Struct gio::DBusProxyFlags

source ·
pub struct DBusProxyFlags(_);
Expand description

Flags used when constructing an instance of a DBusProxy derived class.

Implementations§

source§

impl DBusProxyFlags

source

pub const NONE: Self = _

No flags set.

source

pub const DO_NOT_LOAD_PROPERTIES: Self = _

Don’t load properties.

source

pub const DO_NOT_CONNECT_SIGNALS: Self = _

Don’t connect to signals on the remote object.

source

pub const DO_NOT_AUTO_START: Self = _

If the proxy is for a well-known name, do not ask the bus to launch an owner during proxy initialization or a method call. This flag is only meaningful in proxies for well-known names.

source

pub const GET_INVALIDATED_PROPERTIES: Self = _

If set, the property value for any invalidated property will be (asynchronously) retrieved upon receiving the PropertiesChanged D-Bus signal and the property will not cause emission of the g-properties-changed signal. When the value is received the g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32.

source

pub const DO_NOT_AUTO_START_AT_CONSTRUCTION: Self = _

If the proxy is for a well-known name, do not ask the bus to launch an owner during proxy initialization, but allow it to be autostarted by a method call. This flag is only meaningful in proxies for well-known names, and only if DO_NOT_AUTO_START is not also specified.

source

pub const NO_MATCH_RULE: Self = _

Available on crate feature v2_70 only.

Don’t actually send the AddMatch D-Bus call for this signal subscription. This gives you more control over which match rules you add (but you must add them manually). (Since: 2.72)

source§

impl DBusProxyFlags

source

pub const fn empty() -> Self

Returns an empty set of flags.

source

pub const fn all() -> Self

Returns the set containing all flags.

source

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

source

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

source

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

source

pub const fn from_bits_retain(bits: u32) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

source

pub fn from_name(name: &str) -> Option<Self>

Get the value for a flag from its stringified name.

Names are case-sensitive, so must correspond exactly to the identifier given to the flag.

source

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

source

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

source

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

source

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

source

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

This method is equivalent to union.

source

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

This method is equivalent to difference.

source

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

This method is equivalent to symmetric_difference.

source

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

source

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Calculating self bitwise and (&) other, including any bits that don’t correspond to a defined flag.

source

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Calculates self bitwise or (|) other, including any bits that don’t correspond to a defined flag.

source

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Calculates self bitwise and (&!) the bitwise negation of other, including any bits that don’t correspond to a defined flag.

This method is not equivalent to a & !b when there are bits set that don’t correspond to a defined flag. The ! operator will unset any bits that don’t correspond to a flag, so they’ll always be unset by a &! b, but respected by a.difference(b).

source

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Calculates self bitwise exclusive or (^) other, including any bits that don’t correspond to a defined flag.

source

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Calculates the bitwise negation (!) of self, unsetting any bits that don’t correspond to a defined flag.

source§

impl DBusProxyFlags

source

pub const fn iter(&self) -> Iter<DBusProxyFlags>

Iterate over enabled flag values.

source

pub const fn iter_names(&self) -> IterNames<DBusProxyFlags>

Iterate over enabled flag values with their stringified names.

Trait Implementations§

source§

impl Binary for DBusProxyFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl BitAnd<DBusProxyFlags> for DBusProxyFlags

source§

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

§

type Output = DBusProxyFlags

The resulting type after applying the & operator.
source§

impl BitAndAssign<DBusProxyFlags> for DBusProxyFlags

source§

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

source§

impl BitOr<DBusProxyFlags> for DBusProxyFlags

source§

fn bitor(self, other: DBusProxyFlags) -> Self

Returns the union of the two sets of flags.

§

type Output = DBusProxyFlags

The resulting type after applying the | operator.
source§

impl BitOrAssign<DBusProxyFlags> for DBusProxyFlags

source§

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

source§

impl BitXor<DBusProxyFlags> for DBusProxyFlags

source§

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

§

type Output = DBusProxyFlags

The resulting type after applying the ^ operator.
source§

impl BitXorAssign<DBusProxyFlags> for DBusProxyFlags

source§

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

source§

impl Clone for DBusProxyFlags

source§

fn clone(&self) -> DBusProxyFlags

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for DBusProxyFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Display for DBusProxyFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Extend<DBusProxyFlags> for DBusProxyFlags

source§

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator. Read more
source§

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)
Extends a collection with exactly one element.
source§

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)
Reserves capacity in a collection for the given number of additional elements. Read more
source§

impl Flags for DBusProxyFlags

source§

const FLAGS: &'static [Flag<DBusProxyFlags>] = _

The set of available flags and their names.
§

type Bits = u32

The underlying storage type.
source§

fn bits(&self) -> u32

Returns the raw value of the flags currently stored.
source§

fn from_bits_retain(bits: u32) -> DBusProxyFlags

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
source§

fn empty() -> Self

Returns an empty set of flags.
source§

fn all() -> Self

Returns the set containing all flags.
source§

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag. Read more
source§

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags. Read more
source§

fn from_name(name: &str) -> Option<Self>

Get the flag for a particular name.
source§

fn iter(&self) -> Iter<Self>

Iterate over enabled flag values.
source§

fn iter_names(&self) -> IterNames<Self>

Iterate over the raw names and bits for enabled flag values.
source§

fn is_empty(&self) -> bool

Returns true if no flags are currently stored.
source§

fn is_all(&self) -> bool

Returns true if all flags are currently set.
source§

fn intersects(&self, other: Self) -> boolwhere Self: Sized,

Returns true if there are flags common to both self and other.
source§

fn contains(&self, other: Self) -> boolwhere Self: Sized,

Returns true if all of the flags in other are contained within self.
source§

fn insert(&mut self, other: Self)where Self: Sized,

Inserts the specified flags in-place. Read more
source§

fn remove(&mut self, other: Self)where Self: Sized,

Removes the specified flags in-place. Read more
source§

fn toggle(&mut self, other: Self)where Self: Sized,

Toggles the specified flags in-place. Read more
source§

fn set(&mut self, other: Self, value: bool)where Self: Sized,

Inserts or removes the specified flags depending on the passed value.
source§

fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.
source§

fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.
source§

fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.
source§

fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.
source§

fn complement(self) -> Self

Returns the complement of this set of flags.
source§

impl From<DBusProxyFlags> for Value

source§

fn from(v: DBusProxyFlags) -> Self

Converts to this type from the input type.
source§

impl FromIterator<DBusProxyFlags> for DBusProxyFlags

source§

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator. Read more
source§

impl<'a> FromValue<'a> for DBusProxyFlags

§

type Checker = GenericValueTypeChecker<DBusProxyFlags>

Value type checker.
source§

unsafe fn from_value(value: &'a Value) -> Self

Get the contained value from a Value. Read more
source§

impl HasParamSpec for DBusProxyFlags

§

type ParamSpec = ParamSpecFlags

§

type SetValue = DBusProxyFlags

Preferred value to be used as setter for the associated ParamSpec.
§

type BuilderFn = fn(_: &str) -> ParamSpecFlagsBuilder<'_, DBusProxyFlags>

source§

fn param_spec_builder() -> Self::BuilderFn

source§

impl Hash for DBusProxyFlags

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl IntoIterator for DBusProxyFlags

§

type Item = DBusProxyFlags

The type of the elements being iterated over.
§

type IntoIter = Iter<DBusProxyFlags>

Which kind of iterator are we turning this into?
source§

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value. Read more
source§

impl LowerHex for DBusProxyFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Not for DBusProxyFlags

source§

fn not(self) -> Self

Returns the complement of this set of flags.

§

type Output = DBusProxyFlags

The resulting type after applying the ! operator.
source§

impl Octal for DBusProxyFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl PartialEq<DBusProxyFlags> for DBusProxyFlags

source§

fn eq(&self, other: &DBusProxyFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PublicFlags for DBusProxyFlags

§

type Primitive = u32

The type of the underlying storage.
§

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.
source§

impl StaticType for DBusProxyFlags

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl Sub<DBusProxyFlags> for DBusProxyFlags

source§

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

§

type Output = DBusProxyFlags

The resulting type after applying the - operator.
source§

impl SubAssign<DBusProxyFlags> for DBusProxyFlags

source§

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

source§

impl ToValue for DBusProxyFlags

source§

fn to_value(&self) -> Value

Convert a value to a Value.
source§

fn value_type(&self) -> Type

Returns the type identifer of self. Read more
source§

impl UpperHex for DBusProxyFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl ValueType for DBusProxyFlags

§

type Type = DBusProxyFlags

Type to get the Type from. Read more
source§

impl Copy for DBusProxyFlags

source§

impl Eq for DBusProxyFlags

source§

impl StructuralEq for DBusProxyFlags

source§

impl StructuralPartialEq for DBusProxyFlags

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<B> BitFlags for Bwhere B: Flags,

§

type Iter = Iter<B>

👎Deprecated: use the Flags trait instead
An iterator over enabled flags in an instance of the type.
§

type IterNames = IterNames<B>

👎Deprecated: use the Flags trait instead
An iterator over the raw names and bits for enabled flags in an instance of the type.
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoClosureReturnValue for Twhere T: Into<Value>,

source§

impl<T> Property for Twhere T: HasParamSpec,

§

type Value = T

source§

impl<T> PropertyGet for Twhere T: HasParamSpec,

§

type Value = T

source§

fn get<R, F>(&self, f: F) -> Rwhere F: Fn(&<T as PropertyGet>::Value) -> R,

source§

impl<T> StaticTypeExt for Twhere T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToSendValue for Twhere T: Send + ToValue + ?Sized,

source§

fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for Twhere T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.