gtk4

Struct GestureDrag

Source
pub struct GestureDrag { /* private fields */ }
Expand description

GestureDrag is a Gesture implementation for drags.

The drag operation itself can be tracked throughout the drag-begin, drag-update and drag-end signals, and the relevant coordinates can be extracted through GestureDragExt::offset() and GestureDragExt::start_point().

§Signals

§drag-begin

Emitted whenever dragging starts.

§drag-end

Emitted whenever the dragging is finished.

§drag-update

Emitted whenever the dragging point moves.

Gesture

§begin

Emitted when the gesture is recognized.

This means the number of touch sequences matches n-points.

Note: These conditions may also happen when an extra touch (eg. a third touch on a 2-touches gesture) is lifted, in that situation @sequence won’t pertain to the current set of active touches, so don’t rely on this being true.

§cancel

Emitted whenever a sequence is cancelled.

This usually happens on active touches when EventControllerExt::reset() is called on @gesture (manually, due to grabs…), or the individual @sequence was claimed by parent widgets’ controllers (see GestureExt::set_sequence_state()).

@gesture must forget everything about @sequence as in response to this signal.

§end

Emitted when @gesture either stopped recognizing the event sequences as something to be handled, or the number of touch sequences became higher or lower than n-points.

Note: @sequence might not pertain to the group of sequences that were previously triggering recognition on @gesture (ie. a just pressed touch sequence that exceeds n-points). This situation may be detected by checking through GestureExt::handles_sequence().

§sequence-state-changed

Emitted whenever a sequence state changes.

See GestureExt::set_sequence_state() to know more about the expectable sequence lifetimes.

§update

Emitted whenever an event is handled while the gesture is recognized.

@sequence is guaranteed to pertain to the set of active touches.

§Implements

GestureDragExt, GestureSingleExt, GestureExt, EventControllerExt, [trait@glib::ObjectExt]

GLib type: GObject with reference counted clone semantics.

Implementations§

Source§

impl GestureDrag

Source

pub const NONE: Option<&'static GestureDrag> = None

Source

pub fn new() -> GestureDrag

Returns a newly created Gesture that recognizes drags.

§Returns

a newly created GestureDrag

Source

pub fn builder() -> GestureDragBuilder

Creates a new builder-pattern struct instance to construct GestureDrag objects.

This method returns an instance of GestureDragBuilder which can be used to create GestureDrag objects.

Trait Implementations§

Source§

impl Clone for GestureDrag

Source§

fn clone(&self) -> Self

Makes a clone of this shared reference.

This increments the strong reference count of the object. Dropping the object will decrement it again.

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for GestureDrag

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for GestureDrag

Source§

fn default() -> Self

Returns the “default value” for a type. Read more
Source§

impl HasParamSpec for GestureDrag

Source§

type ParamSpec = ParamSpecObject

Source§

type SetValue = GestureDrag

Preferred value to be used as setter for the associated ParamSpec.
Source§

type BuilderFn = fn(_: &str) -> ParamSpecObjectBuilder<'_, GestureDrag>

Source§

fn param_spec_builder() -> Self::BuilderFn

Source§

impl Hash for GestureDrag

Source§

fn hash<H>(&self, state: &mut H)
where H: Hasher,

Hashes the memory address of this object.

1.3.0 · Source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
Source§

impl Ord for GestureDrag

Source§

fn cmp(&self, other: &Self) -> Ordering

Comparison for two GObjects.

Compares the memory addresses of the provided objects.

1.21.0 · Source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · Source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · Source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized,

Restrict a value to a certain interval. Read more
Source§

impl ParentClassIs for GestureDrag

Source§

impl<OT: ObjectType> PartialEq<OT> for GestureDrag

Source§

fn eq(&self, other: &OT) -> bool

Equality for two GObjects.

Two GObjects are equal if their memory addresses are equal.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl<OT: ObjectType> PartialOrd<OT> for GestureDrag

Source§

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

Partial comparison for two GObjects.

Compares the memory addresses of the provided objects.

1.0.0 · Source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · Source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · Source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · Source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
Source§

impl StaticType for GestureDrag

Source§

fn static_type() -> Type

Returns the type identifier of Self.
Source§

impl Eq for GestureDrag

Source§

impl IsA<EventController> for GestureDrag

Source§

impl IsA<Gesture> for GestureDrag

Source§

impl IsA<GestureDrag> for GesturePan

Source§

impl IsA<GestureSingle> for GestureDrag

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> Cast for T
where T: ObjectType,

Source§

fn upcast<T>(self) -> T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more
Source§

fn upcast_ref<T>(&self) -> &T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more
Source§

fn downcast<T>(self) -> Result<T, Self>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a subclass or interface implementor T. Read more
Source§

fn downcast_ref<T>(&self) -> Option<&T>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more
Source§

fn dynamic_cast<T>(self) -> Result<T, Self>
where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more
Source§

fn dynamic_cast_ref<T>(&self) -> Option<&T>
where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
Source§

unsafe fn unsafe_cast<T>(self) -> T
where T: ObjectType,

Casts to T unconditionally. Read more
Source§

unsafe fn unsafe_cast_ref<T>(&self) -> &T
where T: ObjectType,

Casts to &T unconditionally. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<O> EventControllerExt for O
where O: IsA<EventController>,

Source§

fn current_event(&self) -> Option<Event>

Returns the event that is currently being handled by the controller. Read more
Source§

fn current_event_device(&self) -> Option<Device>

Returns the device of the event that is currently being handled by the controller. Read more
Source§

fn current_event_state(&self) -> ModifierType

Returns the modifier state of the event that is currently being handled by the controller. Read more
Source§

fn current_event_time(&self) -> u32

Returns the timestamp of the event that is currently being handled by the controller. Read more
Source§

fn name(&self) -> Option<GString>

Gets the name of @self. Read more
Source§

fn propagation_limit(&self) -> PropagationLimit

Gets the propagation limit of the event controller. Read more
Source§

fn propagation_phase(&self) -> PropagationPhase

Gets the propagation phase at which @self handles events. Read more
Source§

fn widget(&self) -> Option<Widget>

Returns the Widget this controller relates to. Read more
Source§

fn reset(&self)

Resets the @self to a clean state.
Source§

fn set_name(&self, name: Option<&str>)

Sets a name on the controller that can be used for debugging. Read more
Source§

fn set_propagation_limit(&self, limit: PropagationLimit)

Sets the event propagation limit on the event controller. Read more
Source§

fn set_propagation_phase(&self, phase: PropagationPhase)

Sets the propagation phase at which a controller handles events. Read more
Source§

fn set_static_name(&self, name: Option<&str>)

Available on crate feature v4_8 only.
Sets a name on the controller that can be used for debugging. Read more
Source§

fn connect_name_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId

Source§

fn connect_propagation_limit_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Source§

fn connect_propagation_phase_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Source§

fn connect_widget_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(_: *const GList, _: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(_: *const GList, _: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GPtrArray, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize, ) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(_: *const GPtrArray, _: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GSList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize, ) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T

Source§

unsafe fn from_glib_none_as_vec(ptr: *const GList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(_: *const GList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(_: *const GList) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T

Source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T

Source§

unsafe fn from_glib_none_as_vec(ptr: *const GSList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(_: *const GSList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(_: *const GSList) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T

Source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T

Source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T

Source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T>

Source§

impl<O> GObjectPropertyExpressionExt for O
where O: IsA<Object>,

Source§

fn property_expression(&self, property_name: &str) -> PropertyExpression

Create an expression looking up an object’s property.
Source§

fn property_expression_weak(&self, property_name: &str) -> PropertyExpression

Create an expression looking up an object’s property with a weak reference.
Source§

fn this_expression(property_name: &str) -> PropertyExpression

Create an expression looking up a property in the bound this object.
Source§

impl<O> GestureDragExt for O
where O: IsA<GestureDrag>,

Source§

fn offset(&self) -> Option<(f64, f64)>

Gets the offset from the start point. Read more
Source§

fn start_point(&self) -> Option<(f64, f64)>

Gets the point where the drag started. Read more
Source§

fn connect_drag_begin<F: Fn(&Self, f64, f64) + 'static>( &self, f: F, ) -> SignalHandlerId

Emitted whenever dragging starts. Read more
Source§

fn connect_drag_end<F: Fn(&Self, f64, f64) + 'static>( &self, f: F, ) -> SignalHandlerId

Emitted whenever the dragging is finished. Read more
Source§

fn connect_drag_update<F: Fn(&Self, f64, f64) + 'static>( &self, f: F, ) -> SignalHandlerId

Emitted whenever the dragging point moves. Read more
Source§

impl<O> GestureExt for O
where O: IsA<Gesture>,

Source§

fn bounding_box(&self) -> Option<Rectangle>

If there are touch sequences being currently handled by @self, returns true and fills in @rect with the bounding box containing all active touches. Read more
Source§

fn bounding_box_center(&self) -> Option<(f64, f64)>

If there are touch sequences being currently handled by @self, returns true and fills in @x and @y with the center of the bounding box containing all active touches. Read more
Source§

fn device(&self) -> Option<Device>

Returns the logical gdk::Device that is currently operating on @self. Read more
Source§

fn group(&self) -> Vec<Gesture>

Returns all gestures in the group of @self Read more
Source§

fn last_event(&self, sequence: Option<&EventSequence>) -> Option<Event>

Returns the last event that was processed for @sequence. Read more
Source§

fn last_updated_sequence(&self) -> Option<EventSequence>

Returns the gdk::EventSequence that was last updated on @self. Read more
Source§

fn point(&self, sequence: Option<&EventSequence>) -> Option<(f64, f64)>

If @sequence is currently being interpreted by @self, returns true and fills in @x and @y with the last coordinates stored for that event sequence. Read more
Source§

fn sequence_state(&self, sequence: &EventSequence) -> EventSequenceState

Returns the @sequence state, as seen by @self. Read more
Source§

fn sequences(&self) -> Vec<EventSequence>

Returns the list of GdkEventSequences currently being interpreted by @self. Read more
Source§

fn group_with(&self, gesture: &impl IsA<Gesture>)

Adds @gesture to the same group than @self. Read more
Source§

fn handles_sequence(&self, sequence: Option<&EventSequence>) -> bool

Returns true if @self is currently handling events corresponding to @sequence. Read more
Source§

fn is_active(&self) -> bool

Returns true if the gesture is currently active. Read more
Source§

fn is_grouped_with(&self, other: &impl IsA<Gesture>) -> bool

Returns true if both gestures pertain to the same group. Read more
Source§

fn is_recognized(&self) -> bool

Returns true if the gesture is currently recognized. Read more
Source§

fn set_sequence_state( &self, sequence: &EventSequence, state: EventSequenceState, ) -> bool

👎Deprecated: Since 4.10
Sets the state of @sequence in @self. Read more
Source§

fn set_state(&self, state: EventSequenceState) -> bool

Sets the state of all sequences that @self is currently interacting with. Read more
Source§

fn ungroup(&self)

Separates @self into an isolated group.
Source§

fn n_points(&self) -> u32

The number of touch points that trigger recognition on this gesture.
Source§

fn connect_begin<F: Fn(&Self, Option<&EventSequence>) + 'static>( &self, f: F, ) -> SignalHandlerId

Emitted when the gesture is recognized. Read more
Source§

fn connect_cancel<F: Fn(&Self, Option<&EventSequence>) + 'static>( &self, f: F, ) -> SignalHandlerId

Emitted whenever a sequence is cancelled. Read more
Source§

fn connect_end<F: Fn(&Self, Option<&EventSequence>) + 'static>( &self, f: F, ) -> SignalHandlerId

Emitted when @gesture either stopped recognizing the event sequences as something to be handled, or the number of touch sequences became higher or lower than n-points. Read more
Source§

fn connect_sequence_state_changed<F: Fn(&Self, Option<&EventSequence>, EventSequenceState) + 'static>( &self, f: F, ) -> SignalHandlerId

Emitted whenever a sequence state changes. Read more
Source§

fn connect_update<F: Fn(&Self, Option<&EventSequence>) + 'static>( &self, f: F, ) -> SignalHandlerId

Emitted whenever an event is handled while the gesture is recognized. Read more
Source§

impl<O> GestureSingleExt for O
where O: IsA<GestureSingle>,

Source§

fn button(&self) -> u32

Returns the button number @self listens for. Read more
Source§

fn current_button(&self) -> u32

Returns the button number currently interacting with @self, or 0 if there is none. Read more
Source§

fn current_sequence(&self) -> Option<EventSequence>

Returns the event sequence currently interacting with @self. Read more
Source§

fn is_exclusive(&self) -> bool

Gets whether a gesture is exclusive. Read more
Source§

fn is_touch_only(&self) -> bool

Returns true if the gesture is only triggered by touch events. Read more
Source§

fn set_button(&self, button: u32)

Sets the button number @self listens to. Read more
Source§

fn set_exclusive(&self, exclusive: bool)

Sets whether @self is exclusive. Read more
Source§

fn set_touch_only(&self, touch_only: bool)

Sets whether to handle only touch events. Read more
Source§

fn connect_button_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId

Source§

fn connect_exclusive_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Source§

fn connect_touch_only_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoClosureReturnValue for T
where T: Into<Value>,

Source§

impl<U> IsSubclassableExt for U

Source§

impl<T> ObjectExt for T
where T: ObjectType,

Source§

fn is<U>(&self) -> bool
where U: StaticType,

Returns true if the object is an instance of (can be cast to) T.
Source§

fn type_(&self) -> Type

Returns the type of the object.
Source§

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more
Source§

fn class(&self) -> &Class<T>
where T: IsClass,

Returns the class of the object.
Source§

fn class_of<U>(&self) -> Option<&Class<U>>
where U: IsClass,

Returns the class of the object in the given type T. Read more
Source§

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>
where U: IsInterface,

Returns the interface T of the object. Read more
Source§

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more
Source§

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more
Source§

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more
Source§

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more
Source§

fn property<V>(&self, property_name: &str) -> V
where V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more
Source§

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more
Source§

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_. Read more
Source§

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more
Source§

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.
Source§

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.
Source§

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more
Source§

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
Source§

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
Source§

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
Source§

unsafe fn set_data<QD>(&self, key: &str, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
Source§

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
Source§

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
Source§

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more
Source§

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.
Source§

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.
Source§

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.
Source§

fn connect<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more
Source§

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more
Source§

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more
Source§

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more
Source§

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more
Source§

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more
Source§

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure, ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more
Source§

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure, ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more
Source§

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.
Source§

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> R

Emit signal by signal id. Read more
Source§

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.
Source§

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> R

Emit signal by its name. Read more
Source§

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value], ) -> Option<Value>

Emit signal by its name. Read more
Source§

fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue], ) -> R

Emit signal by its name with details. Read more
Source§

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value], ) -> Option<Value>

Emit signal by its name with details. Read more
Source§

fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue], ) -> R

Emit signal by signal id with details. Read more
Source§

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value], ) -> Option<Value>

Emit signal by signal id with details. Read more
Source§

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.
Source§

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + Send + Sync + 'static,

Connect to the notify signal of the object. Read more
Source§

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + 'static,

Connect to the notify signal of the object. Read more
Source§

unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F, ) -> SignalHandlerId
where F: Fn(&T, &ParamSpec),

Connect to the notify signal of the object. Read more
Source§

fn notify(&self, property_name: &str)

Notify that the given property has changed its value. Read more
Source§

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value. Read more
Source§

fn downgrade(&self) -> WeakRef<T>

Downgrade this object to a weak reference.
Source§

fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + Send + 'static,

Add a callback to be notified when the Object is disposed.
Source§

fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + 'static,

Add a callback to be notified when the Object is disposed. Read more
Source§

fn bind_property<'a, 'f, 't, O>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str, ) -> BindingBuilder<'a, 'f, 't>
where O: ObjectType,

Bind property source_property on this object to the target_property on the target object. Read more
Source§

fn ref_count(&self) -> u32

Returns the strong reference count of this object.
Source§

unsafe fn run_dispose(&self)

Runs the dispose mechanism of the object. Read more
Source§

impl<T> Property for T
where T: HasParamSpec,

Source§

type Value = T

Source§

impl<T> PropertyGet for T
where T: HasParamSpec,

Source§

type Value = T

Source§

fn get<R, F>(&self, f: F) -> R
where F: Fn(&<T as PropertyGet>::Value) -> R,

Source§

impl<T> StaticTypeExt for T
where T: StaticType,

Source§

fn ensure_type()

Ensures that the type has been registered with the type system.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> TransparentType for T

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T> TryFromClosureReturnValue for T
where T: for<'a> FromValue<'a> + StaticType + 'static,

Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<'a, T, C, E> FromValueOptional<'a> for T
where T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,

Source§

impl<Super, Sub> MayDowncastTo<Sub> for Super
where Super: IsA<Super>, Sub: IsA<Super>,