertificateFlags

§

type Type = TlsCertificateFlags

Type to get the Type from. Read more
source§

impl Copy for TlsCertificateFlags

source§

impl Eq for TlsCertificateFlags

source§

impl StructuralEq for TlsCertificateFlags

source§

impl StructuralPartialEq for TlsCertificateFlags

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> StaticTypeExt for Twhere T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToClosureReturnValue for Twhere T: ToValue,

source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToSendValue for Twhere T: Send + ToValue + ?Sized,

source§

fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for Twhere T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.