Struct gdk4::PopupLayout

source ·
#[repr(transparent)]
pub struct PopupLayout { /* private fields */ }
Expand description

The PopupLayout struct contains information that is necessary position a Popup relative to its parent.

The positioning requires a negotiation with the windowing system, since it depends on external constraints, such as the position of the parent surface, and the screen dimensions.

The basic ingredients are a rectangle on the parent surface, and the anchor on both that rectangle and the popup. The anchors specify a side or corner to place next to each other.

Popup anchors

For cases where placing the anchors next to each other would make the popup extend offscreen, the layout includes some hints for how to resolve this problem. The hints may suggest to flip the anchor position to the other side, or to ‘slide’ the popup along a side, or to resize it.

Flipping popups

Sliding popups

These hints may be combined.

Ultimatively, it is up to the windowing system to determine the position and size of the popup. You can learn about the result by calling PopupExt::position_x(), PopupExt::position_y(), PopupExt::rect_anchor() and PopupExt::surface_anchor() after the popup has been presented. This can be used to adjust the rendering. For example, Gtk::Popover changes its arrow position accordingly. But you have to be careful avoid changing the size of the popover, or it has to be presented again.

Implementations§

source§

impl PopupLayout

source

pub fn as_ptr(&self) -> *mut GdkPopupLayout

Return the inner pointer to the underlying C value.

source

pub unsafe fn from_glib_ptr_borrow<'a>( ptr: *const *const GdkPopupLayout ) -> &'a Self

Borrows the underlying C value.

source§

impl PopupLayout

source

pub fn new( anchor_rect: &Rectangle, rect_anchor: Gravity, surface_anchor: Gravity ) -> PopupLayout

Create a popup layout description.

Used together with PopupExt::present() to describe how a popup surface should be placed and behave on-screen.

@anchor_rect is relative to the top-left corner of the surface’s parent. @rect_anchor and @surface_anchor determine anchor points on @anchor_rect and surface to pin together.

The position of @anchor_rect’s anchor point can optionally be offset using set_offset(), which is equivalent to offsetting the position of surface.

anchor_rect

the anchor Rectangle to align @surface with

rect_anchor

the point on @anchor_rect to align with @surface’s anchor point

surface_anchor

the point on @surface to align with @rect’s anchor point

Returns

newly created instance of PopupLayout

source

pub fn copy(&self) -> PopupLayout

source

pub fn anchor_hints(&self) -> AnchorHints

source

pub fn anchor_rect(&self) -> Rectangle

Get the anchor rectangle.

Returns

The anchor rectangle

source

pub fn rect_anchor(&self) -> Gravity

Returns the anchor position on the anchor rectangle.

Returns

the anchor on the anchor rectangle.

source

pub fn shadow_width(&self) -> (i32, i32, i32, i32)

Available on crate feature v4_2 only.

Obtains the shadow widths of this layout.

Returns
left

return location for the left shadow width

return location for the right shadow width

top

return location for the top shadow width

bottom

return location for the bottom shadow width

source

pub fn surface_anchor(&self) -> Gravity

Returns the anchor position on the popup surface.

Returns

the anchor on the popup surface.

source

pub fn set_anchor_hints(&self, anchor_hints: AnchorHints)

Set new anchor hints.

The set @anchor_hints determines how @surface will be moved if the anchor points cause it to move off-screen. For example, AnchorHints::FLIP_X will replace Gravity::NorthWest with Gravity::NorthEast and vice versa if @surface extends beyond the left or right edges of the monitor.

anchor_hints

the new AnchorHints

source

pub fn set_anchor_rect(&self, anchor_rect: &Rectangle)

Set the anchor rectangle.

anchor_rect

the new anchor rectangle

source

pub fn set_offset(&self, dx: i32, dy: i32)

Offset the position of the anchor rectangle with the given delta.

dx

x delta to offset the anchor rectangle with

dy

y delta to offset the anchor rectangle with

source

pub fn set_rect_anchor(&self, anchor: Gravity)

Set the anchor on the anchor rectangle.

anchor

the new rect anchor

source

pub fn set_shadow_width(&self, left: i32, right: i32, top: i32, bottom: i32)

Available on crate feature v4_2 only.

Sets the shadow width of the popup.

The shadow width corresponds to the part of the computed surface size that would consist of the shadow margin surrounding the window, would there be any.

left

width of the left part of the shadow

right

width of the right part of the shadow

top

height of the top part of the shadow

bottom

height of the bottom part of the shadow

source

pub fn set_surface_anchor(&self, anchor: Gravity)

Set the anchor on the popup surface.

anchor

the new popup surface anchor

source§

impl PopupLayout

source

pub fn offset(&self) -> (i32, i32)

Retrieves the offset for the anchor rectangle.

Returns
dx

return location for the delta X coordinate

dy

return location for the delta Y coordinate

Trait Implementations§

source§

impl Clone for PopupLayout

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for PopupLayout

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl From<PopupLayout> for Value

source§

fn from(s: PopupLayout) -> Self

Converts to this type from the input type.
source§

impl HasParamSpec for PopupLayout

§

type ParamSpec = ParamSpecBoxed

§

type SetValue = PopupLayout

Preferred value to be used as setter for the associated ParamSpec.
§

type BuilderFn = fn(_: &str) -> ParamSpecBoxedBuilder<'_, PopupLayout>

source§

fn param_spec_builder() -> Self::BuilderFn

source§

impl Hash for PopupLayout

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for PopupLayout

source§

fn cmp(&self, other: &PopupLayout) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl PartialEq<PopupLayout> for PopupLayout

source§

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd<PopupLayout> for PopupLayout

source§

fn partial_cmp(&self, other: &PopupLayout) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for PopupLayout

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl Eq for PopupLayout

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *const GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( _: *const GSList, _: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

unsafe fn from_glib_full_num_as_vec( ptr: *mut GSList, num: usize ) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T, Global>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T, Global>

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoClosureReturnValue for Twhere T: Into<Value>,

source§

impl<T> Property for Twhere T: HasParamSpec,

§

type Value = T

source§

impl<T> PropertyGet for Twhere T: HasParamSpec,

§

type Value = T

source§

fn get<R, F>(&self, f: F) -> Rwhere F: Fn(&<T as PropertyGet>::Value) -> R,

source§

impl<T> StaticTypeExt for Twhere T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> TransparentType for Twhere T: TransparentPtrType,

source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for Twhere T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<'a, T, C, E> FromValueOptional<'a> for Twhere T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,