#[repr(transparent)]
pub struct SignalListItemFactory { /* private fields */ }
Expand description

SignalListItemFactory is a ListItemFactory that emits signals to to manage listitems.

Signals are emitted for every listitem in the same order:

  1. setup is emitted to set up permanent things on the listitem. This usually means constructing the widgets used in the row and adding them to the listitem.

  2. bind is emitted to bind the item passed via item to the widgets that have been created in step 1 or to add item-specific widgets. Signals are connected to listen to changes - both to changes in the item to update the widgets or to changes in the widgets to update the item. After this signal has been called, the listitem may be shown in a list widget.

  3. unbind is emitted to undo everything done in step 2. Usually this means disconnecting signal handlers. Once this signal has been called, the listitem will no longer be used in a list widget.

  4. bind and unbind may be emitted multiple times again to bind the listitem for use with new items. By reusing listitems, potentially costly setup can be avoided. However, it means code needs to make sure to properly clean up the listitem in step 3 so that no information from the previous use leaks into the next use.

  5. teardown is emitted to allow undoing the effects of setup. After this signal was emitted on a listitem, the listitem will be destroyed and not be used again.

Note that during the signal emissions, changing properties on the ListItems passed will not trigger notify signals as the listitem’s notifications are frozen. See g_object_freeze_notify() for details.

For tracking changes in other properties in the ListItem, the ::notify signal is recommended. The signal can be connected in the setup signal and removed again during teardown.

Signals

bind

Emitted when an object has been bound, for example when a new item has been set on a ListItem and should be bound for use.

After this signal was emitted, the object might be shown in a ListView or other widget.

The unbind signal is the opposite of this signal and can be used to undo everything done in this signal.

setup

Emitted when a new listitem has been created and needs to be setup for use.

It is the first signal emitted for every listitem.

The teardown signal is the opposite of this signal and can be used to undo everything done in this signal.

teardown

Emitted when an object is about to be destroyed.

It is the last signal ever emitted for this @object.

This signal is the opposite of the setup signal and should be used to undo everything done in that signal.

unbind

Emitted when a object has been unbound from its item, for example when a listitem was removed from use in a list widget and its new item is about to be unset.

This signal is the opposite of the bind signal and should be used to undo everything done in that signal.

Implements

[ListItemFactoryExt][trait@crate::prelude::ListItemFactoryExt], glib::ObjectExt

Implementations§

source§

impl SignalListItemFactory

source

pub fn new() -> SignalListItemFactory

Creates a new SignalListItemFactory.

You need to connect signal handlers before you use it.

Returns

a new SignalListItemFactory

source

pub fn connect_bind<F: Fn(&Self, &Object) + 'static>( &self, f: F ) -> SignalHandlerId

Available on crate feature v4_8 only.

Emitted when an object has been bound, for example when a new item has been set on a ListItem and should be bound for use.

After this signal was emitted, the object might be shown in a ListView or other widget.

The unbind signal is the opposite of this signal and can be used to undo everything done in this signal.

object

The GObject to bind

source

pub fn connect_setup<F: Fn(&Self, &Object) + 'static>( &self, f: F ) -> SignalHandlerId

Available on crate feature v4_8 only.

Emitted when a new listitem has been created and needs to be setup for use.

It is the first signal emitted for every listitem.

The teardown signal is the opposite of this signal and can be used to undo everything done in this signal.

object

The GObject to set up

source

pub fn connect_teardown<F: Fn(&Self, &Object) + 'static>( &self, f: F ) -> SignalHandlerId

Available on crate feature v4_8 only.

Emitted when an object is about to be destroyed.

It is the last signal ever emitted for this @object.

This signal is the opposite of the setup signal and should be used to undo everything done in that signal.

object

The GObject to tear down

source

pub fn connect_unbind<F: Fn(&Self, &Object) + 'static>( &self, f: F ) -> SignalHandlerId

Available on crate feature v4_8 only.

Emitted when a object has been unbound from its item, for example when a listitem was removed from use in a list widget and its new item is about to be unset.

This signal is the opposite of the bind signal and should be used to undo everything done in that signal.

object

The GObject to unbind

Trait Implementations§

source§

impl Clone for SignalListItemFactory

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for SignalListItemFactory

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for SignalListItemFactory

source§

fn default() -> Self

Returns the “default value” for a type. Read more
source§

impl Display for SignalListItemFactory

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl HasParamSpec for SignalListItemFactory

§

type ParamSpec = ParamSpecObject

§

type SetValue = SignalListItemFactory

Preferred value to be used as setter for the associated ParamSpec.
§

type BuilderFn = fn(_: &str) -> ParamSpecObjectBuilder<'_, SignalListItemFactory>

source§

fn param_spec_builder() -> Self::BuilderFn

source§

impl Hash for SignalListItemFactory

source§

fn hash<H>(&self, state: &mut H)where H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for SignalListItemFactory

source§

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl ParentClassIs for SignalListItemFactory

source§

impl<OT: ObjectType> PartialEq<OT> for SignalListItemFactory

source§

fn eq(&self, other: &OT) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<OT: ObjectType> PartialOrd<OT> for SignalListItemFactory

source§

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for SignalListItemFactory

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl Eq for SignalListItemFactory

source§

impl IsA<ListItemFactory> for SignalListItemFactory

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Cast for Twhere T: ObjectType,

source§

fn upcast<T>(self) -> Twhere T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more
source§

fn upcast_ref<T>(&self) -> &Twhere T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more
source§

fn downcast<T>(self) -> Result<T, Self>where T: ObjectType, Self: CanDowncast<T>,

Tries to downcast to a subclass or interface implementor T. Read more
source§

fn downcast_ref<T>(&self) -> Option<&T>where T: ObjectType, Self: CanDowncast<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more
source§

fn dynamic_cast<T>(self) -> Result<T, Self>where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more
source§

fn dynamic_cast_ref<T>(&self) -> Option<&T>where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
source§

unsafe fn unsafe_cast<T>(self) -> Twhere T: ObjectType,

Casts to T unconditionally. Read more
source§

unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere T: ObjectType,

Casts to &T unconditionally. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoClosureReturnValue for Twhere T: Into<Value>,

source§

impl<U> IsSubclassableExt for Uwhere U: IsClass + ParentClassIs,

source§

impl<T> ObjectExt for Twhere T: ObjectType,

source§

fn is<U>(&self) -> boolwhere U: StaticType,

Returns true if the object is an instance of (can be cast to) T.
source§

fn type_(&self) -> Type

Returns the type of the object.
source§

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more
source§

fn class(&self) -> &Class<T>where T: IsClass,

Returns the class of the object.
source§

fn class_of<U>(&self) -> Option<&Class<U>>where U: IsClass,

Returns the class of the object in the given type T. Read more
source§

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where U: IsInterface,

Returns the interface T of the object. Read more
source§

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more
source§

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more
source§

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more
source§

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more
source§

fn property<V>(&self, property_name: &str) -> Vwhere V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more
source§

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more
source§

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_. Read more
source§

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more
source§

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.
source§

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.
source§

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more
source§

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn set_data<QD>(&self, key: &str, value: QD)where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more
source§

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.
source§

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.
source§

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.
source§

fn connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more
source§

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more
source§

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more
source§

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerIdwhere F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more
source§

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more
source§

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more
source§

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.
source§

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by signal id. Read more
source§

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.
source§

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by its name. Read more
source§

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Option<Value>

Emit signal by its name. Read more
source§

fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by its name with details. Read more
source§

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by its name with details. Read more
source§

fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> Rwhere R: TryFromClosureReturnValue,

Emit signal by signal id with details. Read more
source§

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by signal id with details. Read more
source§

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.
source§

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec) + Send + Sync + 'static,

Connect to the notify signal of the object. Read more
source§

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec) + 'static,

Connect to the notify signal of the object. Read more
source§

unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F ) -> SignalHandlerIdwhere F: Fn(&T, &ParamSpec),

Connect to the notify signal of the object. Read more
source§

fn notify(&self, property_name: &str)

Notify that the given property has changed its value. Read more
source§

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value. Read more
source§

fn downgrade(&self) -> WeakRef<T>

Downgrade this object to a weak reference.
source§

fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>where F: FnOnce() + Send + 'static,

Add a callback to be notified when the Object is disposed.
source§

fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>where F: FnOnce() + 'static,

Add a callback to be notified when the Object is disposed. Read more
source§

fn bind_property<'f, 't, O, 'a>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str ) -> BindingBuilder<'a, 'f, 't>where O: ObjectType,

Bind property source_property on this object to the target_property on the target object. Read more
source§

fn ref_count(&self) -> u32

Returns the strong reference count of this object.
source§

unsafe fn run_dispose(&self)

Runs the dispose mechanism of the object. Read more
source§

impl<T> Property for Twhere T: HasParamSpec,

§

type Value = T

source§

impl<T> PropertyGet for Twhere T: HasParamSpec,

§

type Value = T

source§

fn get<R, F>(&self, f: F) -> Rwhere F: Fn(&<T as PropertyGet>::Value) -> R,

source§

impl<T> StaticTypeExt for Twhere T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T> TransparentType for Twhere T: TransparentPtrType,

source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for Twhere T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<Super, Sub> CanDowncast<Sub> for Superwhere Super: IsA<Super>, Sub: IsA<Super>,

source§

impl<'a, T, C, E> FromValueOptional<'a> for Twhere T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,