pub trait TlsConnectionExt: 'static {
Show 34 methods // Required methods fn emit_accept_certificate( &self, peer_cert: &impl IsA<TlsCertificate>, errors: TlsCertificateFlags ) -> bool; fn certificate(&self) -> Option<TlsCertificate>; fn ciphersuite_name(&self) -> Option<GString>; fn database(&self) -> Option<TlsDatabase>; fn interaction(&self) -> Option<TlsInteraction>; fn negotiated_protocol(&self) -> Option<GString>; fn peer_certificate(&self) -> Option<TlsCertificate>; fn peer_certificate_errors(&self) -> TlsCertificateFlags; fn protocol_version(&self) -> TlsProtocolVersion; fn rehandshake_mode(&self) -> TlsRehandshakeMode; fn requires_close_notify(&self) -> bool; fn handshake( &self, cancellable: Option<&impl IsA<Cancellable>> ) -> Result<(), Error>; fn handshake_async<P: FnOnce(Result<(), Error>) + 'static>( &self, io_priority: Priority, cancellable: Option<&impl IsA<Cancellable>>, callback: P ); fn handshake_future( &self, io_priority: Priority ) -> Pin<Box_<dyn Future<Output = Result<(), Error>> + 'static>>; fn set_advertised_protocols(&self, protocols: &[&str]); fn set_certificate(&self, certificate: &impl IsA<TlsCertificate>); fn set_database(&self, database: Option<&impl IsA<TlsDatabase>>); fn set_interaction(&self, interaction: Option<&impl IsA<TlsInteraction>>); fn set_rehandshake_mode(&self, mode: TlsRehandshakeMode); fn set_require_close_notify(&self, require_close_notify: bool); fn advertised_protocols(&self) -> Vec<GString>; fn base_io_stream(&self) -> Option<IOStream>; fn connect_accept_certificate<F: Fn(&Self, &TlsCertificate, TlsCertificateFlags) -> bool + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_advertised_protocols_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_certificate_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_ciphersuite_name_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_database_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_interaction_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_negotiated_protocol_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_peer_certificate_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_peer_certificate_errors_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_protocol_version_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_rehandshake_mode_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId; fn connect_require_close_notify_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId;
}
Expand description

Required Methods§

source

fn emit_accept_certificate( &self, peer_cert: &impl IsA<TlsCertificate>, errors: TlsCertificateFlags ) -> bool

Used by TlsConnection implementations to emit the signal::TlsConnection::accept-certificate signal.

peer_cert

the peer’s TlsCertificate

errors

the problems with peer_cert

Returns

true if one of the signal handlers has returned true to accept peer_cert

source

fn certificate(&self) -> Option<TlsCertificate>

Gets self’s certificate, as set by set_certificate().

Returns

self’s certificate, or None

source

fn ciphersuite_name(&self) -> Option<GString>

Available on crate feature v2_70 only.

Returns the name of the current TLS ciphersuite, or None if the connection has not handshaked or has been closed. Beware that the TLS backend may use any of multiple different naming conventions, because OpenSSL and GnuTLS have their own ciphersuite naming conventions that are different from each other and different from the standard, IANA- registered ciphersuite names. The ciphersuite name is intended to be displayed to the user for informative purposes only, and parsing it is not recommended.

Returns

The name of the current TLS ciphersuite, or None

source

fn database(&self) -> Option<TlsDatabase>

Gets the certificate database that self uses to verify peer certificates. See set_database().

Returns

the certificate database that self uses or None

source

fn interaction(&self) -> Option<TlsInteraction>

Get the object that will be used to interact with the user. It will be used for things like prompting the user for passwords. If None is returned, then no user interaction will occur for this connection.

Returns

The interaction object.

source

fn negotiated_protocol(&self) -> Option<GString>

Available on crate feature v2_60 only.

Gets the name of the application-layer protocol negotiated during the handshake.

If the peer did not use the ALPN extension, or did not advertise a protocol that matched one of self’s protocols, or the TLS backend does not support ALPN, then this will be None. See set_advertised_protocols().

Returns

the negotiated protocol, or None

source

fn peer_certificate(&self) -> Option<TlsCertificate>

Gets self’s peer’s certificate after the handshake has completed or failed. (It is not set during the emission of signal::TlsConnection::accept-certificate.)

Returns

self’s peer’s certificate, or None

source

fn peer_certificate_errors(&self) -> TlsCertificateFlags

Gets the errors associated with validating self’s peer’s certificate, after the handshake has completed or failed. (It is not set during the emission of signal::TlsConnection::accept-certificate.)

See property::TlsConnection::peer-certificate-errors for more information.

Returns

self’s peer’s certificate errors

source

fn protocol_version(&self) -> TlsProtocolVersion

Available on crate feature v2_70 only.

Returns the current TLS protocol version, which may be TlsProtocolVersion::Unknown if the connection has not handshaked, or has been closed, or if the TLS backend has implemented a protocol version that is not a recognized TlsProtocolVersion.

Returns

The current TLS protocol version

source

fn rehandshake_mode(&self) -> TlsRehandshakeMode

Gets self rehandshaking mode. See set_rehandshake_mode() for details.

Deprecated since 2.60

Changing the rehandshake mode is no longer required for compatibility. Also, rehandshaking has been removed from the TLS protocol in TLS 1.3.

Returns

TlsRehandshakeMode::Safely

source

fn requires_close_notify(&self) -> bool

Tests whether or not self expects a proper TLS close notification when the connection is closed. See set_require_close_notify() for details.

Returns

true if self requires a proper TLS close notification.

source

fn handshake( &self, cancellable: Option<&impl IsA<Cancellable>> ) -> Result<(), Error>

Attempts a TLS handshake on self.

On the client side, it is never necessary to call this method; although the connection needs to perform a handshake after connecting (or after sending a “STARTTLS”-type command), TlsConnection will handle this for you automatically when you try to send or receive data on the connection. You can call handshake() manually if you want to know whether the initial handshake succeeded or failed (as opposed to just immediately trying to use self to read or write, in which case, if it fails, it may not be possible to tell if it failed before or after completing the handshake), but beware that servers may reject client authentication after the handshake has completed, so a successful handshake does not indicate the connection will be usable.

Likewise, on the server side, although a handshake is necessary at the beginning of the communication, you do not need to call this function explicitly unless you want clearer error reporting.

Previously, calling handshake() after the initial handshake would trigger a rehandshake; however, this usage was deprecated in GLib 2.60 because rehandshaking was removed from the TLS protocol in TLS 1.3. Since GLib 2.64, calling this function after the initial handshake will no longer do anything.

When using a TlsConnection created by SocketClient, the SocketClient performs the initial handshake, so calling this function manually is not recommended.

signal::TlsConnection::accept_certificate may be emitted during the handshake.

cancellable

a Cancellable, or None

Returns

success or failure

source

fn handshake_async<P: FnOnce(Result<(), Error>) + 'static>( &self, io_priority: Priority, cancellable: Option<&impl IsA<Cancellable>>, callback: P )

Asynchronously performs a TLS handshake on self. See handshake() for more information.

io_priority

the [I/O priority][io-priority] of the request

cancellable

a Cancellable, or None

callback

callback to call when the handshake is complete

source

fn handshake_future( &self, io_priority: Priority ) -> Pin<Box_<dyn Future<Output = Result<(), Error>> + 'static>>

source

fn set_advertised_protocols(&self, protocols: &[&str])

Available on crate feature v2_60 only.

Sets the list of application-layer protocols to advertise that the caller is willing to speak on this connection. The Application-Layer Protocol Negotiation (ALPN) extension will be used to negotiate a compatible protocol with the peer; use negotiated_protocol() to find the negotiated protocol after the handshake. Specifying None for the the value of protocols will disable ALPN negotiation.

See IANA TLS ALPN Protocol IDs for a list of registered protocol IDs.

protocols

a None-terminated array of ALPN protocol names (eg, “http/1.1”, “h2”), or None

source

fn set_certificate(&self, certificate: &impl IsA<TlsCertificate>)

This sets the certificate that self will present to its peer during the TLS handshake. For a TlsServerConnection, it is mandatory to set this, and that will normally be done at construct time.

For a TlsClientConnection, this is optional. If a handshake fails with TlsError::CertificateRequired, that means that the server requires a certificate, and if you try connecting again, you should call this method first. You can call TlsClientConnectionExt::accepted_cas() on the failed connection to get a list of Certificate Authorities that the server will accept certificates from.

(It is also possible that a server will allow the connection with or without a certificate; in that case, if you don’t provide a certificate, you can tell that the server requested one by the fact that TlsClientConnectionExt::accepted_cas() will return non-None.)

certificate

the certificate to use for self

source

fn set_database(&self, database: Option<&impl IsA<TlsDatabase>>)

Sets the certificate database that is used to verify peer certificates. This is set to the default database by default. See TlsBackendExt::default_database(). If set to None, then peer certificate validation will always set the TlsCertificateFlags::UNKNOWN_CA error (meaning signal::TlsConnection::accept-certificate will always be emitted on client-side connections, unless that bit is not set in property::TlsClientConnection::validation-flags).

There are nonintuitive security implications when using a non-default database. See GDtlsConnection:database for details.

database

a TlsDatabase

source

fn set_interaction(&self, interaction: Option<&impl IsA<TlsInteraction>>)

Set the object that will be used to interact with the user. It will be used for things like prompting the user for passwords.

The interaction argument will normally be a derived subclass of TlsInteraction. None can also be provided if no user interaction should occur for this connection.

interaction

an interaction object, or None

source

fn set_rehandshake_mode(&self, mode: TlsRehandshakeMode)

Since GLib 2.64, changing the rehandshake mode is no longer supported and will have no effect. With TLS 1.3, rehandshaking has been removed from the TLS protocol, replaced by separate post-handshake authentication and rekey operations.

Deprecated since 2.60

Changing the rehandshake mode is no longer required for compatibility. Also, rehandshaking has been removed from the TLS protocol in TLS 1.3.

mode

the rehandshaking mode

source

fn set_require_close_notify(&self, require_close_notify: bool)

Sets whether or not self expects a proper TLS close notification before the connection is closed. If this is true (the default), then self will expect to receive a TLS close notification from its peer before the connection is closed, and will return a TlsError::Eof error if the connection is closed without proper notification (since this may indicate a network error, or man-in-the-middle attack).

In some protocols, the application will know whether or not the connection was closed cleanly based on application-level data (because the application-level data includes a length field, or is somehow self-delimiting); in this case, the close notify is redundant and sometimes omitted. (TLS 1.1 explicitly allows this; in TLS 1.0 it is technically an error, but often done anyway.) You can use set_require_close_notify() to tell self to allow an “unannounced” connection close, in which case the close will show up as a 0-length read, as in a non-TLS SocketConnection, and it is up to the application to check that the data has been fully received.

Note that this only affects the behavior when the peer closes the connection; when the application calls IOStreamExt::close() itself on self, this will send a close notification regardless of the setting of this property. If you explicitly want to do an unclean close, you can close self’s property::TlsConnection::base-io-stream rather than closing self itself, but note that this may only be done when no other operations are pending on self or the base I/O stream.

require_close_notify

whether or not to require close notification

source

fn advertised_protocols(&self) -> Vec<GString>

Available on crate feature v2_60 only.

The list of application-layer protocols that the connection advertises that it is willing to speak. See set_advertised_protocols().

source

fn base_io_stream(&self) -> Option<IOStream>

The IOStream that the connection wraps. The connection holds a reference to this stream, and may run operations on the stream from other threads throughout its lifetime. Consequently, after the IOStream has been constructed, application code may only run its own operations on this stream when no IOStream operations are running.

source

fn connect_accept_certificate<F: Fn(&Self, &TlsCertificate, TlsCertificateFlags) -> bool + 'static>( &self, f: F ) -> SignalHandlerId

Emitted during the TLS handshake after the peer certificate has been received. You can examine peer_cert’s certification path by calling TlsCertificateExt::issuer() on it.

For a client-side connection, peer_cert is the server’s certificate, and the signal will only be emitted if the certificate was not acceptable according to conn’s property::TlsClientConnection::validation_flags. If you would like the certificate to be accepted despite errors, return true from the signal handler. Otherwise, if no handler accepts the certificate, the handshake will fail with TlsError::BadCertificate.

GLib guarantees that if certificate verification fails, this signal will be emitted with at least one error will be set in errors, but it does not guarantee that all possible errors will be set. Accordingly, you may not safely decide to ignore any particular type of error. For example, it would be incorrect to ignore TlsCertificateFlags::EXPIRED if you want to allow expired certificates, because this could potentially be the only error flag set even if other problems exist with the certificate.

For a server-side connection, peer_cert is the certificate presented by the client, if this was requested via the server’s property::TlsServerConnection::authentication_mode. On the server side, the signal is always emitted when the client presents a certificate, and the certificate will only be accepted if a handler returns true.

Note that if this signal is emitted as part of asynchronous I/O in the main thread, then you should not attempt to interact with the user before returning from the signal handler. If you want to let the user decide whether or not to accept the certificate, you would have to return false from the signal handler on the first attempt, and then after the connection attempt returns a TlsError::BadCertificate, you can interact with the user, and if the user decides to accept the certificate, remember that fact, create a new connection, and return true from the signal handler the next time.

If you are doing I/O in another thread, you do not need to worry about this, and can simply block in the signal handler until the UI thread returns an answer.

peer_cert

the peer’s TlsCertificate

errors

the problems with peer_cert.

Returns

true to accept peer_cert (which will also immediately end the signal emission). false to allow the signal emission to continue, which will cause the handshake to fail if no one else overrides it.

source

fn connect_advertised_protocols_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

Available on crate feature v2_60 only.
source

fn connect_certificate_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

source

fn connect_ciphersuite_name_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

Available on crate feature v2_70 only.
source

fn connect_database_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

source

fn connect_interaction_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

source

fn connect_negotiated_protocol_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

Available on crate feature v2_60 only.
source

fn connect_peer_certificate_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

source

fn connect_peer_certificate_errors_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

source

fn connect_protocol_version_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

Available on crate feature v2_70 only.
source

fn connect_rehandshake_mode_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

source

fn connect_require_close_notify_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

Implementors§