Struct gtk::Socket

source · [−]

#[repr(transparent)]
pub struct Socket { /* private fields */ }

Expand description

Together with Plug, Socket provides the ability to embed widgets from one process into another process in a fashion that is transparent to the user. One process creates a Socket widget and passes that widget’s window ID to the other process, which then creates a Plug with that window ID. Any widgets contained in the Plug then will appear inside the first application’s window.

The socket’s window ID is obtained by using GtkSocketExt::id(). Before using this function, the socket must have been realized, and for hence, have been added to its parent.

Obtaining the window ID of a socket.

⚠️ The following code is in C ⚠️

GtkWidget *socket = gtk_socket_new ();
gtk_widget_show (socket);
gtk_container_add (GTK_CONTAINER (parent), socket);

// The following call is only necessary if one of
// the ancestors of the socket is not yet visible.
gtk_widget_realize (socket);
g_print ("The ID of the sockets window is %#x\n",
         gtk_socket_get_id (socket));

Note that if you pass the window ID of the socket to another process that will create a plug in the socket, you must make sure that the socket widget is not destroyed until that plug is created. Violating this rule will cause unpredictable consequences, the most likely consequence being that the plug will appear as a separate toplevel window. You can check if the plug has been created by using GtkSocketExt::plug_window(). If it returns a non-None value, then the plug has been successfully created inside of the socket.

When GTK+ is notified that the embedded window has been destroyed, then it will destroy the socket as well. You should always, therefore, be prepared for your sockets to be destroyed at any time when the main event loop is running. To prevent this from happening, you can connect to the signal::Socket::plug-removed signal.

The communication between a Socket and a Plug follows the XEmbed Protocol. This protocol has also been implemented in other toolkits, e.g. Qt, allowing the same level of integration when embedding a Qt widget in GTK or vice versa.

The Plug and Socket widgets are only available when GTK+ is compiled for the X11 platform and GDK_WINDOWING_X11 is defined. They can only be used on a GdkX11Display. To use Plug and Socket, you need to include the gtk/gtkx.h header.

Implements

GtkSocketExt, ContainerExt, WidgetExt, glib::ObjectExt, BuildableExt, ContainerExtManual, WidgetExtManual, BuildableExtManual

Struct gtk::Socket

Implementations

impl Socket

pub const NONE: Option<&'static Socket> = None

pub fn new() -> Socket

pub fn builder() -> SocketBuilder

Trait Implementations

impl Clone for Socket

fn clone(&self) -> Self

fn clone_from(&mut self, source: &Self)

impl Debug for Socket

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Default for Socket

fn default() -> Self

impl Display for Socket

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Hash for Socket

fn hash<H>(&self, state: &mut H) where H: Hasher,

fn hash_slice<H>(data: &[Self], state: &mut H) where H: Hasher,

impl<T: SocketImpl> IsSubclassable<T> for Socket

fn class_init(class: &mut Class<Self>)

fn instance_init(instance: &mut InitializingObject<T>)

impl Ord for Socket

fn cmp(&self, other: &Self) -> Ordering

fn max(self, other: Self) -> Self

fn min(self, other: Self) -> Self

fn clamp(self, min: Self, max: Self) -> Self

impl ParentClassIs for Socket

type Parent = Container

impl<OT: ObjectType> PartialEq<OT> for Socket

fn eq(&self, other: &OT) -> bool

fn ne(&self, other: &Rhs) -> bool

impl<OT: ObjectType> PartialOrd<OT> for Socket

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

fn lt(&self, other: &Rhs) -> bool

fn le(&self, other: &Rhs) -> bool

fn gt(&self, other: &Rhs) -> bool

fn ge(&self, other: &Rhs) -> bool

impl StaticType for Socket

fn static_type() -> Type

impl Eq for Socket

impl IsA<Buildable> for Socket

impl IsA<Container> for Socket

impl IsA<Widget> for Socket

Auto Trait Implementations

impl RefUnwindSafe for Socket

impl !Send for Socket

impl !Sync for Socket

impl Unpin for Socket

impl UnwindSafe for Socket

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> Cast for T where T: ObjectType,

fn upcast<T>(self) -> T where T: ObjectType, Self: IsA<T>,

fn upcast_ref<T>(&self) -> &T where T: ObjectType, Self: IsA<T>,

fn downcast<T>(self) -> Result<T, Self> where T: ObjectType, Self: CanDowncast<T>,

fn downcast_ref<T>(&self) -> Option<&T> where T: ObjectType, Self: CanDowncast<T>,

fn dynamic_cast<T>(self) -> Result<T, Self> where T: ObjectType,

fn dynamic_cast_ref<T>(&self) -> Option<&T> where T: ObjectType,

unsafe fn unsafe_cast<T>(self) -> T where T: ObjectType,

unsafe fn unsafe_cast_ref<T>(&self) -> &T where T: ObjectType,

impl<T> From<T> for T

fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

fn into(self) -> U

impl<U> IsSubclassableExt for U where U: IsClass + ParentClassIs,

fn parent_class_init<T>(class: &mut Class<U>) where T: ObjectSubclass, <U as ParentClassIs>::Parent: IsSubclassable<T>,

fn parent_instance_init<T>(instance: &mut InitializingObject<T>) where T: ObjectSubclass, <U as ParentClassIs>::Parent: IsSubclassable<T>,

impl<T> ObjectExt for T where T: ObjectType,

fn is<U>(&self) -> bool where U: StaticType,

fn type_(&self) -> Type

fn object_class(&self) -> &Class<Object>

fn class(&self) -> &Class<T> where T: IsClass,

fn class_of<U>(&self) -> Option<&Class<U>> where U: IsClass,

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>> where U: IsInterface,

fn hash<H>(&self, state: &mut H) where
H: Hasher,

fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T> Cast for T where
T: ObjectType,

fn upcast<T>(self) -> T where
T: ObjectType,
Self: IsA<T>,

fn upcast_ref<T>(&self) -> &T where
T: ObjectType,
Self: IsA<T>,

fn downcast<T>(self) -> Result<T, Self> where
T: ObjectType,
Self: CanDowncast<T>,

fn downcast_ref<T>(&self) -> Option<&T> where
T: ObjectType,
Self: CanDowncast<T>,

fn dynamic_cast<T>(self) -> Result<T, Self> where
T: ObjectType,

fn dynamic_cast_ref<T>(&self) -> Option<&T> where
T: ObjectType,

unsafe fn unsafe_cast<T>(self) -> T where
T: ObjectType,

unsafe fn unsafe_cast_ref<T>(&self) -> &T where
T: ObjectType,

impl<T, U> Into<U> for T where
U: From<T>,

impl<U> IsSubclassableExt for U where
U: IsClass + ParentClassIs,

fn parent_class_init<T>(class: &mut Class<U>) where
T: ObjectSubclass,
<U as ParentClassIs>::Parent: IsSubclassable<T>,

fn parent_instance_init<T>(instance: &mut InitializingObject<T>) where
T: ObjectSubclass,
<U as ParentClassIs>::Parent: IsSubclassable<T>,

impl<T> ObjectExt for T where
T: ObjectType,

fn is<U>(&self) -> bool where
U: StaticType,

fn class(&self) -> &Class<T> where
T: IsClass,

fn class_of<U>(&self) -> Option<&Class<U>> where
U: IsClass,

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>> where
U: IsInterface,

fn try_set_property<V>(
&self,
property_name: &str,
value: V
) -> Result<(), BoolError> where
V: ToValue,

fn set_property<V>(&self, property_name: &str, value: V) where
V: ToValue,

fn try_set_property_from_value(
&self,
property_name: &str,
value: &Value
) -> Result<(), BoolError>

fn try_set_properties(
&self,
property_values: &[(&str, &dyn ToValue )]
) -> Result<(), BoolError>

fn set_properties(&self, property_values: &[(&str, &dyn ToValue )])

fn try_set_properties_from_value(
&self,
property_values: &[(&str, Value )]
) -> Result<(), BoolError>

fn set_properties_from_value(&self, property_values: &[(&str, Value )])

fn try_property<V>(&self, property_name: &str) -> Result<V, BoolError> where
V: 'static + for<'b> FromValue<'b>,

fn property<V>(&self, property_name: &str) -> V where
V: 'static + for<'b> FromValue<'b>,

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD) where
QD: 'static,

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>> where
QD: 'static,

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD> where
QD: 'static,

unsafe fn set_data<QD>(&self, key: &str, value: QD) where
QD: 'static,

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>> where
QD: 'static,

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD> where
QD: 'static,

fn try_connect<F>(
&self,
signal_name: &str,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: 'static + Fn(&[Value ]) -> Option<Value> + Send + Sync,

fn connect<F>(
&self,
signal_name: &str,
after: bool,
callback: F
) -> SignalHandlerId where
F: 'static + Fn(&[Value ]) -> Option<Value> + Send + Sync,

fn try_connect_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: 'static + Fn(&[Value ]) -> Option<Value> + Send + Sync,

fn connect_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F
) -> SignalHandlerId where
F: 'static + Fn(&[Value ]) -> Option<Value> + Send + Sync,

fn try_connect_local<F>(
&self,
signal_name: &str,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: 'static + Fn(&[Value ]) -> Option<Value>,

fn connect_local<F>(
&self,
signal_name: &str,
after: bool,
callback: F
) -> SignalHandlerId where
F: 'static + Fn(&[Value ]) -> Option<Value>,

fn try_connect_local_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: 'static + Fn(&[Value ]) -> Option<Value>,

fn connect_local_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F
) -> SignalHandlerId where
F: 'static + Fn(&[Value ]) -> Option<Value>,

unsafe fn try_connect_unsafe<F>(
&self,
signal_name: &str,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: Fn(&[Value ]) -> Option<Value>,

unsafe fn connect_unsafe<F>(
&self,
signal_name: &str,
after: bool,
callback: F
) -> SignalHandlerId where
F: Fn(&[Value ]) -> Option<Value>,

unsafe fn try_connect_unsafe_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: Fn(&[Value ]) -> Option<Value>,

fn try_connect_closure(
&self,
signal_name: &str,
after: bool,
closure: RustClosure
) -> Result<SignalHandlerId, BoolError>

fn connect_closure(
&self,
signal_name: &str,
after: bool,
closure: RustClosure
) -> SignalHandlerId

fn try_connect_closure_id(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
closure: RustClosure
) -> Result<SignalHandlerId, BoolError>

fn connect_closure_id(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
closure: RustClosure
) -> SignalHandlerId

unsafe fn connect_unsafe_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F
) -> SignalHandlerId where
F: Fn(&[Value ]) -> Option<Value>,

fn try_emit<R>(
&self,
signal_id: SignalId,
args: &[&dyn ToValue ]
) -> Result<R, BoolError> where
R: TryFromClosureReturnValue,

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue ]) -> R where
R: TryFromClosureReturnValue,

fn try_emit_with_values(
&self,
signal_id: SignalId,
args: &[Value ]
) -> Result<Option<Value>, BoolError>

fn emit_with_values(&self, signal_id: SignalId, args: &[Value ]) -> Option<Value>

fn try_emit_by_name<R>(
&self,
signal_name: &str,
args: &[&dyn ToValue ]
) -> Result<R, BoolError> where
R: TryFromClosureReturnValue,

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue ]) -> R where
R: TryFromClosureReturnValue,

fn try_emit_by_name_with_values(
&self,
signal_name: &str,
args: &[Value ]
) -> Result<Option<Value>, BoolError>

fn emit_by_name_with_values(
&self,
signal_name: &str,
args: &[Value ]
) -> Option<Value>

fn try_emit_with_details<R>(
&self,
signal_id: SignalId,
details: Quark,
args: &[&dyn ToValue ]
) -> Result<R, BoolError> where
R: TryFromClosureReturnValue,

fn emit_with_details<R>(
&self,
signal_id: SignalId,
details: Quark,
args: &[&dyn ToValue ]
) -> R where
R: TryFromClosureReturnValue,

fn try_emit_with_details_and_values(
&self,
signal_id: SignalId,
details: Quark,
args: &[Value ]
) -> Result<Option<Value>, BoolError>

fn emit_with_details_and_values(
&self,
signal_id: SignalId,
details: Quark,
args: &[Value ]
) -> Option<Value>

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId where
F: 'static + Fn(&T, &ParamSpec) + Send + Sync,

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId where
F: 'static + Fn(&T, &ParamSpec),