Trait glib::object::ObjectExt

source ·
pub trait ObjectExt: ObjectType {
Show 56 methods // Required methods fn is<T: StaticType>(&self) -> bool; fn type_(&self) -> Type; fn object_class(&self) -> &ObjectClass; fn class(&self) -> &Class<Self> where Self: IsClass; fn class_of<T: IsClass>(&self) -> Option<&Class<T>>; fn interface<T: IsInterface>(&self) -> Option<InterfaceRef<'_, T>>; fn set_property(&self, property_name: &str, value: impl Into<Value>); fn set_property_from_value(&self, property_name: &str, value: &Value); fn set_properties(&self, property_values: &[(&str, &dyn ToValue)]); fn set_properties_from_value(&self, property_values: &[(&str, Value)]); fn property<V: for<'b> FromValue<'b> + 'static>( &self, property_name: &str ) -> V; fn property_value(&self, property_name: &str) -> Value; fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool; fn property_type(&self, property_name: &str) -> Option<Type>; fn find_property(&self, property_name: &str) -> Option<ParamSpec>; fn list_properties(&self) -> PtrSlice<ParamSpec>; fn freeze_notify(&self) -> PropertyNotificationFreezeGuard; unsafe fn set_qdata<QD: 'static>(&self, key: Quark, value: QD); unsafe fn qdata<QD: 'static>(&self, key: Quark) -> Option<NonNull<QD>>; unsafe fn steal_qdata<QD: 'static>(&self, key: Quark) -> Option<QD>; unsafe fn set_data<QD: 'static>(&self, key: &str, value: QD); unsafe fn data<QD: 'static>(&self, key: &str) -> Option<NonNull<QD>>; unsafe fn steal_data<QD: 'static>(&self, key: &str) -> Option<QD>; fn block_signal(&self, handler_id: &SignalHandlerId); fn unblock_signal(&self, handler_id: &SignalHandlerId); fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>); fn stop_signal_emission_by_name(&self, signal_name: &str); fn connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static; fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static; fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId where F: Fn(&[Value]) -> Option<Value> + 'static; fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId where F: Fn(&[Value]) -> Option<Value> + 'static; unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId where F: Fn(&[Value]) -> Option<Value>; unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId where F: Fn(&[Value]) -> Option<Value>; fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> SignalHandlerId; fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> SignalHandlerId; fn watch_closure(&self, closure: &impl AsRef<Closure>); fn emit<R: TryFromClosureReturnValue>( &self, signal_id: SignalId, args: &[&dyn ToValue] ) -> R; fn emit_with_values( &self, signal_id: SignalId, args: &[Value] ) -> Option<Value>; fn emit_by_name<R: TryFromClosureReturnValue>( &self, signal_name: &str, args: &[&dyn ToValue] ) -> R; fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Option<Value>; fn emit_by_name_with_details<R: TryFromClosureReturnValue>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> R; fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Option<Value>; fn emit_with_details<R: TryFromClosureReturnValue>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> R; fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Option<Value>; fn disconnect(&self, handler_id: SignalHandlerId); fn connect_notify<F: Fn(&Self, &ParamSpec) + Send + Sync + 'static>( &self, name: Option<&str>, f: F ) -> SignalHandlerId; fn connect_notify_local<F: Fn(&Self, &ParamSpec) + 'static>( &self, name: Option<&str>, f: F ) -> SignalHandlerId; unsafe fn connect_notify_unsafe<F: Fn(&Self, &ParamSpec)>( &self, name: Option<&str>, f: F ) -> SignalHandlerId; fn notify(&self, property_name: &str); fn notify_by_pspec(&self, pspec: &ParamSpec); fn downgrade(&self) -> WeakRef<Self>; fn add_weak_ref_notify<F: FnOnce() + Send + 'static>( &self, f: F ) -> WeakRefNotify<Self>; fn add_weak_ref_notify_local<F: FnOnce() + 'static>( &self, f: F ) -> WeakRefNotify<Self>; fn bind_property<'a, 'f, 't, O: ObjectType>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str ) -> BindingBuilder<'a, 'f, 't>; fn ref_count(&self) -> u32; unsafe fn run_dispose(&self);
}

Required Methods§

source

fn is<T: StaticType>(&self) -> bool

Returns true if the object is an instance of (can be cast to) T.

source

fn type_(&self) -> Type

Returns the type of the object.

source

fn object_class(&self) -> &ObjectClass

Returns the ObjectClass of the object.

This is equivalent to calling obj.class().upcast_ref::<ObjectClass>().

source

fn class(&self) -> &Class<Self>where Self: IsClass,

Returns the class of the object.

source

fn class_of<T: IsClass>(&self) -> Option<&Class<T>>

Returns the class of the object in the given type T.

None is returned if the object is not a subclass of T.

source

fn interface<T: IsInterface>(&self) -> Option<InterfaceRef<'_, T>>

Returns the interface T of the object.

None is returned if the object does not implement the interface T.

source

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value.

Panics

If the property does not exist, if the type of the property is different than the provided value, or if the property is not writable.

source

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value.

Panics

If the property does not exist, the type of the property is different than the provided value, or if the property is not writable.

source

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once.

Panics

This does not set any properties if one or more properties don’t exist, values of the wrong type are provided, or if any of the properties is not writable.

source

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once.

Panics

This does not set any properties if one or more properties don’t exist, values of the wrong type are provided, or if any of the properties is not writable.

source

fn property<V: for<'b> FromValue<'b> + 'static>(&self, property_name: &str) -> V

Gets the property property_name of the object and cast it to the type V.

Panics

If the property doesn’t exist or is not readable or of a different type than V.

source

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object.

Panics

If the property does not exist or is not writable.

source

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_.

If no type is provided then only the existence of the property is checked.

source

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object.

This returns None if the property does not exist.

source

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.

source

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.

source

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped.

This prevents the notify signal for all properties of this object to be emitted.

source

unsafe fn set_qdata<QD: 'static>(&self, key: Quark, value: QD)

Set arbitrary data on this object with the given key.

Safety

This function doesn’t store type information

source

unsafe fn qdata<QD: 'static>(&self, key: Quark) -> Option<NonNull<QD>>

Return previously set arbitrary data of this object with the given key.

Safety

The returned pointer can become invalid by a call to set_qdata, steal_qdata, set_data or steal_data.

The caller is responsible for ensuring the returned value is of a suitable type

source

unsafe fn steal_qdata<QD: 'static>(&self, key: Quark) -> Option<QD>

Retrieve previously set arbitrary data of this object with the given key.

The data is not set on the object anymore afterwards.

Safety

The caller is responsible for ensuring the returned value is of a suitable type

source

unsafe fn set_data<QD: 'static>(&self, key: &str, value: QD)

Set arbitrary data on this object with the given key.

Safety

This function doesn’t store type information

source

unsafe fn data<QD: 'static>(&self, key: &str) -> Option<NonNull<QD>>

Return previously set arbitrary data of this object with the given key.

Safety

The returned pointer can become invalid by a call to set_qdata, steal_qdata, set_data or steal_data.

The caller is responsible for ensuring the returned value is of a suitable type

source

unsafe fn steal_data<QD: 'static>(&self, key: &str) -> Option<QD>

Retrieve previously set arbitrary data of this object with the given key.

The data is not set on the object anymore afterwards.

Safety

The caller is responsible for ensuring the returned value is of a suitable type

source

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler.

It will not be called again during signal emissions until it is unblocked.

source

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.

source

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.

source

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.

source

fn connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object.

If after is set to true then the callback will be called after the default class handler of the signal is emitted, otherwise before.

Panics

If the signal does not exist.

source

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object.

If after is set to true then the callback will be called after the default class handler of the signal is emitted, otherwise before.

Same as Self::connect but takes a SignalId instead of a signal name.

Panics

If the signal does not exist.

source

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object.

If after is set to true then the callback will be called after the default class handler of the signal is emitted, otherwise before.

Same as Self::connect but takes a non-Send+Sync closure. If the signal is emitted from a different thread than it was connected to then the signal emission will panic.

Panics

If the signal does not exist.

source

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object.

If after is set to true then the callback will be called after the default class handler of the signal is emitted, otherwise before.

Same as Self::connect_id but takes a non-Send+Sync closure. If the signal is emitted from a different thread than it was connected to then the signal emission will panic.

Panics

This panics if the signal does not exist.

source

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object.

If after is set to true then the callback will be called after the default class handler of the signal is emitted, otherwise before.

Same as Self::connect but takes a non-Send+Sync and non-'static' closure. No runtime checks are performed for ensuring that the closure is called correctly.

Safety

The provided closure must be valid until the signal handler is disconnected, and it must be allowed to call the closure from the threads the signal is emitted from.

Panics

If the signal does not exist.

source

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object.

If after is set to true then the callback will be called after the default class handler of the signal is emitted, otherwise before.

Same as Self::connect_id but takes a non-Send+Sync and non-'static' closure. No runtime checks are performed for ensuring that the closure is called correctly.

Safety

The provided closure must be valid until the signal handler is disconnected, and it must be allowed to call the closure from the threads the signal is emitted from.

Panics

If the signal does not exist.

source

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object.

If after is set to true then the callback will be called after the default class handler of the signal is emitted, otherwise before.

This panics if the signal does not exist.

A recurring case is connecting a handler which will be automatically disconnected when an object it refers to is destroyed, as it happens with g_signal_connect_object in C. This can be achieved with a closure that watches an object: see the documentation of the closure! macro for more details.

Same as Self::connect but takes a Closure instead of a Fn.

source

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object.

If after is set to true then the callback will be called after the default class handler of the signal is emitted, otherwise before.

This panics if the signal does not exist.

Same as Self::connect_closure but takes a SignalId instead of a signal name.

source

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.

source

fn emit<R: TryFromClosureReturnValue>( &self, signal_id: SignalId, args: &[&dyn ToValue] ) -> R

Emit signal by signal id.

If the signal has a return value then this is returned here.

Panics

If the wrong number of arguments is provided, or arguments of the wrong types were provided.

source

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.

source

fn emit_by_name<R: TryFromClosureReturnValue>( &self, signal_name: &str, args: &[&dyn ToValue] ) -> R

Emit signal by its name.

If the signal has a return value then this is returned here.

Panics

If the signal does not exist, the wrong number of arguments is provided, or arguments of the wrong types were provided.

source

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Option<Value>

Emit signal by its name.

If the signal has a return value then this is returned here.

Panics

If the signal does not exist, the wrong number of arguments is provided, or arguments of the wrong types were provided.

source

fn emit_by_name_with_details<R: TryFromClosureReturnValue>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> R

Emit signal by its name with details.

If the signal has a return value then this is returned here.

Panics

If the wrong number of arguments is provided, or arguments of the wrong types were provided.

source

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by its name with details.

If the signal has a return value then this is returned here.

Panics

If the wrong number of arguments is provided, or arguments of the wrong types were provided.

source

fn emit_with_details<R: TryFromClosureReturnValue>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> R

Emit signal by signal id with details.

If the signal has a return value then this is returned here.

Panics

If the wrong number of arguments is provided, or arguments of the wrong types were provided.

source

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by signal id with details.

If the signal has a return value then this is returned here.

Panics

If the wrong number of arguments is provided, or arguments of the wrong types were provided.

source

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.

source

fn connect_notify<F: Fn(&Self, &ParamSpec) + Send + Sync + 'static>( &self, name: Option<&str>, f: F ) -> SignalHandlerId

Connect to the notify signal of the object.

This is emitted whenever a property is changed. If name is provided then the signal handler is only called for this specific property.

source

fn connect_notify_local<F: Fn(&Self, &ParamSpec) + 'static>( &self, name: Option<&str>, f: F ) -> SignalHandlerId

Connect to the notify signal of the object.

This is emitted whenever a property is changed. If name is provided then the signal handler is only called for this specific property.

This is like connect_notify but doesn’t require a Send+Sync closure. Signal emission will panic if the signal is emitted from the wrong thread.

source

unsafe fn connect_notify_unsafe<F: Fn(&Self, &ParamSpec)>( &self, name: Option<&str>, f: F ) -> SignalHandlerId

Connect to the notify signal of the object.

This is emitted whenever a property is changed. If name is provided then the signal handler is only called for this specific property.

This is like connect_notify but doesn’t require a Send+Sync or 'static closure. No runtime checks for wrongly calling the closure are performed.

Safety

The provided closure must be valid until the signal handler is disconnected, and it must be allowed to call the closure from the threads the signal is emitted from.

source

fn notify(&self, property_name: &str)

Notify that the given property has changed its value.

This emits the notify signal.

source

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value.

This emits the notify signal.

source

fn downgrade(&self) -> WeakRef<Self>

Downgrade this object to a weak reference.

source

fn add_weak_ref_notify<F: FnOnce() + Send + 'static>( &self, f: F ) -> WeakRefNotify<Self>

Add a callback to be notified when the Object is disposed.

source

fn add_weak_ref_notify_local<F: FnOnce() + 'static>( &self, f: F ) -> WeakRefNotify<Self>

Add a callback to be notified when the Object is disposed.

This is like add_weak_ref_notify but doesn’t require the closure to be Send. Object dispose will panic if the object is disposed from the wrong thread.

source

fn bind_property<'a, 'f, 't, O: ObjectType>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str ) -> BindingBuilder<'a, 'f, 't>

Bind property source_property on this object to the target_property on the target object.

This allows keeping the properties of both objects in sync.

The binding can be unidirectional or bidirectional and optionally it is possible to transform the property values before they’re passed to the other object.

source

fn ref_count(&self) -> u32

Returns the strong reference count of this object.

source

unsafe fn run_dispose(&self)

Runs the dispose mechanism of the object.

This will dispose of any references the object has to other objects, and among other things will disconnect all signal handlers.

Safety

Theoretically this is safe to run and afterwards the object is simply in a non-functional state, however many object implementations in C end up with memory safety issues if the object is used after disposal.

Implementors§