Struct gio::TlsCertificateFlags

pub struct TlsCertificateFlags { /* private fields */ }

A set of flags describing TLS certification validation. This can be used to describe why a particular certificate was rejected (for example, in signal::TlsConnection::accept-certificate).

GLib guarantees that if certificate verification fails, at least one flag will be set, but it does not guarantee that all possible flags will be set. Accordingly, you may not safely decide to ignore any particular type of error. For example, it would be incorrect to mask EXPIRED if you want to allow expired certificates, because this could potentially be the only error flag set even if other problems exist with the certificate.

Implementations

impl TlsCertificateFlags

pub const UNKNOWN_CA: Self = _

The signing certificate authority is not known.

pub const BAD_IDENTITY: Self = _

The certificate does not match the expected identity of the site that it was retrieved from.

pub const NOT_ACTIVATED: Self = _

The certificate’s activation time is still in the future

pub const EXPIRED: Self = _

The certificate has expired

pub const REVOKED: Self = _

The certificate has been revoked according to the TlsConnection’s certificate revocation list.

pub const INSECURE: Self = _

The certificate’s algorithm is considered insecure.

pub const GENERIC_ERROR: Self = _

Some other error occurred validating the certificate

pub const VALIDATE_ALL: Self = _

the combination of all of the above flags

pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u32) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations

impl Binary for TlsCertificateFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd<TlsCertificateFlags> for TlsCertificateFlags

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

type Output = TlsCertificateFlags

The resulting type after applying the & operator.

impl BitAndAssign<TlsCertificateFlags> for TlsCertificateFlags

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

impl BitOr<TlsCertificateFlags> for TlsCertificateFlags

fn bitor(self, other: TlsCertificateFlags) -> Self

Returns the union of the two sets of flags.

type Output = TlsCertificateFlags

The resulting type after applying the | operator.

impl BitOrAssign<TlsCertificateFlags> for TlsCertificateFlags

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

impl BitXor<TlsCertificateFlags> for TlsCertificateFlags

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

type Output = TlsCertificateFlags

The resulting type after applying the ^ operator.

impl BitXorAssign<TlsCertificateFlags> for TlsCertificateFlags

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

impl Clone for TlsCertificateFlags

fn clone(&self) -> TlsCertificateFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for TlsCertificateFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for TlsCertificateFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<TlsCertificateFlags> for TlsCertificateFlags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<TlsCertificateFlags> for TlsCertificateFlags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator.

impl<'a> FromValue<'a> for TlsCertificateFlags

type Checker = GenericValueTypeChecker<TlsCertificateFlags>

Value type checker.

unsafe fn from_value(value: &'a Value) -> Self

Get the contained value from a Value.

impl Hash for TlsCertificateFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for TlsCertificateFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for TlsCertificateFlags

fn not(self) -> Self

Returns the complement of this set of flags.

type Output = TlsCertificateFlags

The resulting type after applying the ! operator.

impl Octal for TlsCertificateFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for TlsCertificateFlags

fn cmp(&self, other: &TlsCertificateFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval.

impl PartialEq<TlsCertificateFlags> for TlsCertificateFlags

fn eq(&self, other: &TlsCertificateFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<TlsCertificateFlags> for TlsCertificateFlags

fn partial_cmp(&self, other: &TlsCertificateFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl StaticType for TlsCertificateFlags

fn static_type() -> Type

Returns the type identifier of Self.

impl Sub<TlsCertificateFlags> for TlsCertificateFlags

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

type Output = TlsCertificateFlags

The resulting type after applying the - operator.

impl SubAssign<TlsCertificateFlags> for TlsCertificateFlags

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

impl ToValue for TlsCertificateFlags

fn to_value(&self) -> Value

Convert a value to a Value.

fn value_type(&self) -> Type

Returns the type identifer of self.

impl UpperHex for TlsCertificateFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl ValueType for TlsCertificateFlags

type Type = TlsCertificateFlags

Type to get the Type from.

impl Copy for TlsCertificateFlags

impl Eq for TlsCertificateFlags

impl StructuralEq for TlsCertificateFlags

impl StructuralPartialEq for TlsCertificateFlags