Enum gtk4::InputPurpose

source ·
#[non_exhaustive]
pub enum InputPurpose { FreeForm, Alpha, Digits, Number, Phone, Url, Email, Name, Password, Pin, Terminal, }
Expand description

Describes primary purpose of the input widget.

This information is useful for on-screen keyboards and similar input methods to decide which keys should be presented to the user.

Note that the purpose is not meant to impose a totally strict rule about allowed characters, and does not replace input validation. It is fine for an on-screen keyboard to let the user override the character set restriction that is expressed by the purpose. The application is expected to validate the entry contents, even if it specified a purpose.

The difference between Digits and Number is that the former accepts only digits while the latter also some punctuation (like commas or points, plus, minus) and “e” or “E” as in 3.14E+000.

This enumeration may be extended in the future; input methods should interpret unknown values as “free form”.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

FreeForm

Allow any character

§

Alpha

Allow only alphabetic characters

§

Digits

Allow only digits

§

Number

Edited field expects numbers

§

Phone

Edited field expects phone number

§

Url

Edited field expects URL

§

Email

Edited field expects email address

§

Name

Edited field expects the name of a person

§

Password

Like FreeForm, but characters are hidden

§

Pin

Like Digits, but characters are hidden

§

Terminal

Allow any character, in addition to control codes

Trait Implementations§

source§

impl Clone for InputPurpose

source§

fn clone(&self) -> InputPurpose

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for InputPurpose

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Display for InputPurpose

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl From<InputPurpose> for Value

source§

fn from(v: InputPurpose) -> Self

Converts to this type from the input type.
source§

impl<'a> FromValue<'a> for InputPurpose

§

type Checker = GenericValueTypeChecker<InputPurpose>

Value type checker.
source§

unsafe fn from_value(value: &'a Value) -> Self

Get the contained value from a Value. Read more
source§

impl HasParamSpec for InputPurpose

§

type ParamSpec = ParamSpecEnum

§

type SetValue = InputPurpose

Preferred value to be used as setter for the associated ParamSpec.
§

type BuilderFn = fn(_: &str, _: InputPurpose) -> ParamSpecEnumBuilder<'_, InputPurpose>

source§

fn param_spec_builder() -> Self::BuilderFn

source§

impl Hash for InputPurpose

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for InputPurpose

source§

fn cmp(&self, other: &InputPurpose) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl PartialEq<InputPurpose> for InputPurpose

source§

fn eq(&self, other: &InputPurpose) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd<InputPurpose> for InputPurpose

source§

fn partial_cmp(&self, other: &InputPurpose) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for InputPurpose

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl ToValue for InputPurpose

source§

fn to_value(&self) -> Value

Convert a value to a Value.
source§

fn value_type(&self) -> Type

Returns the type identifer of self. Read more
source§

impl ValueType for InputPurpose

§

type Type = InputPurpose

Type to get the Type from. Read more
source§

impl Copy for InputPurpose

source§

impl Eq for InputPurpose

source§

impl StructuralEq for InputPurpose

source§

impl StructuralPartialEq for InputPurpose

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoClosureReturnValue for Twhere T: Into<Value>,

source§

impl<T> Property for Twhere T: HasParamSpec,

§

type Value = T

source§

impl<T> PropertyGet for Twhere T: HasParamSpec,

§

type Value = T

source§

fn get<R, F>(&self, f: F) -> Rwhere F: Fn(&<T as PropertyGet>::Value) -> R,

source§

impl<T> StaticTypeExt for Twhere T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToSendValue for Twhere T: Send + ToValue + ?Sized,

source§

fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for Twhere T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.