gdk_pixbuf

Enum InterpType

source
#[non_exhaustive]
pub enum InterpType { Nearest, Tiles, Bilinear, Hyper, }
Expand description

Interpolation modes for scaling functions.

The GDK_INTERP_NEAREST mode is the fastest scaling method, but has horrible quality when scaling down; GDK_INTERP_BILINEAR is the best choice if you aren’t sure what to choose, it has a good speed/quality balance.

Note: Cubic filtering is missing from the list; hyperbolic interpolation is just as fast and results in higher quality.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

Nearest

Nearest neighbor sampling; this is the fastest and lowest quality mode. Quality is normally unacceptable when scaling down, but may be OK when scaling up.

§

Tiles

This is an accurate simulation of the PostScript image operator without any interpolation enabled. Each pixel is rendered as a tiny parallelogram of solid color, the edges of which are implemented with antialiasing. It resembles nearest neighbor for enlargement, and bilinear for reduction.

§

Bilinear

Best quality/speed balance; use this mode by default. Bilinear interpolation. For enlargement, it is equivalent to point-sampling the ideal bilinear-interpolated image. For reduction, it is equivalent to laying down small tiles and integrating over the coverage area.

§

Hyper

This is the slowest and highest quality reconstruction function. It is derived from the hyperbolic filters in Wolberg’s “Digital Image Warping”, and is formally defined as the hyperbolic-filter sampling the ideal hyperbolic-filter interpolated image (the filter is designed to be idempotent for 1:1 pixel mapping). Deprecated: this interpolation filter is deprecated, as in reality it has a lower quality than the @GDK_INTERP_BILINEAR filter (Since: 2.38)

Trait Implementations§

source§

impl Clone for InterpType

source§

fn clone(&self) -> InterpType

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for InterpType

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl From<InterpType> for Value

source§

fn from(v: InterpType) -> Self

Converts to this type from the input type.
source§

impl<'a> FromValue<'a> for InterpType

source§

type Checker = GenericValueTypeChecker<InterpType>

Value type checker.
source§

unsafe fn from_value(value: &'a Value) -> Self

Get the contained value from a Value. Read more
source§

impl HasParamSpec for InterpType

source§

type ParamSpec = ParamSpecEnum

source§

type SetValue = InterpType

Preferred value to be used as setter for the associated ParamSpec.
source§

type BuilderFn = fn(_: &str, _: InterpType) -> ParamSpecEnumBuilder<'_, InterpType>

source§

fn param_spec_builder() -> Self::BuilderFn

source§

impl Hash for InterpType

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for InterpType

source§

fn cmp(&self, other: &InterpType) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for InterpType

source§

fn eq(&self, other: &InterpType) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for InterpType

source§

fn partial_cmp(&self, other: &InterpType) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for InterpType

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl ToValue for InterpType

source§

fn to_value(&self) -> Value

Convert a value to a Value.
source§

fn value_type(&self) -> Type

Returns the type identifier of self. Read more
source§

impl ValueType for InterpType

source§

type Type = InterpType

Type to get the Type from. Read more
source§

impl Copy for InterpType

source§

impl Eq for InterpType

source§

impl StructuralPartialEq for InterpType

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoClosureReturnValue for T
where T: Into<Value>,

source§

impl<T> Property for T
where T: HasParamSpec,

source§

type Value = T

source§

impl<T> PropertyGet for T
where T: HasParamSpec,

source§

type Value = T

source§

fn get<R, F>(&self, f: F) -> R
where F: Fn(&<T as PropertyGet>::Value) -> R,

source§

impl<T> StaticTypeExt for T
where T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToOwned for T
where T: Clone,

source§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToSendValue for T
where T: Send + ToValue + ?Sized,

source§

fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for T
where T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.