Struct gio::UnixSocketAddress

source ·
pub struct UnixSocketAddress { /* private fields */ }
Available on Unix only.
Expand description

Support for UNIX-domain (also known as local) sockets.

UNIX domain sockets are generally visible in the filesystem. However, some systems support abstract socket names which are not visible in the filesystem and not affected by the filesystem permissions, visibility, etc. Currently this is only supported under Linux. If you attempt to use abstract sockets on other systems, function calls may return IOErrorEnum::NotSupported errors. You can use abstract_names_supported() to see if abstract names are supported.

Since GLib 2.72, UnixSocketAddress is available on all platforms. It requires underlying system support (such as Windows 10 with AF_UNIX) at run time.

Before GLib 2.72, <gio/gunixsocketaddress.h> belonged to the UNIX-specific GIO interfaces, thus you had to use the gio-unix-2.0.pc pkg-config file when using it. This is no longer necessary since GLib 2.72.

Properties

abstract

Whether or not this is an abstract address

Readable | Writeable | Construct Only

address-type

Readable | Writeable | Construct Only

path

Readable | Writeable | Construct Only

path-as-array

Readable | Writeable | Construct Only

SocketAddress

family

Readable

Implements

UnixSocketAddressExt, SocketAddressExt, glib::ObjectExt, SocketConnectableExt, UnixSocketAddressExtManual

Implementations§

source§

impl UnixSocketAddress

source

pub fn new(path: &Path) -> UnixSocketAddress

Creates a new UnixSocketAddress for path.

To create abstract socket addresses, on systems that support that, use g_unix_socket_address_new_abstract().

path

the socket path

Returns

a new UnixSocketAddress

source

pub fn with_type(address_type: UnixSocketAddressPath<'_>) -> Self

Creates a new UnixSocketAddress of type type_ with name path.

If type_ is UnixSocketAddressType::Path, this is equivalent to calling new().

If type_ is UnixSocketAddressType::Anonymous, path and path_len will be ignored.

If path_type is UnixSocketAddressType::Abstract, then path_len bytes of path will be copied to the socket’s path, and only those bytes will be considered part of the name. (If path_len is -1, then path is assumed to be NUL-terminated.) For example, if path was “test”, then calling SocketAddressExt::native_size() on the returned socket would return 7 (2 bytes of overhead, 1 byte for the abstract-socket indicator byte, and 4 bytes for the name “test”).

If path_type is UnixSocketAddressType::AbstractPadded, then path_len bytes of path will be copied to the socket’s path, the rest of the path will be padded with 0 bytes, and the entire zero-padded buffer will be considered the name. (As above, if path_len is -1, then path is assumed to be NUL-terminated.) In this case, SocketAddressExt::native_size() will always return the full size of a struct sockaddr_un, although UnixSocketAddressExt::path_len() will still return just the length of path.

UnixSocketAddressType::Abstract is preferred over UnixSocketAddressType::AbstractPadded for new programs. Of course, when connecting to a server created by another process, you must use the appropriate type corresponding to how that process created its listening socket.

path

the name

type_

a UnixSocketAddressType

Returns

a new UnixSocketAddress

source§

impl UnixSocketAddress

source

pub const NONE: Option<&'static UnixSocketAddress> = None

source

pub fn abstract_names_supported() -> bool

Checks if abstract UNIX domain socket names are supported.

Returns

true if supported, false otherwise

Trait Implementations§

source§

impl Clone for UnixSocketAddress

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for UnixSocketAddress

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Display for UnixSocketAddress

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl HasParamSpec for UnixSocketAddress

§

type ParamSpec = ParamSpecObject

§

type SetValue = UnixSocketAddress

Preferred value to be used as setter for the associated ParamSpec.
§

type BuilderFn = fn(_: &str) -> ParamSpecObjectBuilder<'_, UnixSocketAddress>

source§

fn param_spec_builder() -> Self::BuilderFn

source§

impl Hash for UnixSocketAddress

source§

fn hash<H>(&self, state: &mut H)
where H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for UnixSocketAddress

source§

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl ParentClassIs for UnixSocketAddress

source§

impl<OT: ObjectType> PartialEq<OT> for UnixSocketAddress

source§

fn eq(&self, other: &OT) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<OT: ObjectType> PartialOrd<OT> for UnixSocketAddress

source§

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for UnixSocketAddress

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl Eq for UnixSocketAddress

source§

impl IsA<SocketAddress> for UnixSocketAddress

source§

impl IsA<SocketConnectable> for UnixSocketAddress

source§

impl Send for UnixSocketAddress

source§

impl Sync for UnixSocketAddress

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Cast for T
where T: ObjectType,

source§

fn upcast<T>(self) -> T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more
source§

fn upcast_ref<T>(&self) -> &T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more
source§

fn downcast<T>(self) -> Result<T, Self>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a subclass or interface implementor T. Read more
source§

fn downcast_ref<T>(&self) -> Option<&T>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more
source§

fn dynamic_cast<T>(self) -> Result<T, Self>
where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more
source§

fn dynamic_cast_ref<T>(&self) -> Option<&T>
where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
source§

unsafe fn unsafe_cast<T>(self) -> T
where T: ObjectType,

Casts to T unconditionally. Read more
source§

unsafe fn unsafe_cast_ref<T>(&self) -> &T
where T: ObjectType,

Casts to &T unconditionally. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoClosureReturnValue for T
where T: Into<Value>,

source§

impl<U> IsSubclassableExt for U

source§

impl<T> ObjectExt for T
where T: ObjectType,

source§

fn is<U>(&self) -> bool
where U: StaticType,

Returns true if the object is an instance of (can be cast to) T.
source§

fn type_(&self) -> Type

Returns the type of the object.
source§

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more
source§

fn class(&self) -> &Class<T>
where T: IsClass,

Returns the class of the object.
source§

fn class_of<U>(&self) -> Option<&Class<U>>
where U: IsClass,

Returns the class of the object in the given type T. Read more
source§

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>
where U: IsInterface,

Returns the interface T of the object. Read more
source§

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more
source§

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more
source§

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more
source§

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more
source§

fn property<V>(&self, property_name: &str) -> V
where V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more
source§

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more
source§

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_. Read more
source§

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more
source§

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.
source§

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.
source§

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more
source§

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn set_data<QD>(&self, key: &str, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more
source§

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.
source§

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.
source§

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.
source§

fn connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more
source§

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more
source§

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more
source§

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more
source§

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more
source§

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more
source§

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.
source§

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> R

Emit signal by signal id. Read more
source§

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.
source§

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> R

Emit signal by its name. Read more
source§

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Option<Value>

Emit signal by its name. Read more
source§

fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> R

Emit signal by its name with details. Read more
source§

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by its name with details. Read more
source§

fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> R

Emit signal by signal id with details. Read more
source§

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by signal id with details. Read more
source§

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.
source§

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + Send + Sync + 'static,

Connect to the notify signal of the object. Read more
source§

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + 'static,

Connect to the notify signal of the object. Read more
source§

unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F ) -> SignalHandlerId
where F: Fn(&T, &ParamSpec),

Connect to the notify signal of the object. Read more
source§

fn notify(&self, property_name: &str)

Notify that the given property has changed its value. Read more
source§

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value. Read more
source§

fn downgrade(&self) -> WeakRef<T>

Downgrade this object to a weak reference.
source§

fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + Send + 'static,

Add a callback to be notified when the Object is disposed.
source§

fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + 'static,

Add a callback to be notified when the Object is disposed. Read more
source§

fn bind_property<'f, 't, O, 'a>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str ) -> BindingBuilder<'a, 'f, 't>
where O: ObjectType,

Bind property source_property on this object to the target_property on the target object. Read more
source§

fn ref_count(&self) -> u32

Returns the strong reference count of this object.
source§

unsafe fn run_dispose(&self)

Runs the dispose mechanism of the object. Read more
source§

impl<T> Property for T
where T: HasParamSpec,

§

type Value = T

source§

impl<T> PropertyGet for T
where T: HasParamSpec,

§

type Value = T

source§

fn get<R, F>(&self, f: F) -> R
where F: Fn(&<T as PropertyGet>::Value) -> R,

source§

impl<O> SocketAddressExt for O
where O: IsA<SocketAddress>,

source§

fn family(&self) -> SocketFamily

Gets the socket family type of self. Read more
source§

fn native_size(&self) -> isize

Gets the size of self’s native struct sockaddr. You can use this to allocate memory to pass to g_socket_address_to_native(). Read more
source§

fn connect_family_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

impl<O> SocketConnectableExt for O

source§

fn enumerate(&self) -> SocketAddressEnumerator

source§

fn proxy_enumerate(&self) -> SocketAddressEnumerator

Creates a SocketAddressEnumerator for self that will return a ProxyAddress for each of its addresses that you must connect to via a proxy. Read more
source§

fn to_string(&self) -> GString

Format a SocketConnectable as a string. This is a human-readable format for use in debugging output, and is not a stable serialization format. It is not suitable for use in user interfaces as it exposes too much information for a user. Read more
source§

impl<T> StaticTypeExt for T
where T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToSendValue for T
where T: Send + ToValue + ?Sized,

source§

fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.
source§

impl<T> ToString for T
where T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T> TransparentType for T

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for T
where T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<O> UnixSocketAddressExt for O

source§

fn address_type(&self) -> UnixSocketAddressType

Available on Unix only.
Gets self’s type. Read more
source§

fn is_abstract(&self) -> bool

Available on Unix only.
Tests if self is abstract. Read more
source§

fn path_len(&self) -> usize

Available on Unix only.
Gets the length of self’s path. Read more
source§

fn path_as_array(&self) -> Option<ByteArray>

Available on Unix only.
source§

impl<O> UnixSocketAddressExtManual for O

source§

fn path(&self) -> Option<UnixSocketAddressPath<'_>>

Gets self’s path, or for abstract sockets the “name”. Read more
source§

impl<'a, T, C, E> FromValueOptional<'a> for T
where T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,

source§

impl<Super, Sub> MayDowncastTo<Sub> for Super
where Super: IsA<Super>, Sub: IsA<Super>,