Struct gsk4::ConicGradientNode

source ·
#[repr(transparent)]
pub struct ConicGradientNode { /* private fields */ }
Expand description

A render node for a conic gradient.

Implementations§

source§

impl ConicGradientNode

source

pub fn new( bounds: &Rect, center: &Point, rotation: f32, color_stops: &[ColorStop] ) -> ConicGradientNode

Creates a RenderNode that draws a conic gradient.

The conic gradient starts around @center in the direction of @rotation. A rotation of 0 means that the gradient points up. Color stops are then added clockwise.

bounds

the bounds of the node

center

the center of the gradient

rotation

the rotation of the gradient in degrees

color_stops

a pointer to an array of ColorStop defining the gradient. The offsets of all color stops must be increasing. The first stop’s offset must be >= 0 and the last stop’s offset must be <= 1.

Returns

A new RenderNode

source

pub fn angle(&self) -> f32

Available on crate feature v4_2 only.

Retrieves the angle for the gradient in radians, normalized in [0, 2 * PI].

The angle is starting at the top and going clockwise, as expressed in the css specification:

angle = 90 - gsk_conic_gradient_node_get_rotation()
Returns

the angle for the gradient

source

pub fn center(&self) -> Point

Retrieves the center pointer for the gradient.

Returns

the center point for the gradient

source

pub fn color_stops(&self) -> Vec<ColorStop>

Retrieves the color stops in the gradient.

Returns

the color stops in the gradient

source

pub fn n_color_stops(&self) -> usize

Retrieves the number of color stops in the gradient.

Returns

the number of color stops

source

pub fn rotation(&self) -> f32

Retrieves the rotation for the gradient in degrees.

Returns

the rotation for the gradient

Methods from Deref<Target = RenderNode>§

source

pub const NONE: Option<&'static RenderNode> = None

source

pub fn draw(&self, cr: &Context)

Draw the contents of @self to the given cairo context.

Typically, you’ll use this function to implement fallback rendering of RenderNodes on an intermediate Cairo context, instead of using the drawing context associated to a gdk::Surface’s rendering buffer.

For advanced nodes that cannot be supported using Cairo, in particular for nodes doing 3D operations, this function may fail.

cr

cairo context to draw to

source

pub fn bounds(&self) -> Rect

Retrieves the boundaries of the @self.

The node will not draw outside of its boundaries.

Returns
bounds

return location for the boundaries

source

pub fn node_type(&self) -> RenderNodeType

Returns the type of the @self.

Returns

the type of the RenderNode

source

pub fn serialize(&self) -> Bytes

Serializes the @self for later deserialization via gsk_render_node_deserialize(). No guarantees are made about the format used other than that the same version of GTK will be able to deserialize the result of a call to gsk_render_node_serialize() and gsk_render_node_deserialize() will correctly reject files it cannot open that were created with previous versions of GTK.

The intended use of this functions is testing, benchmarking and debugging. The format is not meant as a permanent storage format.

Returns

a GBytes representing the node.

source

pub fn write_to_file(&self, filename: impl AsRef<Path>) -> Result<(), Error>

This function is equivalent to calling serialize() followed by file_set_contents().

See those two functions for details on the arguments.

It is mostly intended for use inside a debugger to quickly dump a render node to a file for later inspection.

filename

the file to save it to.

Returns

true if saving was successful

source

pub fn is<T: IsRenderNode>(&self) -> bool

source

pub fn type_(&self) -> Type

source

pub fn downcast_ref<T: IsRenderNode>(&self) -> Option<&T>

Trait Implementations§

source§

impl AsRef<RenderNode> for ConicGradientNode

source§

fn as_ref(&self) -> &RenderNode

Converts this type into a shared reference of the (usually inferred) input type.
source§

impl Clone for ConicGradientNode

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for ConicGradientNode

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Deref for ConicGradientNode

§

type Target = RenderNode

The resulting type after dereferencing.
source§

fn deref(&self) -> &Self::Target

Dereferences the value.
source§

impl Display for ConicGradientNode

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<'a> FromValue<'a> for ConicGradientNode

Available on crate feature v4_6 only.
§

type Checker = GenericValueTypeOrNoneChecker<ConicGradientNode>

Value type checker.
source§

unsafe fn from_value(value: &'a Value) -> Self

Get the contained value from a Value. Read more
source§

impl IsRenderNode for ConicGradientNode

source§

const NODE_TYPE: RenderNodeType = RenderNodeType::ConicGradientNode

source§

fn upcast(self) -> RenderNode

source§

fn upcast_ref(&self) -> &RenderNode

source§

impl StaticType for ConicGradientNode

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl ToValue for ConicGradientNode

Available on crate feature v4_6 only.
source§

fn to_value(&self) -> Value

Convert a value to a Value.
source§

fn value_type(&self) -> Type

Returns the type identifer of self. Read more
source§

impl ToValueOptional for ConicGradientNode

Available on crate feature v4_6 only.
source§

fn to_value_optional(s: Option<&Self>) -> Value

Convert an Option to a Value.
source§

impl ValueType for ConicGradientNode

Available on crate feature v4_6 only.
§

type Type = ConicGradientNode

Type to get the Type from. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> StaticTypeExt for Twhere T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToClosureReturnValue for Twhere T: ToValue,

source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for Twhere T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<'a, T, C> FromValueOptional<'a> for Twhere T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError>,