pub struct InscriptionBuilder { /* private fields */ }
Available on crate feature v4_8 only.
Expand description

A builder-pattern type to construct Inscription objects.

Implementations§

source§

impl InscriptionBuilder

source

pub fn attributes(self, attributes: &AttrList) -> Self

A list of style attributes to apply to the text of the inscription.

source

pub fn markup(self, markup: impl Into<GString>) -> Self

Utility property that sets both the text and attributes properties, mainly intended for use in GtkBuilder ui files to ease translation support and bindings.

This function uses parse_markup() to parse the markup into text and attributes. The markup must be valid. If you cannot ensure that, consider using parse_markup() and setting the two properties yourself.

source

pub fn min_chars(self, min_chars: u32) -> Self

The number of characters that should fit into the inscription at minimum.

This influences the requested width, not the width actually given to the widget, which might turn out to be larger.

Note that this is an approximate character width, so some characters might be wider and some might be thinner, so do not expect the number of characters to exactly match.

If you set this property to 0, the inscription will not request any width at all and its width will be determined entirely by its surroundings.

source

pub fn min_lines(self, min_lines: u32) -> Self

The number of lines that should fit into the inscription at minimum.

This influences the requested height, not the height actually given to the widget, which might turn out to be larger.

Note that this is an approximate line height, so if the text uses things like fancy Unicode or attribute that influence the height, the text might not fit.

If you set this property to 0, the inscription will not request any height at all and its height will be determined entirely by its surroundings.

source

pub fn nat_chars(self, nat_chars: u32) -> Self

The number of characters that should ideally fit into the inscription.

This influences the requested width, not the width actually given to the widget. The widget might turn out larger as well as smaller.

If this property is set to a value smaller than min-chars, that value will be used. In particular, for the default value of 0, this will always be the case.

source

pub fn nat_lines(self, nat_lines: u32) -> Self

The number of lines that should ideally fit into the inscription.

This influences the requested height, not the height actually given to the widget. The widget might turn out larger as well as smaller.

If this property is set to a value smaller than min-lines, that value will be used. In particular, for the default value of 0, this will always be the case.

source

pub fn text(self, text: impl Into<GString>) -> Self

The displayed text.

source

pub fn text_overflow(self, text_overflow: InscriptionOverflow) -> Self

The overflow method to use for the text.

source

pub fn wrap_mode(self, wrap_mode: WrapMode) -> Self

Controls how the line wrapping is done.

Note that unlike Label, the default here is pango::WrapMode::WordChar.

source

pub fn xalign(self, xalign: f32) -> Self

The horizontal alignment of the text inside the allocated size.

Compare this to halign, which determines how the inscription’s size allocation is positioned in the available space.

source

pub fn yalign(self, yalign: f32) -> Self

The vertical alignment of the text inside the allocated size.

Compare this to valign, which determines how the inscription’s size allocation is positioned in the available space.

source

pub fn can_focus(self, can_focus: bool) -> Self

Whether the widget or any of its descendents can accept the input focus.

This property is meant to be set by widget implementations, typically in their instance init function.

source

pub fn can_target(self, can_target: bool) -> Self

Whether the widget can receive pointer events.

source

pub fn css_classes(self, css_classes: impl Into<StrV>) -> Self

A list of css classes applied to this widget.

source

pub fn css_name(self, css_name: impl Into<GString>) -> Self

The name of this widget in the CSS tree.

This property is meant to be set by widget implementations, typically in their instance init function.

source

pub fn cursor(self, cursor: &Cursor) -> Self

The cursor used by @widget.

source

pub fn focus_on_click(self, focus_on_click: bool) -> Self

Whether the widget should grab focus when it is clicked with the mouse.

This property is only relevant for widgets that can take focus.

source

pub fn focusable(self, focusable: bool) -> Self

Whether this widget itself will accept the input focus.

source

pub fn halign(self, halign: Align) -> Self

How to distribute horizontal space if widget gets extra space.

source

pub fn has_tooltip(self, has_tooltip: bool) -> Self

Enables or disables the emission of the ::query-tooltip signal on @widget.

A value of true indicates that @widget can have a tooltip, in this case the widget will be queried using query-tooltip to determine whether it will provide a tooltip or not.

source

pub fn height_request(self, height_request: i32) -> Self

Override for height request of the widget.

If this is -1, the natural request will be used.

source

pub fn hexpand(self, hexpand: bool) -> Self

Whether to expand horizontally.

source

pub fn hexpand_set(self, hexpand_set: bool) -> Self

Whether to use the hexpand property.

source

pub fn layout_manager(self, layout_manager: &impl IsA<LayoutManager>) -> Self

The LayoutManager instance to use to compute the preferred size of the widget, and allocate its children.

This property is meant to be set by widget implementations, typically in their instance init function.

source

pub fn margin_bottom(self, margin_bottom: i32) -> Self

Margin on bottom side of widget.

This property adds margin outside of the widget’s normal size request, the margin will be added in addition to the size from WidgetExt::set_size_request() for example.

source

pub fn margin_end(self, margin_end: i32) -> Self

Margin on end of widget, horizontally.

This property supports left-to-right and right-to-left text directions.

This property adds margin outside of the widget’s normal size request, the margin will be added in addition to the size from WidgetExt::set_size_request() for example.

source

pub fn margin_start(self, margin_start: i32) -> Self

Margin on start of widget, horizontally.

This property supports left-to-right and right-to-left text directions.

This property adds margin outside of the widget’s normal size request, the margin will be added in addition to the size from WidgetExt::set_size_request() for example.

source

pub fn margin_top(self, margin_top: i32) -> Self

Margin on top side of widget.

This property adds margin outside of the widget’s normal size request, the margin will be added in addition to the size from WidgetExt::set_size_request() for example.

source

pub fn name(self, name: impl Into<GString>) -> Self

The name of the widget.

source

pub fn opacity(self, opacity: f64) -> Self

The requested opacity of the widget.

source

pub fn overflow(self, overflow: Overflow) -> Self

How content outside the widget’s content area is treated.

This property is meant to be set by widget implementations, typically in their instance init function.

source

pub fn receives_default(self, receives_default: bool) -> Self

Whether the widget will receive the default action when it is focused.

source

pub fn sensitive(self, sensitive: bool) -> Self

Whether the widget responds to input.

source

pub fn tooltip_markup(self, tooltip_markup: impl Into<GString>) -> Self

Sets the text of tooltip to be the given string, which is marked up with Pango markup.

Also see Tooltip::set_markup().

This is a convenience property which will take care of getting the tooltip shown if the given string is not None: has-tooltip will automatically be set to true and there will be taken care of query-tooltip in the default signal handler.

Note that if both tooltip-text and tooltip-markup are set, the last one wins.

source

pub fn tooltip_text(self, tooltip_text: impl Into<GString>) -> Self

Sets the text of tooltip to be the given string.

Also see Tooltip::set_text().

This is a convenience property which will take care of getting the tooltip shown if the given string is not None: has-tooltip will automatically be set to true and there will be taken care of query-tooltip in the default signal handler.

Note that if both tooltip-text and tooltip-markup are set, the last one wins.

source

pub fn valign(self, valign: Align) -> Self

How to distribute vertical space if widget gets extra space.

source

pub fn vexpand(self, vexpand: bool) -> Self

Whether to expand vertically.

source

pub fn vexpand_set(self, vexpand_set: bool) -> Self

Whether to use the vexpand property.

source

pub fn visible(self, visible: bool) -> Self

Whether the widget is visible.

source

pub fn width_request(self, width_request: i32) -> Self

Override for width request of the widget.

If this is -1, the natural request will be used.

source

pub fn accessible_role(self, accessible_role: AccessibleRole) -> Self

The accessible role of the given Accessible implementation.

The accessible role cannot be changed once set.

source

pub fn build(self) -> Inscription

Build the Inscription.

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.