Struct gtk4::Constraint

source ·
#[repr(transparent)]
pub struct Constraint { /* private fields */ }
Expand description

Constraint describes a constraint between attributes of two widgets, expressed as a linear equation.

The typical equation for a constraint is:

  target.target_attr = source.source_attr × multiplier + constant

Each Constraint is part of a system that will be solved by a ConstraintLayout in order to allocate and position each child widget or guide.

The source and target, as well as their attributes, of a Constraint instance are immutable after creation.

Properties

constant

The constant value to be added to the source-attribute.

Readable | Writeable | Construct Only

multiplier

The multiplication factor to be applied to the source-attribute.

Readable | Writeable | Construct Only

relation

The order relation between the terms of the constraint.

Readable | Writeable | Construct Only

source

The source of the constraint.

The constraint will set the target-attribute property of the target using the source-attribute property of the source.

Readable | Writeable | Construct Only

source-attribute

The attribute of the source read by the constraint.

Readable | Writeable | Construct Only

strength

The strength of the constraint.

The strength can be expressed either using one of the symbolic values of the ConstraintStrength enumeration, or any positive integer value.

Readable | Writeable | Construct Only

target

The target of the constraint.

The constraint will set the target-attribute property of the target using the source-attribute property of the source widget.

Readable | Writeable | Construct Only

target-attribute

The attribute of the target set by the constraint.

Readable | Writeable | Construct Only

Implements

glib::ObjectExt

Implementations§

source§

impl Constraint

source

pub fn new( target: Option<&impl IsA<ConstraintTarget>>, target_attribute: ConstraintAttribute, relation: ConstraintRelation, source: Option<&impl IsA<ConstraintTarget>>, source_attribute: ConstraintAttribute, multiplier: f64, constant: f64, strength: i32 ) -> Constraint

Creates a new constraint representing a relation between a layout attribute on a source and a layout attribute on a target.

target

the target of the constraint

target_attribute

the attribute of target to be set

relation

the relation equivalence between target_attribute and source_attribute

source

the source of the constraint

source_attribute

the attribute of source to be read

multiplier

a multiplication factor to be applied to source_attribute

constant

a constant factor to be added to source_attribute

strength

the strength of the constraint

Returns

the newly created constraint

source

pub fn new_constant( target: Option<&impl IsA<ConstraintTarget>>, target_attribute: ConstraintAttribute, relation: ConstraintRelation, constant: f64, strength: i32 ) -> Constraint

Creates a new constraint representing a relation between a layout attribute on a target and a constant value.

target

a the target of the constraint

target_attribute

the attribute of target to be set

relation

the relation equivalence between target_attribute and constant

constant

a constant factor to be set on target_attribute

strength

the strength of the constraint

Returns

the newly created constraint

source

pub fn builder() -> ConstraintBuilder

Creates a new builder-pattern struct instance to construct Constraint objects.

This method returns an instance of ConstraintBuilder which can be used to create Constraint objects.

source

pub fn constant(&self) -> f64

Retrieves the constant factor added to the source attributes’ value.

Returns

a constant factor

source

pub fn multiplier(&self) -> f64

Retrieves the multiplication factor applied to the source attribute’s value.

Returns

a multiplication factor

source

pub fn relation(&self) -> ConstraintRelation

The order relation between the terms of the constraint.

Returns

a relation type

source

pub fn source(&self) -> Option<ConstraintTarget>

Retrieves the ConstraintTarget used as the source for the constraint.

If the source is set to NULL at creation, the constraint will use the widget using the ConstraintLayout as the source.

Returns

the source of the constraint

source

pub fn source_attribute(&self) -> ConstraintAttribute

Retrieves the attribute of the source to be read by the constraint.

Returns

the source’s attribute

source

pub fn strength(&self) -> i32

Retrieves the strength of the constraint.

Returns

the strength value

source

pub fn target(&self) -> Option<ConstraintTarget>

Retrieves the ConstraintTarget used as the target for the constraint.

If the targe is set to NULL at creation, the constraint will use the widget using the ConstraintLayout as the target.

Returns

a ConstraintTarget

source

pub fn target_attribute(&self) -> ConstraintAttribute

Retrieves the attribute of the target to be set by the constraint.

Returns

the target’s attribute

source

pub fn is_attached(&self) -> bool

Checks whether the constraint is attached to a ConstraintLayout, and it is contributing to the layout.

Returns

TRUE if the constraint is attached

source

pub fn is_constant(&self) -> bool

Checks whether the constraint describes a relation between an attribute on the target and a constant value.

Returns

TRUE if the constraint is a constant relation

source

pub fn is_required(&self) -> bool

Checks whether the constraint is a required relation for solving the constraint layout.

Returns

true if the constraint is required

Trait Implementations§

source§

impl Clone for Constraint

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for Constraint

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for Constraint

source§

fn default() -> Self

Returns the “default value” for a type. Read more
source§

impl Display for Constraint

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl HasParamSpec for Constraint

§

type ParamSpec = ParamSpecObject

§

type SetValue = Constraint

Preferred value to be used as setter for the associated ParamSpec.
§

type BuilderFn = fn(_: &str) -> ParamSpecObjectBuilder<'_, Constraint>

source§

fn param_spec_builder() -> Self::BuilderFn

source§

impl Hash for Constraint

source§

fn hash<H>(&self, state: &mut H)where H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for Constraint

source§

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl ParentClassIs for Constraint

source§

impl<OT: ObjectType> PartialEq<OT> for Constraint

source§

fn eq(&self, other: &OT) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<OT: ObjectType> PartialOrd<OT> for Constraint

source§

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for Constraint

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl Eq for Constraint

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Cast for Twhere T: ObjectType,

source§

fn upcast<T>(self) -> Twhere T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more
source§

fn upcast_ref<T>(&self) -> &Twhere T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more
source§

fn downcast<T>(self) -> Result<T, Self>where T: ObjectType, Self: CanDowncast<T>,

Tries to downcast to a subclass or interface implementor T. Read more
source§

fn downcast_ref<T>(&self) -> Option<&T>where T: ObjectType, Self: CanDowncast<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more
source§

fn dynamic_cast<T>(self) -> Result<T, Self>where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more
source§

fn dynamic_cast_ref<T>(&self) -> Option<&T>where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
source§

unsafe fn unsafe_cast<T>(self) -> Twhere T: ObjectType,

Casts to T unconditionally. Read more
source§

unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere T: ObjectType,

Casts to &T unconditionally. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoClosureReturnValue for Twhere T: Into<Value>,

source§

impl<U> IsSubclassableExt for Uwhere U: IsClass + ParentClassIs,

source§

impl<T> ObjectExt for Twhere T: ObjectType,

source§

fn is<U>(&self) -> boolwhere U: StaticType,

Returns true if the object is an instance of (can be cast to) T.
source§

fn type_(&self) -> Type

Returns the type of the object.
source§

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more
source§

fn class(&self) -> &Class<T>where T: IsClass,

Returns the class of the object.
source§

fn class_of<U>(&self) -> Option<&Class<U>>where U: IsClass,

Returns the class of the object in the given type T. Read more
source§

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where U: IsInterface,

Returns the interface T of the object. Read more
source§

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more
source§

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more
source§

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more
source§

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more
source§

fn property<V>(&self, property_name: &str) -> Vwhere V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more
source§

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more
source§

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_. Read more
source§

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more
source§

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.
source§

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.
source§

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more
source§

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn set_data<QD>(&self, key: &str, value: QD)where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more
source§

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.
source§

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.
source§

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.
source§

fn connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more
source§

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more
source§

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more
source§

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more
source§

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more
source§

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more
source§

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.
source§

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by signal id. Read more
source§

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.
source§

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by its name. Read more
source§

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Option<Value>

Emit signal by its name. Read more
source§

fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by its name with details. Read more
source§

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by its name with details. Read more
source§

fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by signal id with details. Read more
source§

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by signal id with details. Read more
source§

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.
source§

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec) + Send + Sync + 'static,

Connect to the notify signal of the object. Read more
source§

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec) + 'static,

Connect to the notify signal of the object. Read more
source§

unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F ) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec),

Connect to the notify signal of the object. Read more
source§

fn notify(&self, property_name: &str)

Notify that the given property has changed its value. Read more
source§

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value. Read more
source§

fn downgrade(&self) -> WeakRef<T>

Downgrade this object to a weak reference.
source§

fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>where F: FnOnce() + Send + 'static,

Add a callback to be notified when the Object is disposed.
source§

fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>where F: FnOnce() + 'static,

Add a callback to be notified when the Object is disposed. Read more
source§

fn bind_property<'f, 't, O, 'a>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str ) -> BindingBuilder<'a, 'f, 't>where O: ObjectType,

Bind property source_property on this object to the target_property on the target object. Read more
source§

fn ref_count(&self) -> u32

Returns the strong reference count of this object.
source§

unsafe fn run_dispose(&self)

Runs the dispose mechanism of the object. Read more
source§

impl<T> Property for Twhere T: HasParamSpec,

§

type Value = T

source§

impl<T> PropertyGet for Twhere T: HasParamSpec,

§

type Value = T

source§

fn get<R, F>(&self, f: F) -> Rwhere F: Fn(&<T as PropertyGet>::Value) -> R,

source§

impl<T> StaticTypeExt for Twhere T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T> TransparentType for Twhere T: TransparentPtrType,

source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for Twhere T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<Super, Sub> CanDowncast<Sub> for Superwhere Super: IsA<Super>, Sub: IsA<Super>,

source§

impl<'a, T, C, E> FromValueOptional<'a> for Twhere T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,