Struct gio::Settings

pub struct Settings(_);

The Settings class provides a convenient API for storing and retrieving application settings.

Reads and writes can be considered to be non-blocking. Reading settings with Settings is typically extremely fast: on approximately the same order of magnitude (but slower than) a GHashTable lookup. Writing settings is also extremely fast in terms of time to return to your application, but can be extremely expensive for other threads and other processes. Many settings backends (including dconf) have lazy initialisation which means in the common case of the user using their computer without modifying any settings a lot of work can be avoided. For dconf, the D-Bus service doesn’t even need to be started in this case. For this reason, you should only ever modify Settings keys in response to explicit user action. Particular care should be paid to ensure that modifications are not made during startup – for example, when setting the initial value of preferences widgets. The built-in SettingsExtManual::bind() functionality is careful not to write settings in response to notify signals as a result of modifications that it makes to widgets.

When creating a GSettings instance, you have to specify a schema that describes the keys in your settings and their types and default values, as well as some other information.

Normally, a schema has a fixed path that determines where the settings are stored in the conceptual global tree of settings. However, schemas can also be ‘[relocatable][gsettings-relocatable]’, i.e. not equipped with a fixed path. This is useful e.g. when the schema describes an ‘account’, and you want to be able to store a arbitrary number of accounts.

Paths must start with and end with a forward slash character (‘/’) and must not contain two sequential slash characters. Paths should be chosen based on a domain name associated with the program or library to which the settings belong. Examples of paths are “/org/gtk/settings/file-chooser/” and “/ca/desrt/dconf-editor/”. Paths should not start with “/apps/”, “/desktop/” or “/system/” as they often did in GConf.

Unlike other configuration systems (like GConf), GSettings does not restrict keys to basic types like strings and numbers. GSettings stores values as glib::Variant, and allows any glib::VariantType for keys. Key names are restricted to lowercase characters, numbers and ‘-’. Furthermore, the names must begin with a lowercase character, must not end with a ‘-’, and must not contain consecutive dashes.

Similar to GConf, the default values in GSettings schemas can be localized, but the localized values are stored in gettext catalogs and looked up with the domain that is specified in the gettext-domain attribute of the <schemalist> or <schema> elements and the category that is specified in the l10n attribute of the <default> element. The string which is translated includes all text in the <default> element, including any surrounding quotation marks.

The l10n attribute must be set to messages or time, and sets the locale category for translation. The messages category should be used by default; use time for translatable date or time formats. A translation comment can be added as an XML comment immediately above the <default> element — it is recommended to add these comments to aid translators understand the meaning and implications of the default value. An optional translation context attribute can be set on the <default> element to disambiguate multiple defaults which use the same string.

For example:

 <!-- Translators: A list of words which are not allowed to be typed, in
      GVariant serialization syntax.
      See: https://developer.gnome.org/glib/stable/gvariant-text.html -->
 <default l10n='messages' context='Banned words'>['bad', 'words']</default>

Translations of default values must remain syntactically valid serialized GVariants (e.g. retaining any surrounding quotation marks) or runtime errors will occur.

GSettings uses schemas in a compact binary form that is created by the [glib-compile-schemas][glib-compile-schemas] utility. The input is a schema description in an XML format.

A DTD for the gschema XML format can be found here: gschema.dtd

The [glib-compile-schemas][glib-compile-schemas] tool expects schema files to have the extension .gschema.xml.

At runtime, schemas are identified by their id (as specified in the id attribute of the <schema> element). The convention for schema ids is to use a dotted name, similar in style to a D-Bus bus name, e.g. “org.gnome.SessionManager”. In particular, if the settings are for a specific service that owns a D-Bus bus name, the D-Bus bus name and schema id should match. For schemas which deal with settings not associated with one named application, the id should not use StudlyCaps, e.g. “org.gnome.font-rendering”.

In addition to glib::Variant types, keys can have types that have enumerated types. These can be described by a <choice>, <enum> or <flags> element, as seen in the [example][schema-enumerated]. The underlying type of such a key is string, but you can use SettingsExt::enum_(), SettingsExt::set_enum(), SettingsExt::flags(), SettingsExt::set_flags() access the numeric values corresponding to the string value of enum and flags keys.

An example for default value:

<schemalist>
  <schema id="org.gtk.Test" path="/org/gtk/Test/" gettext-domain="test">

    <key name="greeting" type="s">
      <default l10n="messages">"Hello, earthlings"</default>
      <summary>A greeting</summary>
      <description>
        Greeting of the invading martians
      </description>
    </key>

    <key name="box" type="(ii)">
      <default>(20,30)</default>
    </key>

    <key name="empty-string" type="s">
      <default>""</default>
      <summary>Empty strings have to be provided in GVariant form</summary>
    </key>

  </schema>
</schemalist>

An example for ranges, choices and enumerated types:

<schemalist>

  <enum id="org.gtk.Test.myenum">
    <value nick="first" value="1"/>
    <value nick="second" value="2"/>
  </enum>

  <flags id="org.gtk.Test.myflags">
    <value nick="flag1" value="1"/>
    <value nick="flag2" value="2"/>
    <value nick="flag3" value="4"/>
  </flags>

  <schema id="org.gtk.Test">

    <key name="key-with-range" type="i">
      <range min="1" max="100"/>
      <default>10</default>
    </key>

    <key name="key-with-choices" type="s">
      <choices>
        <choice value='Elisabeth'/>
        <choice value='Annabeth'/>
        <choice value='Joe'/>
      </choices>
      <aliases>
        <alias value='Anna' target='Annabeth'/>
        <alias value='Beth' target='Elisabeth'/>
      </aliases>
      <default>'Joe'</default>
    </key>

    <key name='enumerated-key' enum='org.gtk.Test.myenum'>
      <default>'first'</default>
    </key>

    <key name='flags-key' flags='org.gtk.Test.myflags'>
      <default>["flag1","flag2"]</default>
    </key>
  </schema>
</schemalist>

Vendor overrides

Default values are defined in the schemas that get installed by an application. Sometimes, it is necessary for a vendor or distributor to adjust these defaults. Since patching the XML source for the schema is inconvenient and error-prone, [glib-compile-schemas][glib-compile-schemas] reads so-called vendor override’ files. These are keyfiles in the same directory as the XML schema sources which can override default values. The schema id serves as the group name in the key file, and the values are expected in serialized GVariant form, as in the following example:

    [org.gtk.Example]
    key1='string'
    key2=1.5

glib-compile-schemas expects schema files to have the extension .gschema.override.

Binding

A very convenient feature of GSettings lets you bind glib::Object properties directly to settings, using SettingsExtManual::bind(). Once a GObject property has been bound to a setting, changes on either side are automatically propagated to the other side. GSettings handles details like mapping between GObject and GVariant types, and preventing infinite cycles.

This makes it very easy to hook up a preferences dialog to the underlying settings. To make this even more convenient, GSettings looks for a boolean property with the name “sensitivity” and automatically binds it to the writability of the bound setting. If this ‘magic’ gets in the way, it can be suppressed with the SettingsBindFlags::NO_SENSITIVITY flag.

Relocatable schemas # {gsettings-relocatable}

A relocatable schema is one with no path attribute specified on its <schema> element. By using with_path(), a Settings object can be instantiated for a relocatable schema, assigning a path to the instance. Paths passed to with_path() will typically be constructed dynamically from a constant prefix plus some form of instance identifier; but they must still be valid GSettings paths. Paths could also be constant and used with a globally installed schema originating from a dependency library.

For example, a relocatable schema could be used to store geometry information for different windows in an application. If the schema ID was org.foo.MyApp.Window, it could be instantiated for paths /org/foo/MyApp/main/, /org/foo/MyApp/document-1/, /org/foo/MyApp/document-2/, etc. If any of the paths are well-known they can be specified as <child> elements in the parent schema, e.g.:

<schema id="org.foo.MyApp" path="/org/foo/MyApp/">
  <child name="main" schema="org.foo.MyApp.Window"/>
</schema>

Build system integration # {gsettings-build-system}

GSettings comes with autotools integration to simplify compiling and installing schemas. To add GSettings support to an application, add the following to your configure.ac:

GLIB_GSETTINGS

In the appropriate Makefile.am, use the following snippet to compile and install the named schema:

gsettings_SCHEMAS = org.foo.MyApp.gschema.xml
EXTRA_DIST = $(gsettings_SCHEMAS)

@GSETTINGS_RULES@

No changes are needed to the build system to mark a schema XML file for translation. Assuming it sets the gettext-domain attribute, a schema may be marked for translation by adding it to POTFILES.in, assuming gettext 0.19 is in use (the preferred method for translation):

data/org.foo.MyApp.gschema.xml

Alternatively, if intltool 0.50.1 is in use:

[type: gettext/gsettings]data/org.foo.MyApp.gschema.xml

GSettings will use gettext to look up translations for the <summary> and <description> elements, and also any <default> elements which have a l10n attribute set. Translations must not be included in the .gschema.xml file by the build system, for example by using intltool XML rules with a .gschema.xml.in template.

If an enumerated type defined in a C header file is to be used in a GSettings schema, it can either be defined manually using an <enum> element in the schema XML, or it can be extracted automatically from the C header. This approach is preferred, as it ensures the two representations are always synchronised. To do so, add the following to the relevant Makefile.am:

gsettings_ENUM_NAMESPACE = org.foo.MyApp
gsettings_ENUM_FILES = my-app-enums.h my-app-misc.h

gsettings_ENUM_NAMESPACE specifies the schema namespace for the enum files, which are specified in gsettings_ENUM_FILES. This will generate a org.foo.MyApp.enums.xml file containing the extracted enums, which will be automatically included in the schema compilation, install and uninstall rules. It should not be committed to version control or included in EXTRA_DIST.

Implements

SettingsExt, glib::ObjectExt

Implementations

impl Settings

pub fn new(schema_id: &str) -> Settings

Creates a new Settings object with the schema specified by schema_id.

It is an error for the schema to not exist: schemas are an essential part of a program, as they provide type information. If schemas need to be dynamically loaded (for example, from an optional runtime dependency), SettingsSchemaSource::lookup() can be used to test for their existence before loading them.

Signals on the newly created Settings object will be dispatched via the thread-default glib::MainContext in effect at the time of the call to new(). The new Settings will hold a reference on the context. See glib::MainContext::push_thread_default().

schema_id

the id of the schema

Returns

a new Settings object

pub fn new_full<P: IsA<SettingsBackend>>(
    schema: &SettingsSchema,
    backend: Option<&P>,
    path: Option<&str>
) -> Settings

Creates a new Settings object with a given schema, backend and path.

It should be extremely rare that you ever want to use this function. It is made available for advanced use-cases (such as plugin systems that want to provide access to schemas loaded from custom locations, etc).

At the most basic level, a Settings object is a pure composition of 4 things: a SettingsSchema, a SettingsBackend, a path within that backend, and a glib::MainContext to which signals are dispatched.

This constructor therefore gives you full control over constructing Settings instances. The first 3 parameters are given directly as schema, backend and path, and the main context is taken from the thread-default (as per new()).

If backend is None then the default backend is used.

If path is None then the path from the schema is used. It is an error if path is None and the schema has no path of its own or if path is non-None and not equal to the path that the schema does have.

schema

a SettingsSchema

backend

a SettingsBackend

path

the path to use

Returns

a new Settings object

pub fn with_backend<P: IsA<SettingsBackend>>(
    schema_id: &str,
    backend: &P
) -> Settings

Creates a new Settings object with the schema specified by schema_id and a given SettingsBackend.

Creating a Settings object with a different backend allows accessing settings from a database other than the usual one. For example, it may make sense to pass a backend corresponding to the “defaults” settings database on the system to get a settings object that modifies the system default settings instead of the settings for this user.

schema_id

the id of the schema

backend

the SettingsBackend to use

Returns

a new Settings object

pub fn with_backend_and_path<P: IsA<SettingsBackend>>(
    schema_id: &str,
    backend: &P,
    path: &str
) -> Settings

Creates a new Settings object with the schema specified by schema_id and a given SettingsBackend and path.

This is a mix of with_backend() and with_path().

schema_id

the id of the schema

backend

the SettingsBackend to use

path

the path to use

Returns

a new Settings object

pub fn with_path(schema_id: &str, path: &str) -> Settings

Creates a new Settings object with the relocatable schema specified by schema_id and a given path.

You only need to do this if you want to directly create a settings object with a schema that doesn’t have a specified path of its own. That’s quite rare.

It is a programmer error to call this function for a schema that has an explicitly specified path.

It is a programmer error if path is not a valid path. A valid path begins and ends with ‘/’ and does not contain two consecutive ‘/’ characters.

schema_id

the id of the schema

path

the path to use

Returns

a new Settings object

pub fn sync()

Ensures that all pending operations are complete for the default backend.

Writes made to a Settings are handled asynchronously. For this reason, it is very unlikely that the changes have it to disk by the time g_settings_set() returns.

This call will block until all of the writes have made it to the backend. Since the mainloop is not running, no change notifications will be dispatched during this call (but some may be queued by the time the call is done).

pub fn unbind<P: IsA<Object>>(object: &P, property: &str)

Removes an existing binding for property on object.

Note that bindings are automatically removed when the object is finalized, so it is rarely necessary to call this function.

object

the object

property

the property whose binding is removed

Trait Implementations

impl Clone for Settings

fn clone(&self) -> Settings

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Settings

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for Settings

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Hash for Settings

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl Ord for Settings

fn cmp(&self, other: &Settings) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl ParentClassIs for Settings

type Parent = Object

impl<T: ObjectType> PartialEq<T> for Settings

fn eq(&self, other: &T) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: ObjectType> PartialOrd<T> for Settings

fn partial_cmp(&self, other: &T) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl StaticType for Settings

fn static_type() -> Type

Returns the type identifier of Self.

impl Eq for Settings

impl StructuralEq for Settings