Struct gtk4::SelectionModel

source ·
#[repr(transparent)]
pub struct SelectionModel { /* private fields */ }
Expand description

SelectionModel is an interface that add support for selection to list models.

This support is then used by widgets using list models to add the ability to select and unselect various items.

GTK provides default implementations of the most common selection modes such as SingleSelection, so you will only need to implement this interface if you want detailed control about how selections should be handled.

A SelectionModel supports a single boolean per item indicating if an item is selected or not. This can be queried via SelectionModelExt::is_selected(). When the selected state of one or more items changes, the model will emit the selection-changed signal by calling the SelectionModelExt::selection_changed() function. The positions given in that signal may have their selection state changed, though that is not a requirement. If new items added to the model via the items-changed signal are selected or not is up to the implementation.

Note that items added via items-changed may already be selected and no selection-changed will be emitted for them. So to track which items are selected, it is necessary to listen to both signals.

Additionally, the interface can expose functionality to select and unselect items. If these functions are implemented, GTK’s list widgets will allow users to select and unselect items. However, SelectionModels are free to only implement them partially or not at all. In that case the widgets will not support the unimplemented operations.

When selecting or unselecting is supported by a model, the return values of the selection functions do not indicate if selection or unselection happened. They are only meant to indicate complete failure, like when this mode of selecting is not supported by the model.

Selections may happen asynchronously, so the only reliable way to find out when an item was selected is to listen to the signals that indicate selection.

Signals

selection-changed

Emitted when the selection state of some of the items in @model changes.

Note that this signal does not specify the new selection state of the items, they need to be queried manually. It is also not necessary for a model to change the selection state of any of the items in the selection model, though it would be rather useless to emit such a signal.

ListModel

items-changed

This signal is emitted whenever items were added to or removed from @list. At @position, @removed items were removed and @added items were added in their place.

Note: If removed != added, the positions of all later items in the model change.

Implements

SelectionModelExt, gio::prelude::ListModelExt

Implementations§

source§

impl SelectionModel

source

pub const NONE: Option<&'static SelectionModel> = None

Trait Implementations§

source§

impl Clone for SelectionModel

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for SelectionModel

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Display for SelectionModel

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl HasParamSpec for SelectionModel

§

type ParamSpec = ParamSpecObject

§

type SetValue = SelectionModel

Preferred value to be used as setter for the associated ParamSpec.
§

type BuilderFn = fn(_: &str) -> ParamSpecObjectBuilder<'_, SelectionModel>

source§

fn param_spec_builder() -> Self::BuilderFn

source§

impl Hash for SelectionModel

source§

fn hash<H>(&self, state: &mut H)where H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl<T: SelectionModelImpl> IsImplementable<T> for SelectionModel

source§

fn interface_init(iface: &mut Interface<Self>)

Override the virtual methods of this interface for the given subclass and do other interface initialization. Read more
source§

fn instance_init(_instance: &mut InitializingObject<T>)

Instance specific initialization. Read more
source§

impl Ord for SelectionModel

source§

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl<OT: ObjectType> PartialEq<OT> for SelectionModel

source§

fn eq(&self, other: &OT) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<OT: ObjectType> PartialOrd<OT> for SelectionModel

source§

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for SelectionModel

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl Eq for SelectionModel

source§

impl IsA<ListModel> for SelectionModel

source§

impl IsA<SelectionModel> for MultiSelection

source§

impl IsA<SelectionModel> for NoSelection

source§

impl IsA<SelectionModel> for SingleSelection

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Cast for Twhere T: ObjectType,

source§

fn upcast<T>(self) -> Twhere T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more
source§

fn upcast_ref<T>(&self) -> &Twhere T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more
source§

fn downcast<T>(self) -> Result<T, Self>where T: ObjectType, Self: CanDowncast<T>,

Tries to downcast to a subclass or interface implementor T. Read more
source§

fn downcast_ref<T>(&self) -> Option<&T>where T: ObjectType, Self: CanDowncast<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more
source§

fn dynamic_cast<T>(self) -> Result<T, Self>where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more
source§

fn dynamic_cast_ref<T>(&self) -> Option<&T>where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
source§

unsafe fn unsafe_cast<T>(self) -> Twhere T: ObjectType,

Casts to T unconditionally. Read more
source§

unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere T: ObjectType,

Casts to &T unconditionally. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoClosureReturnValue for Twhere T: Into<Value>,

source§

impl<O> ListModelExt for Owhere O: IsA<ListModel>,

source§

fn item_type(&self) -> Type

source§

fn n_items(&self) -> u32

source§

fn item(&self, position: u32) -> Option<Object>

source§

fn items_changed(&self, position: u32, removed: u32, added: u32)

source§

fn connect_items_changed<F>(&self, f: F) -> SignalHandlerIdwhere F: Fn(&O, u32, u32, u32) + 'static,

source§

impl<T> ListModelExtManual for Twhere T: IsA<ListModel>,

source§

fn snapshot(&self) -> Vec<Object, Global>

Get an immutable snapshot of the container inside the ListModel. Any modification done to the returned container Vec will not be reflected on the ListModel.
source§

fn iter<LT>(&self) -> ListModelIter<'_, LT>where LT: IsA<Object>,

If T::static_type().is_a(self.item_type()) then it returns an iterator over the ListModel elements, else the types are not compatible and returns an Err(...). Read more
source§

impl<T> ObjectExt for Twhere T: ObjectType,

source§

fn is<U>(&self) -> boolwhere U: StaticType,

Returns true if the object is an instance of (can be cast to) T.
source§

fn type_(&self) -> Type

Returns the type of the object.
source§

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more
source§

fn class(&self) -> &Class<T>where T: IsClass,

Returns the class of the object.
source§

fn class_of<U>(&self) -> Option<&Class<U>>where U: IsClass,

Returns the class of the object in the given type T. Read more
source§

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where U: IsInterface,

Returns the interface T of the object. Read more
source§

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more
source§

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more
source§

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more
source§

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more
source§

fn property<V>(&self, property_name: &str) -> Vwhere V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more
source§

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more
source§

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_. Read more
source§

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more
source§

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.
source§

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.
source§

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more
source§

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn set_data<QD>(&self, key: &str, value: QD)where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more
source§

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.
source§

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.
source§

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.
source§

fn connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more
source§

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more
source§

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more
source§

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more
source§

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more
source§

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more
source§

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.
source§

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by signal id. Read more
source§

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.
source§

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by its name. Read more
source§

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Option<Value>

Emit signal by its name. Read more
source§

fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by its name with details. Read more
source§

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by its name with details. Read more
source§

fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by signal id with details. Read more
source§

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by signal id with details. Read more
source§

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.
source§

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec) + Send + Sync + 'static,

Connect to the notify signal of the object. Read more
source§

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec) + 'static,

Connect to the notify signal of the object. Read more
source§

unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F ) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec),

Connect to the notify signal of the object. Read more
source§

fn notify(&self, property_name: &str)

Notify that the given property has changed its value. Read more
source§

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value. Read more
source§

fn downgrade(&self) -> WeakRef<T>

Downgrade this object to a weak reference.
source§

fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>where F: FnOnce() + Send + 'static,

Add a callback to be notified when the Object is disposed.
source§

fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>where F: FnOnce() + 'static,

Add a callback to be notified when the Object is disposed. Read more
source§

fn bind_property<'f, 't, O, 'a>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str ) -> BindingBuilder<'a, 'f, 't>where O: ObjectType,

Bind property source_property on this object to the target_property on the target object. Read more
source§

fn ref_count(&self) -> u32

Returns the strong reference count of this object.
source§

unsafe fn run_dispose(&self)

Runs the dispose mechanism of the object. Read more
source§

impl<T> Property for Twhere T: HasParamSpec,

§

type Value = T

source§

impl<T> PropertyGet for Twhere T: HasParamSpec,

§

type Value = T

source§

fn get<R, F>(&self, f: F) -> Rwhere F: Fn(&<T as PropertyGet>::Value) -> R,

source§

impl<T> StaticTypeExt for Twhere T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T> TransparentType for Twhere T: TransparentPtrType,

source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for Twhere T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<Super, Sub> CanDowncast<Sub> for Superwhere Super: IsA<Super>, Sub: IsA<Super>,

source§

impl<'a, T, C, E> FromValueOptional<'a> for Twhere T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,