#[repr(transparent)]
pub struct DeviceManager { /* private fields */ }
Expand description

In addition to a single pointer and keyboard for user interface input, GDK contains support for a variety of input devices, including graphics tablets, touchscreens and multiple pointers/keyboards interacting simultaneously with the user interface. Such input devices often have additional features, such as sub-pixel positioning information and additional device-dependent information.

In order to query the device hierarchy and be aware of changes in the device hierarchy (such as virtual devices being created or removed, or physical devices being plugged or unplugged), GDK provides DeviceManager.

By default, and if the platform supports it, GDK is aware of multiple keyboard/pointer pairs and multitouch devices. This behavior can be changed by calling gdk_disable_multidevice() before Display::open(). There should rarely be a need to do that though, since GDK defaults to a compatibility mode in which it will emit just one enter/leave event pair for all devices on a window. To enable per-device enter/leave events and other multi-pointer interaction features, Window::set_support_multidevice() must be called on GdkWindows (or gtk_widget_set_support_multidevice() on widgets). window. See the Window::set_support_multidevice() documentation for more information.

On X11, multi-device support is implemented through XInput 2. Unless gdk_disable_multidevice() is called, the XInput 2 DeviceManager implementation will be used as the input source. Otherwise either the core or XInput 1 implementations will be used.

For simple applications that don’t have any special interest in input devices, the so-called “client pointer” provides a reasonable approximation to a simple setup with a single pointer and keyboard. The device that has been set as the client pointer can be accessed via gdk_device_manager_get_client_pointer().

Conceptually, in multidevice mode there are 2 device types. Virtual devices (or master devices) are represented by the pointer cursors and keyboard foci that are seen on the screen. Physical devices (or slave devices) represent the hardware that is controlling the virtual devices, and thus have no visible cursor on the screen.

Virtual devices are always paired, so there is a keyboard device for every pointer device. Associations between devices may be inspected through Device::associated_device().

There may be several virtual devices, and several physical devices could be controlling each of these virtual devices. Physical devices may also be “floating”, which means they are not attached to any virtual device.

Master and slave devices

carlos@sacarino:~$ xinput list
⎡ Virtual core pointer                          id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ Wacom ISDv4 E6 Pen stylus                 id=10   [slave  pointer  (2)]
⎜   ↳ Wacom ISDv4 E6 Finger touch               id=11   [slave  pointer  (2)]
⎜   ↳ SynPS/2 Synaptics TouchPad                id=13   [slave  pointer  (2)]
⎜   ↳ TPPS/2 IBM TrackPoint                     id=14   [slave  pointer  (2)]
⎜   ↳ Wacom ISDv4 E6 Pen eraser                 id=16   [slave  pointer  (2)]
⎣ Virtual core keyboard                         id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
    ↳ Power Button                              id=6    [slave  keyboard (3)]
    ↳ Video Bus                                 id=7    [slave  keyboard (3)]
    ↳ Sleep Button                              id=8    [slave  keyboard (3)]
    ↳ Integrated Camera                         id=9    [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard              id=12   [slave  keyboard (3)]
    ↳ ThinkPad Extra Buttons                    id=15   [slave  keyboard (3)]

By default, GDK will automatically listen for events coming from all master devices, setting the Device for all events coming from input devices. Events containing device information are EventType::MotionNotify, EventType::ButtonPress, [EventType::_2buttonPress][crate::EventType::_2buttonPress], [EventType::_3buttonPress][crate::EventType::_3buttonPress], EventType::ButtonRelease, EventType::Scroll, EventType::KeyPress, EventType::KeyRelease, EventType::EnterNotify, EventType::LeaveNotify, EventType::FocusChange, EventType::ProximityIn, EventType::ProximityOut, EventType::DragEnter, EventType::DragLeave, EventType::DragMotion, EventType::DragStatus, EventType::DropStart, EventType::DropFinished and EventType::GrabBroken. When dealing with an event on a master device, it is possible to get the source (slave) device that the event originated from via gdk_event_get_source_device().

On a standard session, all physical devices are connected by default to the “Virtual Core Pointer/Keyboard” master devices, hence routing all events through these. This behavior is only modified by device grabs, where the slave device is temporarily detached for as long as the grab is held, and more permanently by user modifications to the device hierarchy.

On certain application specific setups, it may make sense to detach a physical device from its master pointer, and mapping it to an specific window. This can be achieved by the combination of gdk_device_grab() and Device::set_mode().

In order to listen for events coming from devices other than a virtual device, Window::set_device_events() must be called. Generally, this function can be used to modify the event mask for any given device.

Input devices may also provide additional information besides X/Y. For example, graphics tablets may also provide pressure and X/Y tilt information. This information is device-dependent, and may be queried through gdk_device_get_axis(). In multidevice mode, virtual devices will change axes in order to always represent the physical device that is routing events through it. Whenever the physical device changes, the property::Device::n-axes property will be notified, and Device::list_axes() will return the new device axes.

Devices may also have associated “keys” or macro buttons. Such keys can be globally set to map into normal X keyboard events. The mapping is set using Device::set_key().

In GTK+ 3.20, a new Seat object has been introduced that supersedes DeviceManager and should be preferred in newly written code.

This is an Abstract Base Class, you cannot instantiate it.

Implementations

Gets the Display associated to self.

Returns

the Display to which self is associated to, or None. This memory is owned by GDK and must not be freed or unreferenced.

The ::device-added signal is emitted either when a new master pointer is created, or when a slave (Hardware) input device is plugged in.

device

the newly added Device.

The ::device-changed signal is emitted whenever a device has changed in the hierarchy, either slave devices being disconnected from their master device or connected to another one, or master devices being added or removed a slave device.

If a slave device is detached from all master devices (Device::associated_device() returns None), its DeviceType will change to DeviceType::Floating, if it’s attached, it will change to DeviceType::Slave.

device

the Device that changed.

The ::device-removed signal is emitted either when a master pointer is removed, or when a slave (Hardware) input device is unplugged.

device

the just removed Device.

Trait Implementations

Returns a copy of the value. Read more
Performs copy-assignment from source. Read more
Formats the value using the given formatter. Read more
Formats the value using the given formatter. Read more
Feeds this value into the given Hasher. Read more
Feeds a slice of this type into the given Hasher. Read more
This method returns an Ordering between self and other. Read more
Compares and returns the maximum of two values. Read more
Compares and returns the minimum of two values. Read more
Restrict a value to a certain interval. Read more
This method tests for self and other values to be equal, and is used by ==. Read more
This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason. Read more
This method returns an ordering between self and other values if one exists. Read more
This method tests less than (for self and other) and is used by the < operator. Read more
This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
This method tests greater than (for self and other) and is used by the > operator. Read more
This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
Returns the type identifier of Self.

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more
Immutably borrows from an owned value. Read more
Mutably borrows from an owned value. Read more
Upcasts an object to a superclass or interface T. Read more
Upcasts an object to a reference of its superclass or interface T. Read more
Tries to downcast to a subclass or interface implementor T. Read more
Tries to downcast to a reference of its subclass or interface implementor T. Read more
Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
Casts to T unconditionally. Read more
Casts to &T unconditionally. Read more

Returns the argument unchanged.

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Returns true if the object is an instance of (can be cast to) T.
Returns the type of the object.
Returns the ObjectClass of the object. Read more
Returns the class of the object.
Returns the class of the object in the given type T. Read more
Returns the interface T of the object. Read more
Sets the property property_name of the object to value value. Read more
Sets the property property_name of the object to value value. Read more
Sets multiple properties of the object at once. Read more
Sets multiple properties of the object at once. Read more
Gets the property property_name of the object and cast it to the type V. Read more
Gets the property property_name of the object. Read more
Check if the object has a property property_name of the given type_. Read more
Get the type of the property property_name of this object. Read more
Get the ParamSpec of the property property_name of this object.
Return all ParamSpec of the properties of this object.
Freeze all property notifications until the return guard object is dropped. Read more
Set arbitrary data on this object with the given key. Read more
Return previously set arbitrary data of this object with the given key. Read more
Retrieve previously set arbitrary data of this object with the given key. Read more
Set arbitrary data on this object with the given key. Read more
Return previously set arbitrary data of this object with the given key. Read more
Retrieve previously set arbitrary data of this object with the given key. Read more
Block a given signal handler. Read more
Unblock a given signal handler.
Stop emission of the currently emitted signal.
Stop emission of the currently emitted signal by the (possibly detailed) signal name.
Connect to the signal signal_name on this object. Read more
Connect to the signal signal_id on this object. Read more
Connect to the signal signal_name on this object. Read more
Connect to the signal signal_id on this object. Read more
Connect to the signal signal_name on this object. Read more
Connect to the signal signal_id on this object. Read more
Connect a closure to the signal signal_name on this object. Read more
Connect a closure to the signal signal_id on this object. Read more
Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures. Read more
Emit signal by signal id. Read more
Same as Self::emit but takes Value for the arguments.
Emit signal by its name. Read more
Emit signal by its name. Read more
Emit signal by its name with details. Read more
Emit signal by its name with details. Read more
Emit signal by signal id with details. Read more
Emit signal by signal id with details. Read more
Disconnect a previously connected signal handler.
Connect to the notify signal of the object. Read more
Connect to the notify signal of the object. Read more
Connect to the notify signal of the object. Read more
Notify that the given property has changed its value. Read more
Notify that the given property has changed its value. Read more
Downgrade this object to a weak reference.
Add a callback to be notified when the Object is disposed.
Add a callback to be notified when the Object is disposed. Read more
Bind property source_property on this object to the target_property on the target object. Read more
Returns the strong reference count of this object.
Ensures that the type has been registered with the type system.
The resulting type after obtaining ownership.
Creates owned data from borrowed data, usually by cloning. Read more
Uses borrowed data to replace owned data, usually by cloning. Read more
Converts the given value to a String. Read more
The type returned in the event of a conversion error.
Performs the conversion.
The type returned in the event of a conversion error.
Performs the conversion.