Struct gtk4::PrintUnixDialog
source · #[repr(transparent)]pub struct PrintUnixDialog { /* private fields */ }
Expand description
PrintUnixDialog
implements a print dialog for platforms
which don’t provide a native print dialog, like Unix.
It can be used very much like any other GTK dialog, at the cost of
the portability offered by the high-level printing API with
PrintOperation
.
In order to print something with PrintUnixDialog
, you need to
use selected_printer()
to obtain a
Printer
object and use it to construct a PrintJob
using PrintJob::new()
.
PrintUnixDialog
uses the following response values:
ResponseType::Ok
: for the “Print” buttonResponseType::Apply
: for the “Preview” buttonResponseType::Cancel
: for the “Cancel” button
GtkPrintUnixDialog as GtkBuildable
The PrintUnixDialog
implementation of the Buildable
interface
exposes its @notebook internal children with the name “notebook”.
An example of a PrintUnixDialog
UI definition fragment:
<object class="GtkPrintUnixDialog" id="dialog1">
<child internal-child="notebook">
<object class="GtkNotebook" id="notebook">
<child>
<object type="GtkNotebookPage">
<property name="tab_expand">False</property>
<property name="tab_fill">False</property>
<property name="tab">
<object class="GtkLabel" id="tablabel">
<property name="label">Tab label</property>
</object>
</property>
<property name="child">
<object class="GtkLabel" id="tabcontent">
<property name="label">Content on notebook tab</property>
</object>
</property>
</object>
</child>
</object>
</child>
</object>
CSS nodes
PrintUnixDialog
has a single CSS node with name window. The style classes
dialog and print are added.
Properties
current-page
The current page in the document.
Readable | Writeable
embed-page-setup
true
if the page setup controls are embedded.
Readable | Writeable
has-selection
Whether the application has a selection.
Readable | Writeable
manual-capabilities
Capabilities the application can handle.
Readable | Writeable
page-setup
The PageSetup
object to use.
Readable | Writeable
print-settings
The PrintSettings
object used for this dialog.
Readable | Writeable
selected-printer
The Printer
which is selected.
Readable
support-selection
Whether the dialog supports selection.
Readable | Writeable
Dialog
use-header-bar
true
if the dialog uses a headerbar for action buttons
instead of the action-area.
For technical reasons, this property is declared as an integer
property, but you should only set it to true
or false
.
Creating a dialog with headerbar
Builtin Dialog
subclasses such as ColorChooserDialog
set this property according to platform conventions (using the
gtk-dialogs-use-header
setting).
Here is how you can achieve the same:
⚠️ The following code is in c ⚠️
g_object_get (settings, "gtk-dialogs-use-header", &header, NULL);
dialog = g_object_new (GTK_TYPE_DIALOG, header, TRUE, NULL);
Readable | Writeable | Construct Only
Window
application
The Application
associated with the window.
The application will be kept alive for at least as long as it has any windows associated with it (see g_application_hold() for a way to keep it alive without windows).
Normally, the connection between the application and the window
will remain until the window is destroyed, but you can explicitly
remove it by setting the :application property to None
.
Readable | Writeable
child
The child widget.
Readable | Writeable
decorated
Whether the window should have a frame (also known as decorations).
Readable | Writeable
default-height
The default height of the window.
Readable | Writeable
default-widget
The default widget.
Readable | Writeable
default-width
The default width of the window.
Readable | Writeable
deletable
Whether the window frame should have a close button.
Readable | Writeable
destroy-with-parent
If this window should be destroyed when the parent is destroyed.
Readable | Writeable
display
The display that will display this window.
Readable | Writeable
focus-visible
Whether ‘focus rectangles’ are currently visible in this window.
This property is maintained by GTK based on user input and should not be set by applications.
Readable | Writeable
focus-widget
The focus widget.
Readable | Writeable
fullscreened
Whether the window is fullscreen.
Setting this property is the equivalent of calling
GtkWindowExt::fullscreen()
or GtkWindowExt::unfullscreen()
;
either operation is asynchronous, which means you will need to
connect to the ::notify signal in order to know whether the
operation was successful.
Readable | Writeable | Construct
handle-menubar-accel
Whether the window frame should handle F10 for activating menubars.
Readable | Writeable
hide-on-close
If this window should be hidden when the users clicks the close button.
Readable | Writeable
icon-name
Specifies the name of the themed icon to use as the window icon.
See IconTheme
for more details.
Readable | Writeable
is-active
Whether the toplevel is the currently active window.
Readable
maximized
Whether the window is maximized.
Setting this property is the equivalent of calling
GtkWindowExt::maximize()
or GtkWindowExt::unmaximize()
;
either operation is asynchronous, which means you will need to
connect to the ::notify signal in order to know whether the
operation was successful.
Readable | Writeable | Construct
mnemonics-visible
Whether mnemonics are currently visible in this window.
This property is maintained by GTK based on user input, and should not be set by applications.
Readable | Writeable
modal
If true
, the window is modal.
Readable | Writeable
resizable
If true
, users can resize the window.
Readable | Writeable
startup-id
A write-only property for setting window’s startup notification identifier.
Writeable
title
The title of the window.
Readable | Writeable
titlebar
The titlebar widget.
Readable | Writeable
transient-for
The transient parent of the window.
Readable | Writeable | Construct
Widget
can-focus
Whether the widget or any of its descendents can accept the input focus.
This property is meant to be set by widget implementations, typically in their instance init function.
Readable | Writeable
can-target
Whether the widget can receive pointer events.
Readable | Writeable
css-classes
A list of css classes applied to this widget.
Readable | Writeable
css-name
The name of this widget in the CSS tree.
This property is meant to be set by widget implementations, typically in their instance init function.
Readable | Writeable | Construct Only
cursor
The cursor used by @widget.
Readable | Writeable
focus-on-click
Whether the widget should grab focus when it is clicked with the mouse.
This property is only relevant for widgets that can take focus.
Readable | Writeable
focusable
Whether this widget itself will accept the input focus.
Readable | Writeable
halign
How to distribute horizontal space if widget gets extra space.
Readable | Writeable
has-default
Whether the widget is the default widget.
Readable
has-focus
Whether the widget has the input focus.
Readable
has-tooltip
Enables or disables the emission of the ::query-tooltip signal on @widget.
A value of true
indicates that @widget can have a tooltip, in this case
the widget will be queried using query-tooltip
to
determine whether it will provide a tooltip or not.
Readable | Writeable
height-request
Override for height request of the widget.
If this is -1, the natural request will be used.
Readable | Writeable
hexpand
Whether to expand horizontally.
Readable | Writeable
hexpand-set
Whether to use the hexpand
property.
Readable | Writeable
layout-manager
The LayoutManager
instance to use to compute the preferred size
of the widget, and allocate its children.
This property is meant to be set by widget implementations, typically in their instance init function.
Readable | Writeable
margin-bottom
Margin on bottom side of widget.
This property adds margin outside of the widget’s normal size
request, the margin will be added in addition to the size from
WidgetExt::set_size_request()
for example.
Readable | Writeable
margin-end
Margin on end of widget, horizontally.
This property supports left-to-right and right-to-left text directions.
This property adds margin outside of the widget’s normal size
request, the margin will be added in addition to the size from
WidgetExt::set_size_request()
for example.
Readable | Writeable
margin-start
Margin on start of widget, horizontally.
This property supports left-to-right and right-to-left text directions.
This property adds margin outside of the widget’s normal size
request, the margin will be added in addition to the size from
WidgetExt::set_size_request()
for example.
Readable | Writeable
margin-top
Margin on top side of widget.
This property adds margin outside of the widget’s normal size
request, the margin will be added in addition to the size from
WidgetExt::set_size_request()
for example.
Readable | Writeable
name
The name of the widget.
Readable | Writeable
opacity
The requested opacity of the widget.
Readable | Writeable
overflow
How content outside the widget’s content area is treated.
This property is meant to be set by widget implementations, typically in their instance init function.
Readable | Writeable
parent
The parent widget of this widget.
Readable
receives-default
Whether the widget will receive the default action when it is focused.
Readable | Writeable
root
The Root
widget of the widget tree containing this widget.
This will be None
if the widget is not contained in a root widget.
Readable
scale-factor
The scale factor of the widget.
Readable
sensitive
Whether the widget responds to input.
Readable | Writeable
tooltip-markup
Sets the text of tooltip to be the given string, which is marked up with Pango markup.
Also see Tooltip::set_markup()
.
This is a convenience property which will take care of getting the
tooltip shown if the given string is not None
:
has-tooltip
will automatically be set to true
and there will be taken care of query-tooltip
in
the default signal handler.
Note that if both tooltip-text
and
tooltip-markup
are set, the last one wins.
Readable | Writeable
tooltip-text
Sets the text of tooltip to be the given string.
Also see Tooltip::set_text()
.
This is a convenience property which will take care of getting the
tooltip shown if the given string is not None
:
has-tooltip
will automatically be set to true
and there will be taken care of query-tooltip
in
the default signal handler.
Note that if both tooltip-text
and
tooltip-markup
are set, the last one wins.
Readable | Writeable
valign
How to distribute vertical space if widget gets extra space.
Readable | Writeable
vexpand
Whether to expand vertically.
Readable | Writeable
vexpand-set
Whether to use the vexpand
property.
Readable | Writeable
visible
Whether the widget is visible.
Readable | Writeable
width-request
Override for width request of the widget.
If this is -1, the natural request will be used.
Readable | Writeable
Accessible
accessible-role
The accessible role of the given Accessible
implementation.
The accessible role cannot be changed once set.
Readable | Writeable
Implements
DialogExt
, GtkWindowExt
, WidgetExt
, glib::ObjectExt
, AccessibleExt
, BuildableExt
, ConstraintTargetExt
, NativeExt
, RootExt
, ShortcutManagerExt
, DialogExtManual
, WidgetExtManual
, AccessibleExtManual
Implementations§
source§impl PrintUnixDialog
impl PrintUnixDialog
sourcepub fn new(
title: Option<&str>,
parent: Option<&impl IsA<Window>>
) -> PrintUnixDialog
pub fn new( title: Option<&str>, parent: Option<&impl IsA<Window>> ) -> PrintUnixDialog
Creates a new PrintUnixDialog
.
title
Title of the dialog
parent
Transient parent of the dialog
Returns
a new PrintUnixDialog
sourcepub fn builder() -> PrintUnixDialogBuilder
pub fn builder() -> PrintUnixDialogBuilder
Creates a new builder-pattern struct instance to construct PrintUnixDialog
objects.
This method returns an instance of PrintUnixDialogBuilder
which can be used to create PrintUnixDialog
objects.
sourcepub fn current_page(&self) -> i32
pub fn current_page(&self) -> i32
sourcepub fn embeds_page_setup(&self) -> bool
pub fn embeds_page_setup(&self) -> bool
sourcepub fn has_selection(&self) -> bool
pub fn has_selection(&self) -> bool
sourcepub fn manual_capabilities(&self) -> PrintCapabilities
pub fn manual_capabilities(&self) -> PrintCapabilities
sourcepub fn page_setup(&self) -> PageSetup
pub fn page_setup(&self) -> PageSetup
sourcepub fn is_page_setup_set(&self) -> bool
pub fn is_page_setup_set(&self) -> bool
sourcepub fn selected_printer(&self) -> Option<Printer>
pub fn selected_printer(&self) -> Option<Printer>
sourcepub fn settings(&self) -> PrintSettings
pub fn settings(&self) -> PrintSettings
Gets a new PrintSettings
object that represents the
current values in the print dialog.
Note that this creates a new object, and you need to unref it if don’t want to keep it.
Returns
a new PrintSettings
object with the values from @self
sourcepub fn supports_selection(&self) -> bool
pub fn supports_selection(&self) -> bool
Gets whether the print dialog allows user to print a selection.
Returns
whether the application supports print of selection
sourcepub fn set_current_page(&self, current_page: i32)
pub fn set_current_page(&self, current_page: i32)
Sets the current page number.
If @current_page is not -1, this enables the current page choice for the range of pages to print.
current_page
the current page number.
sourcepub fn set_embed_page_setup(&self, embed: bool)
pub fn set_embed_page_setup(&self, embed: bool)
Embed page size combo box and orientation combo box into page setup page.
embed
embed page setup selection
sourcepub fn set_has_selection(&self, has_selection: bool)
pub fn set_has_selection(&self, has_selection: bool)
sourcepub fn set_manual_capabilities(&self, capabilities: PrintCapabilities)
pub fn set_manual_capabilities(&self, capabilities: PrintCapabilities)
This lets you specify the printing capabilities your application supports.
For instance, if you can handle scaling the output then you pass
PrintCapabilities::SCALE
. If you don’t pass that, then the dialog
will only let you select the scale if the printing system automatically
handles scaling.
capabilities
the printing capabilities of your application
sourcepub fn set_page_setup(&self, page_setup: &PageSetup)
pub fn set_page_setup(&self, page_setup: &PageSetup)
sourcepub fn set_settings(&self, settings: Option<&PrintSettings>)
pub fn set_settings(&self, settings: Option<&PrintSettings>)
Sets the PrintSettings
for the PrintUnixDialog
.
Typically, this is used to restore saved print settings from a previous print operation before the print dialog is shown.
settings
sourcepub fn set_support_selection(&self, support_selection: bool)
pub fn set_support_selection(&self, support_selection: bool)
Sets whether the print dialog allows user to print a selection.
support_selection
true
to allow print selection
sourcepub fn print_settings(&self) -> Option<PrintSettings>
pub fn print_settings(&self) -> Option<PrintSettings>
The PrintSettings
object used for this dialog.
sourcepub fn set_print_settings(&self, print_settings: Option<&PrintSettings>)
pub fn set_print_settings(&self, print_settings: Option<&PrintSettings>)
The PrintSettings
object used for this dialog.
pub fn connect_current_page_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId
pub fn connect_embed_page_setup_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId
pub fn connect_has_selection_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId
pub fn connect_manual_capabilities_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId
pub fn connect_page_setup_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId
pub fn connect_print_settings_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId
pub fn connect_selected_printer_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId
pub fn connect_support_selection_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId
Trait Implementations§
source§impl Clone for PrintUnixDialog
impl Clone for PrintUnixDialog
source§impl Debug for PrintUnixDialog
impl Debug for PrintUnixDialog
source§impl Default for PrintUnixDialog
impl Default for PrintUnixDialog
source§impl Display for PrintUnixDialog
impl Display for PrintUnixDialog
source§impl HasParamSpec for PrintUnixDialog
impl HasParamSpec for PrintUnixDialog
type ParamSpec = ParamSpecObject
§type SetValue = PrintUnixDialog
type SetValue = PrintUnixDialog
type BuilderFn = fn(_: &str) -> ParamSpecObjectBuilder<'_, PrintUnixDialog>
fn param_spec_builder() -> Self::BuilderFn
source§impl Hash for PrintUnixDialog
impl Hash for PrintUnixDialog
source§impl Ord for PrintUnixDialog
impl Ord for PrintUnixDialog
source§impl ParentClassIs for PrintUnixDialog
impl ParentClassIs for PrintUnixDialog
source§impl<OT: ObjectType> PartialEq<OT> for PrintUnixDialog
impl<OT: ObjectType> PartialEq<OT> for PrintUnixDialog
source§impl<OT: ObjectType> PartialOrd<OT> for PrintUnixDialog
impl<OT: ObjectType> PartialOrd<OT> for PrintUnixDialog
1.0.0 · source§fn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
self
and other
) and is used by the <=
operator. Read moresource§impl StaticType for PrintUnixDialog
impl StaticType for PrintUnixDialog
source§fn static_type() -> Type
fn static_type() -> Type
Self
.impl Eq for PrintUnixDialog
impl IsA<Accessible> for PrintUnixDialog
impl IsA<Buildable> for PrintUnixDialog
impl IsA<ConstraintTarget> for PrintUnixDialog
impl IsA<Dialog> for PrintUnixDialog
impl IsA<Native> for PrintUnixDialog
impl IsA<Root> for PrintUnixDialog
impl IsA<ShortcutManager> for PrintUnixDialog
impl IsA<Widget> for PrintUnixDialog
impl IsA<Window> for PrintUnixDialog
Auto Trait Implementations§
impl RefUnwindSafe for PrintUnixDialog
impl !Send for PrintUnixDialog
impl !Sync for PrintUnixDialog
impl Unpin for PrintUnixDialog
impl UnwindSafe for PrintUnixDialog
Blanket Implementations§
source§impl<O> AccessibleExtManual for Owhere
O: IsA<Accessible>,
impl<O> AccessibleExtManual for Owhere O: IsA<Accessible>,
source§fn update_property(&self, properties: &[Property<'_>])
fn update_property(&self, properties: &[Property<'_>])
source§fn update_relation(&self, relations: &[Relation<'_>])
fn update_relation(&self, relations: &[Relation<'_>])
source§fn update_state(&self, states: &[State])
fn update_state(&self, states: &[State])
source§impl<T> Cast for Twhere
T: ObjectType,
impl<T> Cast for Twhere T: ObjectType,
source§fn upcast<T>(self) -> Twhere
T: ObjectType,
Self: IsA<T>,
fn upcast<T>(self) -> Twhere T: ObjectType, Self: IsA<T>,
T
. Read moresource§fn upcast_ref<T>(&self) -> &Twhere
T: ObjectType,
Self: IsA<T>,
fn upcast_ref<T>(&self) -> &Twhere T: ObjectType, Self: IsA<T>,
T
. Read moresource§fn downcast<T>(self) -> Result<T, Self>where
T: ObjectType,
Self: CanDowncast<T>,
fn downcast<T>(self) -> Result<T, Self>where T: ObjectType, Self: CanDowncast<T>,
T
. Read moresource§fn downcast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
Self: CanDowncast<T>,
fn downcast_ref<T>(&self) -> Option<&T>where T: ObjectType, Self: CanDowncast<T>,
T
. Read moresource§fn dynamic_cast<T>(self) -> Result<T, Self>where
T: ObjectType,
fn dynamic_cast<T>(self) -> Result<T, Self>where T: ObjectType,
T
. This handles upcasting, downcasting
and casting between interface and interface implementors. All checks are performed at
runtime, while upcast
will do many checks at compile-time already. downcast
will
perform the same checks at runtime as dynamic_cast
, but will also ensure some amount of
compile-time safety. Read moresource§fn dynamic_cast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
fn dynamic_cast_ref<T>(&self) -> Option<&T>where T: ObjectType,
T
. This handles upcasting, downcasting
and casting between interface and interface implementors. All checks are performed at
runtime, while downcast
and upcast
will do many checks at compile-time already. Read moresource§unsafe fn unsafe_cast<T>(self) -> Twhere
T: ObjectType,
unsafe fn unsafe_cast<T>(self) -> Twhere T: ObjectType,
T
unconditionally. Read moresource§unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere
T: ObjectType,
unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere T: ObjectType,
&T
unconditionally. Read moresource§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> IntoClosureReturnValue for Twhere
T: Into<Value>,
impl<T> IntoClosureReturnValue for Twhere T: Into<Value>,
fn into_closure_return_value(self) -> Option<Value>
source§impl<U> IsSubclassableExt for Uwhere
U: IsClass + ParentClassIs,
impl<U> IsSubclassableExt for Uwhere U: IsClass + ParentClassIs,
fn parent_class_init<T>(class: &mut Class<U>)where T: ObjectSubclass, <U as ParentClassIs>::Parent: IsSubclassable<T>,
fn parent_instance_init<T>(instance: &mut InitializingObject<T>)where T: ObjectSubclass, <U as ParentClassIs>::Parent: IsSubclassable<T>,
source§impl<T> ObjectExt for Twhere
T: ObjectType,
impl<T> ObjectExt for Twhere T: ObjectType,
source§fn is<U>(&self) -> boolwhere
U: StaticType,
fn is<U>(&self) -> boolwhere U: StaticType,
true
if the object is an instance of (can be cast to) T
.source§fn object_class(&self) -> &Class<Object>
fn object_class(&self) -> &Class<Object>
ObjectClass
of the object. Read moresource§fn class_of<U>(&self) -> Option<&Class<U>>where
U: IsClass,
fn class_of<U>(&self) -> Option<&Class<U>>where U: IsClass,
T
. Read moresource§fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where
U: IsInterface,
fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where U: IsInterface,
T
of the object. Read moresource§fn set_property_from_value(&self, property_name: &str, value: &Value)
fn set_property_from_value(&self, property_name: &str, value: &Value)
source§fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])
fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])
source§fn set_properties_from_value(&self, property_values: &[(&str, Value)])
fn set_properties_from_value(&self, property_values: &[(&str, Value)])
source§fn property<V>(&self, property_name: &str) -> Vwhere
V: for<'b> FromValue<'b> + 'static,
fn property<V>(&self, property_name: &str) -> Vwhere V: for<'b> FromValue<'b> + 'static,
property_name
of the object and cast it to the type V. Read moresource§fn property_value(&self, property_name: &str) -> Value
fn property_value(&self, property_name: &str) -> Value
property_name
of the object. Read moresource§fn property_type(&self, property_name: &str) -> Option<Type>
fn property_type(&self, property_name: &str) -> Option<Type>
property_name
of this object. Read moresource§fn find_property(&self, property_name: &str) -> Option<ParamSpec>
fn find_property(&self, property_name: &str) -> Option<ParamSpec>
ParamSpec
of the property property_name
of this object.source§fn list_properties(&self) -> PtrSlice<ParamSpec>
fn list_properties(&self) -> PtrSlice<ParamSpec>
ParamSpec
of the properties of this object.source§fn freeze_notify(&self) -> PropertyNotificationFreezeGuard
fn freeze_notify(&self) -> PropertyNotificationFreezeGuard
source§unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where
QD: 'static,
unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where QD: 'static,
key
. Read moresource§unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where
QD: 'static,
unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where QD: 'static,
key
. Read moresource§unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where
QD: 'static,
unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where QD: 'static,
key
. Read moresource§unsafe fn set_data<QD>(&self, key: &str, value: QD)where
QD: 'static,
unsafe fn set_data<QD>(&self, key: &str, value: QD)where QD: 'static,
key
. Read moresource§unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where
QD: 'static,
unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where QD: 'static,
key
. Read moresource§unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where
QD: 'static,
unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where QD: 'static,
key
. Read moresource§fn block_signal(&self, handler_id: &SignalHandlerId)
fn block_signal(&self, handler_id: &SignalHandlerId)
source§fn unblock_signal(&self, handler_id: &SignalHandlerId)
fn unblock_signal(&self, handler_id: &SignalHandlerId)
source§fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)
fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)
source§fn stop_signal_emission_by_name(&self, signal_name: &str)
fn stop_signal_emission_by_name(&self, signal_name: &str)
source§fn connect<F>(
&self,
signal_name: &str,
after: bool,
callback: F
) -> SignalHandlerIdwhere
F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,
fn connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,
signal_name
on this object. Read moresource§fn connect_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F
) -> SignalHandlerIdwhere
F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,
fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,
signal_id
on this object. Read moresource§fn connect_local<F>(
&self,
signal_name: &str,
after: bool,
callback: F
) -> SignalHandlerIdwhere
F: Fn(&[Value]) -> Option<Value> + 'static,
fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,
signal_name
on this object. Read moresource§fn connect_local_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F
) -> SignalHandlerIdwhere
F: Fn(&[Value]) -> Option<Value> + 'static,
fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,
signal_id
on this object. Read moresource§unsafe fn connect_unsafe<F>(
&self,
signal_name: &str,
after: bool,
callback: F
) -> SignalHandlerIdwhere
F: Fn(&[Value]) -> Option<Value>,
unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,
signal_name
on this object. Read moresource§unsafe fn connect_unsafe_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F
) -> SignalHandlerIdwhere
F: Fn(&[Value]) -> Option<Value>,
unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,
signal_id
on this object. Read moresource§fn connect_closure(
&self,
signal_name: &str,
after: bool,
closure: RustClosure
) -> SignalHandlerId
fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> SignalHandlerId
signal_name
on this object. Read moresource§fn connect_closure_id(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
closure: RustClosure
) -> SignalHandlerId
fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> SignalHandlerId
signal_id
on this object. Read moresource§fn watch_closure(&self, closure: &impl AsRef<Closure>)
fn watch_closure(&self, closure: &impl AsRef<Closure>)
closure
to the lifetime of the object. When
the object’s reference count drops to zero, the closure will be
invalidated. An invalidated closure will ignore any calls to
invoke_with_values
, or
invoke
when using Rust closures.source§fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere R: TryFromClosureReturnValue,
source§fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>
fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>
Self::emit
but takes Value
for the arguments.source§fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere R: TryFromClosureReturnValue,
source§fn emit_by_name_with_values(
&self,
signal_name: &str,
args: &[Value]
) -> Option<Value>
fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Option<Value>
source§fn emit_by_name_with_details<R>(
&self,
signal_name: &str,
details: Quark,
args: &[&dyn ToValue]
) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> Rwhere R: TryFromClosureReturnValue,
source§fn emit_by_name_with_details_and_values(
&self,
signal_name: &str,
details: Quark,
args: &[Value]
) -> Option<Value>
fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Option<Value>
source§fn emit_with_details<R>(
&self,
signal_id: SignalId,
details: Quark,
args: &[&dyn ToValue]
) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> Rwhere R: TryFromClosureReturnValue,
source§fn emit_with_details_and_values(
&self,
signal_id: SignalId,
details: Quark,
args: &[Value]
) -> Option<Value>
fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Option<Value>
source§fn disconnect(&self, handler_id: SignalHandlerId)
fn disconnect(&self, handler_id: SignalHandlerId)
source§fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere
F: Fn(&T, &ParamSpec) + Send + Sync + 'static,
fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec) + Send + Sync + 'static,
notify
signal of the object. Read moresource§fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere
F: Fn(&T, &ParamSpec) + 'static,
fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec) + 'static,
notify
signal of the object. Read moresource§unsafe fn connect_notify_unsafe<F>(
&self,
name: Option<&str>,
f: F
) -> SignalHandlerIdwhere
F: Fn(&T, &ParamSpec),
unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F ) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec),
notify
signal of the object. Read more