Struct gio :: InetAddress Copy item path

impl InetAddress

pub fn from_bytes(inet_address_bytes: InetAddressBytes<'_>) -> Self

Creates a new #GInetAddress from the given @family and @bytes. @bytes should be 4 bytes for SocketFamily::Ipv4 and 16 bytes for SocketFamily::Ipv6.

§`bytes`

raw address data

§`family`

the address family of @bytes

§Returns

a new #GInetAddress corresponding to @family and @bytes. Free the returned object with g_object_unref().

impl InetAddress

pub const NONE: Option<&'static InetAddress> = None

pub fn new_any(family: SocketFamily) -> InetAddress

Creates a #GInetAddress for the “any” address (unassigned/“don’t care”) for @family.

§`family`

the address family

§Returns

a new #GInetAddress corresponding to the “any” address for @family. Free the returned object with g_object_unref().

pub fn from_string(string: &str) -> Option<InetAddress>

Parses @string as an IP address and creates a new #GInetAddress.

§`string`

a string representation of an IP address

§Returns

a new #GInetAddress corresponding to @string, or None if @string could not be parsed. Free the returned object with g_object_unref().

pub fn new_loopback(family: SocketFamily) -> InetAddress

Creates a #GInetAddress for the loopback address for @family.

§`family`

the address family

§Returns

a new #GInetAddress corresponding to the loopback address for @family. Free the returned object with g_object_unref().

Trait Implementations§

impl Clone for InetAddress

fn clone(&self) -> Self

Makes a clone of this shared reference.

This increments the strong reference count of the object. Dropping the object will decrement it again.

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for InetAddress

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Display for InetAddress

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl From<InetAddress> for IpAddr

fn from(addr: InetAddress) -> Self

Converts to this type from the input type.

impl From<IpAddr> for InetAddress

fn from(addr: IpAddr) -> Self

Converts to this type from the input type.

impl HasParamSpec for InetAddress

type ParamSpec = ParamSpecObject

type SetValue = InetAddress

Preferred value to be used as setter for the associated ParamSpec.

fn hash<H>(&self, state: &mut H)
where H: Hasher,

Hashes the memory address of this object.

1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more

impl Ord for InetAddress

fn cmp(&self, other: &Self) -> Ordering

Comparison for two GObjects.

Compares the memory addresses of the provided objects.

1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more

1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more

1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more

impl ParentClassIs for InetAddress

impl<OT: ObjectType> PartialEq<OT> for InetAddress

fn eq(&self, other: &OT) -> bool

Equality for two GObjects.

Two GObjects are equal if their memory addresses are equal.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<OT: ObjectType> PartialOrd<OT> for InetAddress

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

Partial comparison for two GObjects.

Compares the memory addresses of the provided objects.

1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl StaticType for InetAddress

fn static_type() -> Type

Returns the type identifier of Self.

Auto Trait Implementations§

impl RefUnwindSafe for InetAddress

impl UnwindSafe for InetAddress

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> Cast for T
where T: ObjectType,

fn upcast<T>(self) -> T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more

fn upcast_ref<T>(&self) -> &T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more

fn downcast<T>(self) -> Result<T, Self>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a subclass or interface implementor T. Read more

fn downcast_ref<T>(&self) -> Option<&T>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more

fn dynamic_cast<T>(self) -> Result<T, Self>
where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more

fn dynamic_cast_ref<T>(&self) -> Option<&T>
where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more

unsafe fn unsafe_cast<T>(self) -> T
where T: ObjectType,

Casts to T unconditionally. Read more

unsafe fn unsafe_cast_ref<T>(&self) -> &T
where T: ObjectType,

Casts to &T unconditionally. Read more

impl<T> CloneToUninit for T
where T: Clone,

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *const GList, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec(_: *const GList, _: usize) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(_: *const GList, _: usize) -> Vec<T>

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *const GPtrArray, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize, ) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(_: *const GPtrArray, _: usize) -> Vec<T>

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *const GSList, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize, ) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *const GList) -> Vec<T>

unsafe fn from_glib_container_as_vec(_: *const GList) -> Vec<T>

unsafe fn from_glib_full_as_vec(_: *const GList) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T>

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T>

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *const GSList) -> Vec<T>

unsafe fn from_glib_container_as_vec(_: *const GSList) -> Vec<T>

unsafe fn from_glib_full_as_vec(_: *const GSList) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T>

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T>

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T>

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T>

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T>

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T>

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T>

impl<O> InetAddressExt for O
where O: IsA<InetAddress>,

fn equal(&self, other_address: &impl IsA<InetAddress>) -> bool

fn family(&self) -> SocketFamily

Gets @self’s family Read more

fn is_any(&self) -> bool

Tests whether @self is the “any” address for its family. Read more

fn is_link_local(&self) -> bool

Tests whether @self is a link-local address (that is, if it identifies a host on a local network that is not connected to the Internet). Read more

fn is_loopback(&self) -> bool

Tests whether @self is the loopback address for its family. Read more

fn is_mc_global(&self) -> bool

Tests whether @self is a global multicast address. Read more

fn is_mc_link_local(&self) -> bool

Tests whether @self is a link-local multicast address. Read more

fn is_mc_node_local(&self) -> bool

Tests whether @self is a node-local multicast address. Read more

fn is_mc_org_local(&self) -> bool

Tests whether @self is an organization-local multicast address. Read more

fn is_mc_site_local(&self) -> bool

Tests whether @self is a site-local multicast address. Read more

fn is_multicast(&self) -> bool

Tests whether @self is a multicast address. Read more

fn is_site_local(&self) -> bool

Tests whether @self is a site-local address such as 10.0.0.1 (that is, the address identifies a host on a local network that can not be reached directly from the Internet, but which may have outgoing Internet connectivity via a NAT or firewall). Read more

fn native_size(&self) -> usize

Gets the size of the native raw binary address for @self. This is the size of the data that you get from g_inet_address_to_bytes(). Read more

fn to_str(&self) -> GString

Converts @self to string form. Read more

fn connect_is_any_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

fn connect_is_link_local_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

fn connect_is_loopback_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

fn connect_is_mc_global_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

fn connect_is_mc_link_local_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

fn connect_is_mc_node_local_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

fn connect_is_mc_org_local_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

fn connect_is_mc_site_local_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

fn connect_is_multicast_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

fn connect_is_site_local_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

impl<O> InetAddressExtManual for O
where O: IsA<InetAddress>,

fn to_bytes(&self) -> Option<InetAddressBytes<'_>>

Returns None in case the address has a native size different than 4 and 16. Gets the raw binary address data from @self. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoClosureReturnValue for T
where T: Into<Value>,

fn into_closure_return_value(self) -> Option<Value>

impl IsSubclassableExt for U
where U: IsClass + ParentClassIs,

fn parent_class_init<T>(class: &mut Class)
where T: ObjectSubclass, ::Parent: IsSubclassable<T>,

fn parent_instance_init<T>(instance: &mut InitializingObject<T>)
where T: ObjectSubclass, ::Parent: IsSubclassable<T>,

impl<T> ObjectExt for T
where T: ObjectType,

fn is(&self) -> bool
where U: StaticType,

Returns true if the object is an instance of (can be cast to) T.

fn type_(&self) -> Type

Returns the type of the object.

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more

fn class(&self) -> &Class<T>
where T: IsClass,

Returns the class of the object.

fn class_of(&self) -> Option<&Class>
where U: IsClass,

Returns the class of the object in the given type T. Read more

fn interface(&self) -> Option<InterfaceRef<'_, U>>
where U: IsInterface,

Returns the interface T of the object. Read more

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more

fn property<V>(&self, property_name: &str) -> V
where V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_. Read more

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more

unsafe fn set_data<QD>(&self, key: &str, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.

fn connect<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure, ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure, ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.