Struct gtk4::SpinButton

pub struct SpinButton { /* private fields */ }

A SpinButton is an ideal way to allow the user to set the value of some attribute.

Rather than having to directly type a number into a Entry, SpinButton allows the user to click on one of two arrows to increment or decrement the displayed value. A value can still be typed in, with the bonus that it can be checked to ensure it is in a given range.

The main properties of a SpinButton are through an adjustment. See the Adjustment documentation for more details about an adjustment’s properties.

Note that SpinButton will by default make its entry large enough to accommodate the lower and upper bounds of the adjustment. If this is not desired, the automatic sizing can be turned off by explicitly setting width-chars to a value != -1.

Using a GtkSpinButton to get an integer

⚠️ The following code is in c ⚠️

// Provides a function to retrieve an integer value from a GtkSpinButton
// and creates a spin button to model percentage values.

int
grab_int_value (GtkSpinButton *button,
                gpointer       user_data)
{
  return gtk_spin_button_get_value_as_int (button);
}

void
create_integer_spin_button (void)
{

  GtkWidget *window, *button;
  GtkAdjustment *adjustment;

  adjustment = gtk_adjustment_new (50.0, 0.0, 100.0, 1.0, 5.0, 0.0);

  window = gtk_window_new ();

  // creates the spinbutton, with no decimal places
  button = gtk_spin_button_new (adjustment, 1.0, 0);
  gtk_window_set_child (GTK_WINDOW (window), button);

  gtk_window_present (GTK_WINDOW (window));
}

Using a GtkSpinButton to get a floating point value

⚠️ The following code is in c ⚠️

// Provides a function to retrieve a floating point value from a
// GtkSpinButton, and creates a high precision spin button.

float
grab_float_value (GtkSpinButton *button,
                  gpointer       user_data)
{
  return gtk_spin_button_get_value (button);
}

void
create_floating_spin_button (void)
{
  GtkWidget *window, *button;
  GtkAdjustment *adjustment;

  adjustment = gtk_adjustment_new (2.500, 0.0, 5.0, 0.001, 0.1, 0.0);

  window = gtk_window_new ();

  // creates the spinbutton, with three decimal places
  button = gtk_spin_button_new (adjustment, 0.001, 3);
  gtk_window_set_child (GTK_WINDOW (window), button);

  gtk_window_present (GTK_WINDOW (window));
}

CSS nodes

spinbutton.horizontal
├── text
│    ├── undershoot.left
│    ╰── undershoot.right
├── button.down
╰── button.up

spinbutton.vertical
├── button.up
├── text
│    ├── undershoot.left
│    ╰── undershoot.right
╰── button.down

SpinButtons main CSS node has the name spinbutton. It creates subnodes for the entry and the two buttons, with these names. The button nodes have the style classes .up and .down. The Text subnodes (if present) are put below the text node. The orientation of the spin button is reflected in the .vertical or .horizontal style class on the main node.

Accessibility

SpinButton uses the AccessibleRole::SpinButton role.

Properties

activates-default

Whether to activate the default widget when the spin button is activated.

See activate for what counts as activation.

Readable | Writeable

adjustment

The adjustment that holds the value of the spin button.

Readable | Writeable

climb-rate

The acceleration rate when you hold down a button or key.

Readable | Writeable

digits

The number of decimal places to display.

Readable | Writeable

numeric

Whether non-numeric characters should be ignored.

Readable | Writeable

snap-to-ticks

Whether erroneous values are automatically changed to the spin buttons nearest step increment.

Readable | Writeable

update-policy

Whether the spin button should update always, or only when the value is acceptable.

Readable | Writeable

value

The current value.

Readable | Writeable

wrap

Whether a spin button should wrap upon reaching its limits.

Readable | Writeable

Widget

can-focus

Whether the widget or any of its descendents can accept the input focus.

This property is meant to be set by widget implementations, typically in their instance init function.

Readable | Writeable

can-target

Whether the widget can receive pointer events.

Readable | Writeable

css-classes

A list of css classes applied to this widget.

Readable | Writeable

css-name

The name of this widget in the CSS tree.

This property is meant to be set by widget implementations, typically in their instance init function.

Readable | Writeable | Construct Only

cursor

The cursor used by @widget.

Readable | Writeable

focus-on-click

Whether the widget should grab focus when it is clicked with the mouse.

This property is only relevant for widgets that can take focus.

Readable | Writeable

focusable

Whether this widget itself will accept the input focus.

Readable | Writeable

halign

How to distribute horizontal space if widget gets extra space.

Readable | Writeable

has-default

Whether the widget is the default widget.

Readable

has-focus

Whether the widget has the input focus.

Readable

has-tooltip

Enables or disables the emission of the ::query-tooltip signal on @widget.

A value of true indicates that @widget can have a tooltip, in this case the widget will be queried using query-tooltip to determine whether it will provide a tooltip or not.

Readable | Writeable

height-request

Override for height request of the widget.

If this is -1, the natural request will be used.

Readable | Writeable

hexpand

Whether to expand horizontally.

Readable | Writeable

hexpand-set

Whether to use the hexpand property.

Readable | Writeable

layout-manager

The LayoutManager instance to use to compute the preferred size of the widget, and allocate its children.

This property is meant to be set by widget implementations, typically in their instance init function.

Readable | Writeable

margin-bottom

Margin on bottom side of widget.

This property adds margin outside of the widget’s normal size request, the margin will be added in addition to the size from WidgetExt::set_size_request() for example.

Readable | Writeable

margin-end

Margin on end of widget, horizontally.

This property supports left-to-right and right-to-left text directions.

This property adds margin outside of the widget’s normal size request, the margin will be added in addition to the size from WidgetExt::set_size_request() for example.

Readable | Writeable

margin-start

Margin on start of widget, horizontally.

This property supports left-to-right and right-to-left text directions.

This property adds margin outside of the widget’s normal size request, the margin will be added in addition to the size from WidgetExt::set_size_request() for example.

Readable | Writeable

margin-top

Margin on top side of widget.

This property adds margin outside of the widget’s normal size request, the margin will be added in addition to the size from WidgetExt::set_size_request() for example.

Readable | Writeable

name

The name of the widget.

Readable | Writeable

opacity

The requested opacity of the widget.

Readable | Writeable

overflow

How content outside the widget’s content area is treated.

This property is meant to be set by widget implementations, typically in their instance init function.

Readable | Writeable

parent

The parent widget of this widget.

Readable

receives-default

Whether the widget will receive the default action when it is focused.

Readable | Writeable

root

The Root widget of the widget tree containing this widget.

This will be None if the widget is not contained in a root widget.

Readable

scale-factor

The scale factor of the widget.

Readable

sensitive

Whether the widget responds to input.

Readable | Writeable

tooltip-markup

Sets the text of tooltip to be the given string, which is marked up with Pango markup.

Also see Tooltip::set_markup().

This is a convenience property which will take care of getting the tooltip shown if the given string is not None: has-tooltip will automatically be set to true and there will be taken care of query-tooltip in the default signal handler.

Note that if both tooltip-text and tooltip-markup are set, the last one wins.

Readable | Writeable

tooltip-text

Sets the text of tooltip to be the given string.

Also see Tooltip::set_text().

This is a convenience property which will take care of getting the tooltip shown if the given string is not None: has-tooltip will automatically be set to true and there will be taken care of query-tooltip in the default signal handler.

Note that if both tooltip-text and tooltip-markup are set, the last one wins.

Readable | Writeable

valign

How to distribute vertical space if widget gets extra space.

Readable | Writeable

vexpand

Whether to expand vertically.

Readable | Writeable

vexpand-set

Whether to use the vexpand property.

Readable | Writeable

visible

Whether the widget is visible.

Readable | Writeable

width-request

Override for width request of the widget.

If this is -1, the natural request will be used.

Readable | Writeable

Accessible

accessible-role

The accessible role of the given Accessible implementation.

The accessible role cannot be changed once set.

Readable | Writeable

CellEditable

editing-canceled

Indicates whether editing on the cell has been canceled.

Readable | Writeable

Editable

cursor-position

The current position of the insertion cursor in chars.

Readable

editable

Whether the entry contents can be edited.

Readable | Writeable

enable-undo

If undo/redo should be enabled for the editable.

Readable | Writeable

max-width-chars

The desired maximum width of the entry, in characters.

Readable | Writeable

selection-bound

The position of the opposite end of the selection from the cursor in chars.

Readable

text

The contents of the entry.

Readable | Writeable

width-chars

Number of characters to leave space for in the entry.

Readable | Writeable

xalign

The horizontal alignment, from 0 (left) to 1 (right).

Reversed for RTL layouts.

Readable | Writeable

Orientable

orientation

The orientation of the orientable.

Readable | Writeable

Signals

activate

Emitted when the spin button is activated.

The keybindings for this signal are all forms of the Enter key.

If the Enter key results in the value being committed to the spin button, then activation does not occur until Enter is pressed again.

Action

change-value

Emitted when the user initiates a value change.

This is a keybinding signal.

Applications should not connect to it, but may emit it with g_signal_emit_by_name() if they need to control the cursor programmatically.

The default bindings for this signal are Up/Down and PageUp/PageDown.

Action

input

Emitted to convert the users input into a double value.

The signal handler is expected to use EditableExt::text() to retrieve the text of the spinbutton and set @new_value to the new value.

The default conversion uses g_strtod().

output

Emitted to tweak the formatting of the value for display.

⚠️ The following code is in c ⚠️

// show leading zeros
static gboolean
on_output (GtkSpinButton *spin,
           gpointer       data)
{
   char *text;
   int value;

   value = gtk_spin_button_get_value_as_int (spin);
   text = g_strdup_printf ("%02d", value);
   gtk_editable_set_text (GTK_EDITABLE (spin), text):
   g_free (text);

   return TRUE;
}

value-changed

Emitted when the value is changed.

Also see the output signal.

wrapped

Emitted right after the spinbutton wraps from its maximum to its minimum value or vice-versa.

Widget

destroy

Signals that all holders of a reference to the widget should release the reference that they hold.

May result in finalization of the widget if all references are released.

This signal is not suitable for saving widget state.

direction-changed

Emitted when the text direction of a widget changes.

hide

Emitted when @widget is hidden.

keynav-failed

Emitted if keyboard navigation fails.

See WidgetExt::keynav_failed() for details.

map

Emitted when @widget is going to be mapped.

A widget is mapped when the widget is visible (which is controlled with visible) and all its parents up to the toplevel widget are also visible.

The ::map signal can be used to determine whether a widget will be drawn, for instance it can resume an animation that was stopped during the emission of unmap.

mnemonic-activate

Emitted when a widget is activated via a mnemonic.

The default handler for this signal activates @widget if @group_cycling is false, or just makes @widget grab focus if @group_cycling is true.

move-focus

Emitted when the focus is moved.

The ::move-focus signal is a keybinding signal.

The default bindings for this signal are Tab to move forward, and Shift+Tab to move backward.

Action

query-tooltip

Emitted when the widget’s tooltip is about to be shown.

This happens when the has-tooltip property is true and the hover timeout has expired with the cursor hovering “above” @widget; or emitted when @widget got focus in keyboard mode.

Using the given coordinates, the signal handler should determine whether a tooltip should be shown for @widget. If this is the case true should be returned, false otherwise. Note that if @keyboard_mode is true, the values of @x and @y are undefined and should not be used.

The signal handler is free to manipulate @tooltip with the therefore destined function calls.

realize

Emitted when @widget is associated with a gdk::Surface.

This means that WidgetExt::realize() has been called or the widget has been mapped (that is, it is going to be drawn).

show

Emitted when @widget is shown.

state-flags-changed

Emitted when the widget state changes.

See WidgetExt::state_flags().

unmap

Emitted when @widget is going to be unmapped.

A widget is unmapped when either it or any of its parents up to the toplevel widget have been set as hidden.

As ::unmap indicates that a widget will not be shown any longer, it can be used to, for example, stop an animation on the widget.

unrealize

Emitted when the gdk::Surface associated with @widget is destroyed.

This means that WidgetExt::unrealize() has been called or the widget has been unmapped (that is, it is going to be hidden).

CellEditable

editing-done

This signal is a sign for the cell renderer to update its value from the @cell_editable.

Implementations of CellEditable are responsible for emitting this signal when they are done editing, e.g. Entry emits this signal when the user presses Enter. Typical things to do in a handler for ::editing-done are to capture the edited value, disconnect the @cell_editable from signals on the CellRenderer, etc.

gtk_cell_editable_editing_done() is a convenience method for emitting GtkCellEditable::editing-done.

remove-widget

This signal is meant to indicate that the cell is finished editing, and the @cell_editable widget is being removed and may subsequently be destroyed.

Implementations of CellEditable are responsible for emitting this signal when they are done editing. It must be emitted after the GtkCellEditable::editing-done signal, to give the cell renderer a chance to update the cell’s value before the widget is removed.

gtk_cell_editable_remove_widget() is a convenience method for emitting GtkCellEditable::remove-widget.

Editable

changed

Emitted at the end of a single user-visible operation on the contents.

E.g., a paste operation that replaces the contents of the selection will cause only one signal emission (even though it is implemented by first deleting the selection, then inserting the new content, and may cause multiple ::notify::text signals to be emitted).

delete-text

Emitted when text is deleted from the widget by the user.

The default handler for this signal will normally be responsible for deleting the text, so by connecting to this signal and then stopping the signal with g_signal_stop_emission(), it is possible to modify the range of deleted text, or prevent it from being deleted entirely.

The @start_pos and @end_pos parameters are interpreted as for EditableExt::delete_text().

insert-text

Emitted when text is inserted into the widget by the user.

The default handler for this signal will normally be responsible for inserting the text, so by connecting to this signal and then stopping the signal with g_signal_stop_emission(), it is possible to modify the inserted text, or prevent it from being inserted entirely.

Implements

WidgetExt, [trait@glib::ObjectExt], AccessibleExt, BuildableExt, ConstraintTargetExt, AccessibleRangeExt, CellEditableExt, EditableExt, OrientableExt, WidgetExtManual, AccessibleExtManual, EditableExtManual

Implementations

impl SpinButton

pub fn new( adjustment: Option<&impl IsA<Adjustment>>, climb_rate: f64, digits: u32 ) -> SpinButton

Creates a new SpinButton.

adjustment

the Adjustment that this spin button should use

climb_rate

specifies by how much the rate of change in the value will accelerate if you continue to hold down an up/down button or arrow key

digits

the number of decimal places to display

Returns

The new SpinButton

pub fn with_range(min: f64, max: f64, step: f64) -> SpinButton

Creates a new SpinButton with the given properties.

This is a convenience constructor that allows creation of a numeric SpinButton without manually creating an adjustment. The value is initially set to the minimum value and a page increment of 10 * @step is the default. The precision of the spin button is equivalent to the precision of @step.

Note that the way in which the precision is derived works best if @step is a power of ten. If the resulting precision is not suitable for your needs, use set_digits() to correct it.

min

Minimum allowable value

max

Maximum allowable value

step

Increment added or subtracted by spinning the widget

Returns

The new SpinButton

pub fn builder() -> SpinButtonBuilder

Creates a new builder-pattern struct instance to construct SpinButton objects.

This method returns an instance of SpinButtonBuilder which can be used to create SpinButton objects.

pub fn configure( &self, adjustment: Option<&impl IsA<Adjustment>>, climb_rate: f64, digits: u32 )

Changes the properties of an existing spin button.

The adjustment, climb rate, and number of decimal places are updated accordingly.

adjustment

a Adjustment to replace the spin button’s existing adjustment, or None to leave its current adjustment unchanged

climb_rate

the new climb rate

digits

the number of decimal places to display in the spin button

pub fn activates_default(&self) -> bool

Available on crate feature v4_14 only.

Retrieves the value set by set_activates_default().

Returns

true if the spin button will activate the default widget

pub fn adjustment(&self) -> Adjustment

Get the adjustment associated with a SpinButton.

Returns

the Adjustment of @self

pub fn climb_rate(&self) -> f64

Returns the acceleration rate for repeated changes.

Returns

the acceleration rate

pub fn digits(&self) -> u32

Fetches the precision of @self.

Returns

the current precision

pub fn increments(&self) -> (f64, f64)

Gets the current step and page the increments used by @self.

See set_increments().

Returns

step

location to store step increment

page

location to store page increment

pub fn is_numeric(&self) -> bool

Returns whether non-numeric text can be typed into the spin button.

Returns

true if only numeric text can be entered

pub fn range(&self) -> (f64, f64)

Gets the range allowed for @self.

See set_range().

Returns

min

location to store minimum allowed value

max

location to store maximum allowed value

pub fn snaps_to_ticks(&self) -> bool

Returns whether the values are corrected to the nearest step.

Returns

true if values are snapped to the nearest step

pub fn update_policy(&self) -> SpinButtonUpdatePolicy

Gets the update behavior of a spin button.

See set_update_policy().

Returns

the current update policy

pub fn value(&self) -> f64

Get the value in the @self.

Returns

the value of @self

pub fn value_as_int(&self) -> i32

Get the value @self represented as an integer.

Returns

the value of @self

pub fn wraps(&self) -> bool

Returns whether the spin button’s value wraps around to the opposite limit when the upper or lower limit of the range is exceeded.

Returns

true if the spin button wraps around

pub fn set_activates_default(&self, activates_default: bool)

Available on crate feature v4_14 only.

Sets whether activating the spin button will activate the default widget for the window containing the spin button.

See activate for what counts as activation.

activates_default

true to activate window’s default widget on activation

pub fn set_adjustment(&self, adjustment: &impl IsA<Adjustment>)

Replaces the Adjustment associated with @self.

adjustment

a Adjustment to replace the existing adjustment

pub fn set_climb_rate(&self, climb_rate: f64)

Sets the acceleration rate for repeated changes when you hold down a button or key.

climb_rate

the rate of acceleration, must be >= 0

pub fn set_digits(&self, digits: u32)

Set the precision to be displayed by @self.

Up to 20 digit precision is allowed.

digits

the number of digits after the decimal point to be displayed for the spin button’s value

pub fn set_increments(&self, step: f64, page: f64)

Sets the step and page increments for spin_button.

This affects how quickly the value changes when the spin button’s arrows are activated.

step

increment applied for a button 1 press.

page

increment applied for a button 2 press.

pub fn set_numeric(&self, numeric: bool)

Sets the flag that determines if non-numeric text can be typed into the spin button.

numeric

flag indicating if only numeric entry is allowed

pub fn set_range(&self, min: f64, max: f64)

Sets the minimum and maximum allowable values for @self.

If the current value is outside this range, it will be adjusted to fit within the range, otherwise it will remain unchanged.

min

minimum allowable value

max

maximum allowable value

pub fn set_snap_to_ticks(&self, snap_to_ticks: bool)

Sets the policy as to whether values are corrected to the nearest step increment when a spin button is activated after providing an invalid value.

snap_to_ticks

a flag indicating if invalid values should be corrected

pub fn set_update_policy(&self, policy: SpinButtonUpdatePolicy)

Sets the update behavior of a spin button.

This determines whether the spin button is always updated or only when a valid value is set.

policy

a SpinButtonUpdatePolicy value

pub fn set_value(&self, value: f64)

Sets the value of @self.

value

the new value

pub fn set_wrap(&self, wrap: bool)

Sets the flag that determines if a spin button value wraps around to the opposite limit when the upper or lower limit of the range is exceeded.

wrap

a flag indicating if wrapping behavior is performed

pub fn spin(&self, direction: SpinType, increment: f64)

Increment or decrement a spin button’s value in a specified direction by a specified amount.

direction

a SpinType indicating the direction to spin

increment

step increment to apply in the specified direction

pub fn update(&self)

Manually force an update of the spin button.

pub fn connect_activate<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId

Available on crate feature v4_14 only.

Emitted when the spin button is activated.

The keybindings for this signal are all forms of the Enter key.

If the Enter key results in the value being committed to the spin button, then activation does not occur until Enter is pressed again.

pub fn emit_activate(&self)

Available on crate feature v4_14 only.

pub fn connect_change_value<F: Fn(&Self, ScrollType) + 'static>( &self, f: F ) -> SignalHandlerId

Emitted when the user initiates a value change.

This is a keybinding signal.

Applications should not connect to it, but may emit it with g_signal_emit_by_name() if they need to control the cursor programmatically.

The default bindings for this signal are Up/Down and PageUp/PageDown.

scroll

a ScrollType to specify the speed and amount of change

pub fn emit_change_value(&self, scroll: ScrollType)

pub fn connect_output<F: Fn(&Self) -> Propagation + 'static>( &self, f: F ) -> SignalHandlerId

Emitted to tweak the formatting of the value for display.

⚠️ The following code is in c ⚠️

// show leading zeros
static gboolean
on_output (GtkSpinButton *spin,
           gpointer       data)
{
   char *text;
   int value;

   value = gtk_spin_button_get_value_as_int (spin);
   text = g_strdup_printf ("%02d", value);
   gtk_editable_set_text (GTK_EDITABLE (spin), text):
   g_free (text);

   return TRUE;
}

Returns

true if the value has been displayed

pub fn connect_value_changed<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

Emitted when the value is changed.

Also see the output signal.

pub fn connect_wrapped<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId

Emitted right after the spinbutton wraps from its maximum to its minimum value or vice-versa.

pub fn connect_activates_default_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

Available on crate feature v4_14 only.

pub fn connect_adjustment_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

pub fn connect_climb_rate_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

pub fn connect_digits_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

pub fn connect_numeric_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

pub fn connect_snap_to_ticks_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

pub fn connect_update_policy_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

pub fn connect_value_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

pub fn connect_wrap_notify<F: Fn(&Self) + 'static>( &self, f: F ) -> SignalHandlerId

impl SpinButton

pub fn connect_input<F>(&self, f: F) -> SignalHandlerId

where F: Fn(&Self) -> Option<Result<f64, ()>> + 'static,

Emitted to convert the users input into a double value.

The signal handler is expected to use EditableExt::text() to retrieve the text of the spinbutton and set @new_value to the new value.

The default conversion uses g_strtod().

Returns

true for a successful conversion, false if the input was not handled, and GTK_INPUT_ERROR if the conversion failed.

new_value

return location for the new value

Trait Implementations

impl Clone for SpinButton

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SpinButton

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for SpinButton

fn default() -> Self

Returns the “default value” for a type.

impl HasParamSpec for SpinButton

type ParamSpec = ParamSpecObject

type SetValue = SpinButton

Preferred value to be used as setter for the associated ParamSpec.

type BuilderFn = fn(_: &str) -> ParamSpecObjectBuilder<'_, SpinButton>

fn param_spec_builder() -> Self::BuilderFn

impl Hash for SpinButton

fn hash<H>(&self, state: &mut H)

where H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for SpinButton

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl ParentClassIs for SpinButton

type Parent = Widget

impl<OT: ObjectType> PartialEq<OT> for SpinButton

fn eq(&self, other: &OT) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<OT: ObjectType> PartialOrd<OT> for SpinButton

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl StaticType for SpinButton

fn static_type() -> Type

Returns the type identifier of Self.

impl Eq for SpinButton

impl IsA<Accessible> for SpinButton

impl IsA<AccessibleRange> for SpinButton

impl IsA<Buildable> for SpinButton

impl IsA<CellEditable> for SpinButton

impl IsA<ConstraintTarget> for SpinButton

impl IsA<Editable> for SpinButton

impl IsA<Orientable> for SpinButton

impl IsA<Widget> for SpinButton