Struct gtk4::EventControllerScroll[][src]

#[repr(transparent)]
pub struct EventControllerScroll(_);
Expand description

EventControllerScroll is an event controller that handles scroll events.

It is capable of handling both discrete and continuous scroll events from mice or touchpads, abstracting them both with the signal::EventControllerScroll::scroll signal. Deltas in the discrete case are multiples of 1.

In the case of continuous scroll events, EventControllerScroll encloses all signal::EventControllerScroll::scroll emissions between two signal::EventControllerScroll::scroll-begin and signal::EventControllerScroll::scroll-end signals.

The behavior of the event controller can be modified by the flags given at creation time, or modified at a later point through set_flags() (e.g. because the scrolling conditions of the widget changed).

The controller can be set up to emit motion for either/both vertical and horizontal scroll events through EventControllerScrollFlags::VERTICAL, EventControllerScrollFlags::HORIZONTAL and EventControllerScrollFlags::BOTH_AXES. If any axis is disabled, the respective signal::EventControllerScroll::scroll delta will be 0. Vertical scroll events will be translated to horizontal motion for the devices incapable of horizontal scrolling.

The event controller can also be forced to emit discrete events on all devices through EventControllerScrollFlags::DISCRETE. This can be used to implement discrete actions triggered through scroll events (e.g. switching across combobox options).

The EventControllerScrollFlags::KINETIC flag toggles the emission of the signal::EventControllerScroll::decelerate signal, emitted at the end of scrolling with two X/Y velocity arguments that are consistent with the motion that was received.

Implements

EventControllerExt, glib::ObjectExt

Implementations

Creates a new event controller that will handle scroll events.

flags

flags affecting the controller behavior

Returns

a new EventControllerScroll

Creates a new builder-pattern struct instance to construct EventControllerScroll objects.

This method returns an instance of EventControllerScrollBuilder which can be used to create EventControllerScroll objects.

Gets the flags conditioning the scroll controller behavior.

Returns

the controller flags.

Sets the flags conditioning scroll controller behavior.

flags

flags affecting the controller behavior

Emitted after scroll is finished if the EventControllerScrollFlags::KINETIC flag is set.

@vel_x and @vel_y express the initial velocity that was imprinted by the scroll events. @vel_x and @vel_y are expressed in pixels/ms.

vel_x

X velocity

vel_y

Y velocity

Signals that the widget should scroll by the amount specified by @dx and @dy.

dx

X delta

dy

Y delta

Returns

true if the scroll event was handled, false otherwise.

Signals that a new scrolling operation has begun.

It will only be emitted on devices capable of it.

Signals that a scrolling operation has finished.

It will only be emitted on devices capable of it.

Trait Implementations

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

Returns the “default value” for a type. Read more

Formats the value using the given formatter. Read more

Feeds this value into the given Hasher. Read more

Feeds a slice of this type into the given Hasher. Read more

This method returns an Ordering between self and other. Read more

Compares and returns the maximum of two values. Read more

Compares and returns the minimum of two values. Read more

Restrict a value to a certain interval. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

This method returns an ordering between self and other values if one exists. Read more

This method tests less than (for self and other) and is used by the < operator. Read more

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

This method tests greater than (for self and other) and is used by the > operator. Read more

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

Returns the type identifier of Self.

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Upcasts an object to a superclass or interface T. Read more

Upcasts an object to a reference of its superclass or interface T. Read more

Tries to downcast to a subclass or interface implementor T. Read more

Tries to downcast to a reference of its subclass or interface implementor T. Read more

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more

Casts to T unconditionally. Read more

Casts to &T unconditionally. Read more

Performs the conversion.

Performs the conversion.

Returns true if the object is an instance of (can be cast to) T.

Returns the type of the object.

Returns the ObjectClass of the object. Read more

Returns the class of the object.

Returns the class of the object in the given type T. Read more

Returns the interface T of the object. Read more

Similar to Self::set_property but fails instead of panicking.

Sets the property property_name of the object to value value. Read more

Similar to Self::set_property but fails instead of panicking.

Sets the property property_name of the object to value value. Read more

Similar to Self::set_properties but fails instead of panicking.

Sets multiple properties of the object at once. Read more

Similar to Self::set_properties_from_value but fails instead of panicking.

Sets multiple properties of the object at once. Read more

Similar to Self::property but fails instead of panicking.

Gets the property property_name of the object and cast it to the type V. Read more

Similar to Self::property_value but fails instead of panicking.

Gets the property property_name of the object. Read more

Check if the object has a property property_name of the given type_. Read more

Get the type of the property property_name of this object. Read more

Get the ParamSpec of the property property_name of this object.

Return all ParamSpec of the properties of this object.

Freeze all property notifications until the return guard object is dropped. Read more

Set arbitrary data on this object with the given key. Read more

Return previously set arbitrary data of this object with the given key. Read more

Retrieve previously set arbitrary data of this object with the given key. Read more

Set arbitrary data on this object with the given key. Read more

Return previously set arbitrary data of this object with the given key. Read more

Retrieve previously set arbitrary data of this object with the given key. Read more

Block a given signal handler. Read more

Unblock a given signal handler.

Stop emission of the currently emitted signal.

Stop emission of the currently emitted signal by the (possibly detailed) signal name.

Similar to Self::connect but fails instead of panicking.

Connect to the signal signal_name on this object. Read more

Similar to Self::connect_id but fails instead of panicking.

Connect to the signal signal_id on this object. Read more

Similar to Self::connect_local but fails instead of panicking.

Connect to the signal signal_name on this object. Read more

Similar to Self::connect_local_id but fails instead of panicking.

Connect to the signal signal_id on this object. Read more

Similar to Self::connect_unsafe but fails instead of panicking.

Connect to the signal signal_name on this object. Read more

Similar to Self::connect_unsafe_id but fails instead of panicking.

Similar to Self::connect_closure but fails instead of panicking.

Connect a closure to the signal signal_name on this object. Read more

Similar to Self::connect_closure_id but fails instead of panicking.

Connect a closure to the signal signal_id on this object. Read more

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to Closure::invoke. Read more

Connect to the signal signal_id on this object. Read more

Similar to Self::emit but fails instead of panicking.

Emit signal by signal id. Read more

Similar to Self::emit_with_values but fails instead of panicking.

Same as Self::emit but takes Value for the arguments.

Similar to Self::emit_by_name but fails instead of panicking.

Emit signal by its name. Read more

Similar to Self::emit_by_name_with_values but fails instead of panicking.

Emit signal by its name. Read more

Similar to Self::emit_with_details but fails instead of panicking.

Emit signal by signal id with details. Read more

Similar to Self::emit_with_details_and_values but fails instead of panicking.

Emit signal by signal id with details. Read more

Disconnect a previously connected signal handler.

Connect to the notify signal of the object. Read more

Connect to the notify signal of the object. Read more

Connect to the notify signal of the object. Read more

Notify that the given property has changed its value. Read more

Notify that the given property has changed its value. Read more

Downgrade this object to a weak reference.

Bind property source_property on this object to the target_property on the target object. Read more

Returns the strong reference count of this object.

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

Returns a SendValue clone of self.

Converts the given value to a String. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.