Struct gio::ListModel[−][src]

pub struct ListModel(_);

Expand description

ListModel is an interface that represents a mutable list of GObjects. Its main intention is as a model for various widgets in user interfaces, such as list views, but it can also be used as a convenient method of returning lists of data, with support for updates.

Each object in the list may also report changes in itself via some mechanism (normally the signal::glib::Object::notify signal). Taken together with the signal::ListModel::items-changed signal, this provides for a list that can change its membership, and in which the members can change their individual properties.

A good example would be the list of visible wireless network access points, where each access point can report dynamic properties such as signal strength.

It is important to note that the ListModel itself does not report changes to the individual items. It only reports changes to the list membership. If you want to observe changes to the objects themselves then you need to connect signals to the objects that you are interested in.

All items in a ListModel are of (or derived from) the same type. ListModelExt::item_type() returns that type. The type may be an interface, in which case all objects in the list must implement it.

The semantics are close to that of an array: ListModelExt::n_items() returns the number of items in the list and g_list_model_get_item() returns an item at a (0-based) position. In order to allow implementations to calculate the list length lazily, you can also iterate over items: starting from 0, repeatedly call g_list_model_get_item() until it returns None.

An implementation may create objects lazily, but must take care to return the same object for a given position until all references to it are gone.

On the other side, a consumer is expected only to hold references on objects that are currently “user visible”, in order to facilitate the maximum level of laziness in the implementation of the list and to reduce the required number of signal connections at a given time.

This interface is intended only to be used from a single thread. The thread in which it is appropriate to use it depends on the particular implementation, but typically it will be from the thread that owns the [thread-default main context][g-main-context-push-thread-default] in effect at the time that the model was created.

Implements

Trait Implementations

impl Clone for ListModel

fn clone(&self) -> ListModel

Returns a copy of the value. Read more

1.0.0[src]

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for ListModel

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Display for ListModel

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Hash for ListModel

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more

1.3.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher,

Feeds a slice of this type into the given Hasher. Read more

impl<T: ListModelImpl> IsImplementable<T> for ListModel where
    <T as ObjectSubclass>::Type: IsA<Object>,

fn interface_init(iface: &mut Interface<Self>)

Override the virtual methods of this interface for the given subclass and do other interface initialization. Read more

fn instance_init(_instance: &mut InitializingObject<T>)

Instance specific initialization. Read more

impl Ord for ListModel

fn cmp(&self, other: &ListModel) -> Ordering

This method returns an Ordering between self and other. Read more

1.21.0[src]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values. Read more

1.21.0[src]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values. Read more

1.50.0[src]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval. Read more

impl<T: ObjectType> PartialEq<T> for ListModel

fn eq(&self, other: &T) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0[src]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: ObjectType> PartialOrd<T> for ListModel

fn partial_cmp(&self, other: &T) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more

1.0.0[src]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0[src]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0[src]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0[src]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl StaticType for ListModel

fn static_type() -> Type

Returns the type identifier of Self.

impl Eq for ListModel

impl IsA<ListModel> for ListStore

impl StructuralEq for ListModel

Auto Trait Implementations

impl RefUnwindSafe for ListModel

impl !Send for ListModel

impl !Sync for ListModel

impl Unpin for ListModel

impl UnwindSafe for ListModel

Blanket Implementations

impl<T> Any for T where
    T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T where
    T: ?Sized,

pub fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T where
    T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> Cast for T where
    T: ObjectType,

fn upcast<T>(self) -> T where
    Self: IsA<T>,
    T: ObjectType,

Upcasts an object to a superclass or interface T. Read more

fn upcast_ref<T>(&self) -> &T where
    Self: IsA<T>,
    T: ObjectType,

Upcasts an object to a reference of its superclass or interface T. Read more

fn downcast<T>(self) -> Result<T, Self> where
    Self: CanDowncast<T>,
    T: ObjectType,

Tries to downcast to a subclass or interface implementor T. Read more

fn downcast_ref<T>(&self) -> Option<&T> where
    Self: CanDowncast<T>,
    T: ObjectType,

Tries to downcast to a reference of its subclass or interface implementor T. Read more

fn dynamic_cast<T>(self) -> Result<T, Self> where
    T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more

fn dynamic_cast_ref<T>(&self) -> Option<&T> where
    T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more

unsafe fn unsafe_cast<T>(self) -> T where
    T: ObjectType,

Casts to T unconditionally. Read more

unsafe fn unsafe_cast_ref<T>(&self) -> &T where
    T: ObjectType,

Casts to &T unconditionally. Read more

impl<T> From<T> for T

pub fn from(t: T) -> T

Performs the conversion.

impl<T, U> Into<U> for T where
    U: From<T>,

pub fn into(self) -> U

Performs the conversion.

impl<T> ObjectExt for T where
    T: ObjectType,

pub fn is<U>(&self) -> bool where
    U: StaticType,

Returns true if the object is an instance of (can be cast to) T.

pub fn type_(&self) -> Type

pub fn object_class(&self) -> &Class<Object>

pub fn class(&self) -> &Class<T> where
    T: IsClass,

pub fn class_of<U>(&self) -> Option<&Class<U>> where
    U: IsClass,

pub fn interface<U>(&self) -> Option<InterfaceRef<'_, U>> where
    U: IsInterface,

pub fn set_properties(
    &self, 
    property_values: &[(&str, &dyn ToValue)]
) -> Result<(), BoolError>

pub fn set_properties_from_value(
    &self, 
    property_values: &[(&str, Value)]
) -> Result<(), BoolError>

pub fn set_property<'a, N, V>(
    &self, 
    property_name: N, 
    value: V
) -> Result<(), BoolError> where
    V: ToValue,
    N: Into<&'a str>,

pub fn set_property_from_value<'a, N>(
    &self, 
    property_name: N, 
    value: &Value
) -> Result<(), BoolError> where
    N: Into<&'a str>,

pub fn property<'a, N>(&self, property_name: N) -> Result<Value, BoolError> where
    N: Into<&'a str>,

pub unsafe fn set_qdata<QD>(&self, key: Quark, value: QD) where
    QD: 'static,

Safety Read more

pub unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>> where
    QD: 'static,

Safety Read more

pub unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD> where
    QD: 'static,

Safety Read more

pub unsafe fn set_data<QD>(&self, key: &str, value: QD) where
    QD: 'static,

Safety Read more

pub unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>> where
    QD: 'static,

Safety Read more

pub unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD> where
    QD: 'static,

Safety Read more

pub fn block_signal(&self, handler_id: &SignalHandlerId)

pub fn unblock_signal(&self, handler_id: &SignalHandlerId)

pub fn stop_signal_emission(&self, signal_name: &str)

pub fn disconnect(&self, handler_id: SignalHandlerId)

pub fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId where
    F: 'static + Fn(&T, &ParamSpec) + Send + Sync,

pub fn connect_notify_local<F>(
    &self, 
    name: Option<&str>, 
    f: F
) -> SignalHandlerId where
    F: 'static + Fn(&T, &ParamSpec),

pub unsafe fn connect_notify_unsafe<F>(
    &self, 
    name: Option<&str>, 
    f: F
) -> SignalHandlerId where
    F: Fn(&T, &ParamSpec),

pub fn notify<'a, N>(&self, property_name: N) where
    N: Into<&'a str>,

pub fn notify_by_pspec(&self, pspec: &ParamSpec)

pub fn has_property<'a, N>(&self, property_name: N, type_: Option<Type>) -> bool where
    N: Into<&'a str>,

pub fn property_type<'a, N>(&self, property_name: N) -> Option<Type> where
    N: Into<&'a str>,

pub fn find_property<'a, N>(&self, property_name: N) -> Option<ParamSpec> where
    N: Into<&'a str>,

pub fn list_properties(&self) -> Vec<ParamSpec, Global>

pub fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

pub fn connect<'a, N, F>(
    &self, 
    signal_name: N, 
    after: bool, 
    callback: F
) -> Result<SignalHandlerId, BoolError> where
    F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,
    N: Into<&'a str>,

pub fn connect_id<F>(
    &self, 
    signal_id: SignalId, 
    details: Option<Quark>, 
    after: bool, 
    callback: F
) -> Result<SignalHandlerId, BoolError> where
    F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Same as connect but takes a SignalId instead of a signal name.

pub fn connect_local<'a, N, F>(
    &self, 
    signal_name: N, 
    after: bool, 
    callback: F
) -> Result<SignalHandlerId, BoolError> where
    F: Fn(&[Value]) -> Option<Value> + 'static,
    N: Into<&'a str>,

pub fn connect_local_id<F>(
    &self, 
    signal_id: SignalId, 
    details: Option<Quark>, 
    after: bool, 
    callback: F
) -> Result<SignalHandlerId, BoolError> where
    F: Fn(&[Value]) -> Option<Value> + 'static,

Same as connect_local but takes a SignalId instead of a signal name.

pub unsafe fn connect_unsafe<'a, N, F>(
    &self, 
    signal_name: N, 
    after: bool, 
    callback: F
) -> Result<SignalHandlerId, BoolError> where
    F: Fn(&[Value]) -> Option<Value>,
    N: Into<&'a str>,

pub unsafe fn connect_unsafe_id<F>(
    &self, 
    signal_id: SignalId, 
    details: Option<Quark>, 
    after: bool, 
    callback: F
) -> Result<SignalHandlerId, BoolError> where
    F: Fn(&[Value]) -> Option<Value>,

Same as connect_unsafe but takes a SignalId instead of a signal name.

pub fn emit(
    &self, 
    signal_id: SignalId, 
    args: &[&dyn ToValue]
) -> Result<Option<Value>, BoolError>

Emit signal by signal id.

pub fn emit_with_details(
    &self, 
    signal_id: SignalId, 
    details: Quark, 
    args: &[&dyn ToValue]
) -> Result<Option<Value>, BoolError>

Emit signal with details by signal id.

pub fn emit_by_name<'a, N>(
    &self, 
    signal_name: N, 
    args: &[&dyn ToValue]
) -> Result<Option<Value>, BoolError> where
    N: Into<&'a str>,

Emit signal by it’s name.

pub fn downgrade(&self) -> WeakRef<T>

pub fn bind_property<'a, O, N, M>(
    &'a self, 
    source_property: N, 
    target: &'a O, 
    target_property: M
) -> BindingBuilder<'a> where
    O: ObjectType,
    N: Into<&'a str>,
    M: Into<&'a str>,

pub fn ref_count(&self) -> u32

pub fn emit_with_values(
    &self, 
    signal_id: SignalId, 
    args: &[Value]
) -> Result<Option<Value>, BoolError>

Same as emit but takes Value for the arguments.

pub fn emit_by_name_with_values<'a, N>(
    &self, 
    signal_name: N, 
    args: &[Value]
) -> Result<Option<Value>, BoolError> where
    N: Into<&'a str>,

Same as emit_by_name but takes Value for the arguments.

pub fn emit_with_details_and_values(
    &self, 
    signal_id: SignalId, 
    details: Quark, 
    args: &[Value]
) -> Result<Option<Value>, BoolError>

Same as emit_with_details but takes Value for the arguments.

impl<T> ToOwned for T where
    T: Clone,

type Owned = T

The resulting type after obtaining ownership.

pub fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

pub fn clone_into(&self, target: &mut T)

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T> ToSendValue for T where
    T: Send + ToValue + ?Sized,

pub fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.

impl<T> ToString for T where
    T: Display + ?Sized,

pub default fn to_string(&self) -> String

Converts the given value to a String. Read more

impl<T, U> TryFrom<U> for T where
    U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<Super, Sub> CanDowncast<Sub> for Super where
    Sub: IsA<Super>,
    Super: IsA<Super>,

impl<'a, T, C> FromValueOptional<'a> for T where
    C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError>,
    T: FromValue<'a, Checker = C>,